88BLKTransAmGTA

I had my head unit rebuilt, stock amps
What speaker and subwoofer ohms should I be running with the UQ7 setup? Currently sitting in my garage are
4x6 front Kicker DS 30watt rms @4 ohms
4x6 rear Kicker DS 30watt rms @ 4 ohms
4" Goldwood sound 204/8s subwoofer 70watts rms @8 ohms
Want to make sure they are actually going be be a good sound before I install.

mantaguy

iTrader: (5)

for the stock UQ7 system Fronts should be 10 ohms rear 4 ohms and the subs 4 ohm I currently have fronts and rears at 10 ohms and stock 4 ohm subs.
I had read that it's ok to go from 4 ohms to 10 but not 10 ohms to 4,I forget where i read it ,I don't know how true that statement is,but my radio sounds great with the front and rears with 10 ohm speakers.I thinks it all has to do with the stock amp,not sure.
Good Luck with your build.

72buickgs

U can use 8 ohm instead of 10 ohm speakers, but cannot go from 8/10 to 4 ohm speakers. I have the stock speakers in my '84 T/A & sounds ok to me.

John in RI

iTrader: (167)

The factory head unit has 2 AMP chips; 1 chip that powers the 10 OHM front and 4 OHM rear 4x6s on the LEFT, & 1 chip that powers the 10 OHM front and 4 OHM rear 4x6 on the RIGHT. The 2 4 OHM Subwoofers are powered by the UQ7 Subwoofer AMP.

88BLKTransAmGTA

The subwoofers are a bad fit for the subwoofer hole. Anyone know of some subwpofers that will mount to the box mount spots?

mantaguy

iTrader: (5)

I'M not 100% sure ,but I think DynoDave may have tried a different size sub,Check with him,DynoDave,he has a whole thread about his.
Good Luck with your build

John in RI

iTrader: (167)

See post # 25,......

https://www.thirdgen.org/forums/car-...r-upgrade.html

DynoDave43

iTrader: (11)

I ended up repairing the foam surrounds on my factory speakers. As that worked, I never did try the aftermarket options.

https://www.thirdgen.org/forums/memb...ml#post6019018

88BLKTransAmGTA

I'm still on the hunt for some replacement subwoofers. Saw someone recommend fiero speakers replacements from Rodney Dickman. They don't have any.
I don't have my originals because sometime during its life someone replaced them with 6x9s. So kinda at a dead end.

John in RI

iTrader: (167)

There's a couple other potential replacement speakers listed by members in that thread I posted,........ read thru that thread for tips.

https://www.thirdgen.org/forums/car-...r-upgrade.html

John in RI

iTrader: (167)

Another potential replacement :

https://www.fiero.nl/forum/Archives/...-2-097104.html

Buddy

Not listed on the site, I believe Kee Audio has a package for this.

John in RI

iTrader: (167)

Tang Bang speaker and SB ACOUSTICS speakers both appear to be available,.....

TangBang W5-1138SMF
https://www.parts-express.com/Tang-B...Impact&irgwc=1

SB ACOUSTICS SB12PFCR25-4
https://solen.ca/en/products/sb-acou...midwoofer-4ohm

battmann

iTrader: (9)

is there an aftermarket amp that can be used with the UQ7 subwoofers? i have two factory UQ7 amps, but neither one seems to be working. wondering if i can use something modern instead.