Electronics Need help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?

Where does the high speed fan relay mount with a non-AC HVAC box?

Thread Tools
 
Search this Thread
 
Old 03-30-2019, 06:10 PM
  #1  
COTM Editor

Thread Starter
iTrader: (22)
 
QwkTrip's Avatar
 
Join Date: Mar 2001
Posts: 9,951
Likes: 0
Received 1,880 Likes on 1,284 Posts
Car: '89 Firebird
Engine: 7.0L
Transmission: T56
Where does the high speed fan relay mount with a non-AC HVAC box?

Thinking of pulling my AC box and installing a non-AC box for more room to work on engine.

1. Where does the fan high-speed relay get mounted with non-AC boxes? I don't see a provision on the box.

2. I have two boxes and they have different fan speed resistors. One is from a '85 Camaro and has 3 pins with 2 resistors. The other is from a ??? and has 4 pins with 3 resistors. Why the difference? I am guessing I want the 4 pin model to work with my 4-position fan switch in the HVAC head unit in dash.

Last edited by QwkTrip; 03-30-2019 at 06:21 PM.
Old 03-30-2019, 08:45 PM
  #2  
Junior Member
 
CorvairGeek's Avatar
 
Join Date: Nov 2017
Location: Gem State
Posts: 21
Received 0 Likes on 0 Posts
Engine: LG4
Transmission: 700R4/4L60
Axle/Gears: 2.73
Re: Where does the high speed fan relay mount with a non-AC HVAC box?

I've not seen a high fan relay in non-AC applications in this era. The non-AC fan is a lower amperage fan motor.
Old 03-30-2019, 09:07 PM
  #3  
Senior Member
 
WildCard600's Avatar
 
Join Date: Feb 2019
Location: SW Missouri
Posts: 721
Received 168 Likes on 133 Posts
Car: 1989 Trans Am
Engine: sp357
Transmission: T-5
Re: Where does the high speed fan relay mount with a non-AC HVAC box?

Originally Posted by QwkTrip
Thinking of pulling my AC box and installing a non-AC box for more room to work on engine.

1. Where does the fan high-speed relay get mounted with non-AC boxes? I don't see a provision on the box.

2. I have two boxes and they have different fan speed resistors. One is from a '85 Camaro and has 3 pins with 2 resistors. The other is from a ??? and has 4 pins with 3 resistors. Why the difference? I am guessing I want the 4 pin model to work with my 4-position fan switch in the HVAC head unit in dash.
You will have to get creative for the relay mounting. The non-A/C cars didn't have the relay.

The 4 pin resistor allows the extra fan speed for the A/C equipped cars. If you want to retain all 4 speeds you will need to reuse it.
Old 03-30-2019, 09:57 PM
  #4  
COTM Editor

Thread Starter
iTrader: (22)
 
QwkTrip's Avatar
 
Join Date: Mar 2001
Posts: 9,951
Likes: 0
Received 1,880 Likes on 1,284 Posts
Car: '89 Firebird
Engine: 7.0L
Transmission: T56
Re: Where does the high speed fan relay mount with a non-AC HVAC box?

I swapped the shorter cage over to my AC motor and everything seems to fit right.

Where are you guys buying the blower motor hose? That's the one part I'm missing.
Old 04-01-2019, 06:07 PM
  #5  
Supreme Member

 
NINÅ's Avatar
 
Join Date: Jan 2006
Location: Mooresville NC
Posts: 3,341
Likes: 0
Received 10 Likes on 10 Posts
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Knows About Hose

Originally Posted by QwkTrip
Where are you guys buying the blower motor hose
HomeDepot.

This is not a misprint, HomeDepot.


Happy Racing !



Funny Car Fun Fact:Funnys can twist the crank so far that sometimes cam lobes are ground offset from front to rear to re-phase the valve timing somewhere closer to synchronization with the pistons.
Old 04-01-2019, 06:33 PM
  #6  
COTM Editor

Thread Starter
iTrader: (22)
 
QwkTrip's Avatar
 
Join Date: Mar 2001
Posts: 9,951
Likes: 0
Received 1,880 Likes on 1,284 Posts
Car: '89 Firebird
Engine: 7.0L
Transmission: T56
Re: Where does the high speed fan relay mount with a non-AC HVAC box?

Huh. Who would have guessed. I'll give it a try!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
crazybird
Electronics
16
12-11-2013 03:23 PM
Bobby_80s
TPI
2
07-13-2012 01:36 AM
Damien00677
Mid-West Region
1
02-20-2012 11:16 AM
Stevolwevol
Electronics
7
07-29-2010 08:20 PM
aziroc
Cooling
2
07-19-2002 02:44 PM



Quick Reply: Where does the high speed fan relay mount with a non-AC HVAC box?



All times are GMT -5. The time now is 04:42 PM.