Cooling Discuss all of the aspects of cooling that you can think of! Radiators, transmissions, electric fans, etc.

Foam in atifreeze Help

Thread Tools
 
Search this Thread
 
Old 10-20-2008, 05:35 PM
  #1  
Junior Member
Thread Starter
 
Jsonchevz's Avatar
 
Join Date: May 2008
Location: Ohio
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Car: 1985 IROC Z
Engine: 350
Transmission: T5
Axle/Gears: 3.73
Foam in atifreeze Help

It is jsut as the title says, I have foaam in the antifreeze about the consitency of soda foam. I checked the usual stuff like the oil and it checked fine its nice and gold still looks new. tourqued intake bolts down checked the cap all seem to be in working order. My car has a crate motor 350 with a 650 holley and a gear drive car still has great oil pressure and the temp dosen't go above 170, oh by the way this isa summer car only so i bypassed the heater core any ideas.???? Mabye air in the radiator? I know that usually foam in the radiator means head gasket, but the coolant is still nice and green. Any suggestions would be great.
Old 10-21-2008, 01:57 PM
  #2  
Senior Member
iTrader: (1)
 
jaykar's Avatar
 
Join Date: Apr 2004
Location: Prescott Valley AZ
Posts: 536
Likes: 0
Received 0 Likes on 0 Posts
Car: 87 Iroc Showcar - Saturday Nite Hun
Engine: 383 4-Bolt Truck Hyd Roller MiniRam
Transmission: B&M 700R4 - Edge 3200
Axle/Gears: BW 9 Bolt-TA Cover & Stud Kit - 3.2
Re: Foam in atifreeze Help

Would take alot of air in there to turn the anti freeze
foamy.

Jack the front of the car up pretty high, take the cap
off, and run it for awhile.
First, pull plugs and inspect for moisture.
Run Comp test with motor warmed up.

If done all of the above and still foamy, would suspect
head gasket
Old 10-21-2008, 09:05 PM
  #3  
Member
 
Joez88Camaro's Avatar
 
Join Date: Jul 2001
Location: Walnut Creek, CA
Posts: 444
Likes: 0
Received 0 Likes on 0 Posts
Car: 1988 Camaro Sport Coupe Convertible
Engine: Your Momma
Transmission: I can go forwards and backwards
Re: Foam in atifreeze Help

Agree, it takes a lot of air in the system to make coolant foamy, like huge giant bubble impossible. Head gasket though, eh, do the guaranteed test first. Go to a place that has an exhaust analyzer and check for HCs (gas) in the coolant while the car is warmed up. It only takes a few minutes so they shouldn't charge much and it's a pretty accurate way to check.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GeneralIesrussi
Carburetors
5
01-20-2020 01:06 PM
777Shock777
Tech / General Engine
4
10-29-2015 04:30 PM
Bizzy
V6
9
10-12-2001 11:37 PM
GTA88
Transmissions and Drivetrain
2
08-24-2001 09:01 PM



Quick Reply: Foam in atifreeze Help



All times are GMT -5. The time now is 11:58 AM.