HELP! won't crank, VATS?
#1
Junior Member
Thread Starter
Join Date: Jul 2014
Location: Indiana
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 305 TPI
Transmission: 5-Speed
Axle/Gears: 3:45
HELP! won't crank, VATS?
Just removed the wheel to replace turn signal switch, now won't even crank over. It is a 1988 Trans Am GTA with the factory security system. The security system is the only thing I think it could be, how can I bypass it, or what else should I be looking into?
#2
Supreme Member
iTrader: (2)
Join Date: Apr 2000
Location: Huntsville AL
Posts: 3,938
Received 98 Likes
on
62 Posts
Car: 88GTA
Engine: 5.7TPI
Transmission: Auto
Axle/Gears: 3.27
Re: HELP! won't crank, VATS?
the two white wires in the orange sleeve that runs down through the column might of gotten pinched. Look in the column some more. If it cranked before, it should crank now. Unless of course, you left the door open and drained the battery while you were doing the repair!
#3
Junior Member
Thread Starter
Join Date: Jul 2014
Location: Indiana
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 305 TPI
Transmission: 5-Speed
Axle/Gears: 3:45
Re: HELP! won't crank, VATS?
the two white wires in the orange sleeve that runs down through the column might of gotten pinched. Look in the column some more. If it cranked before, it should crank now. Unless of course, you left the door open and drained the battery while you were doing the repair!
Thread
Thread Starter
Forum
Replies
Last Post