Custom Single Turbo Unit along with misallaneous items

Thread Tools
 
Search this Thread
 
Old 05-23-2006, 08:07 PM
  #1  
Supreme Member
Thread Starter
 
vortech305's Avatar
 
Join Date: Dec 2000
Location: United States
Posts: 2,078
Likes: 0
Received 0 Likes on 0 Posts
Custom Single Turbo Unit along with misallaneous items

Single Unit made for TPI engines. Cleared for NON AC units.

It has been installed but NEVER used. Made by BBS Designs and includes:

Turbo Header(Passenger side)
Driver side header
Crossover Pipe
Turbonetics Evolution Wastegate,billet(Brand New)
Accel Shorty spark Plugs(Brand New)
Percey Aluminum Square Header Gaskets(brand New)
All clamps
Custom inlet intake piping and silicone hoses
4"-3 Silicone Hose from Throttle body to Pipe(Included, but not viewed in pic)
Autometer white face Mechanical Boost gauge w/ hardware.(Brand New)

I WILL NOT SEPERATE, so please dont waste your time asking. I want to sell unit as complete. If you have other questions, feel free to ask. No ridiculous offers unless its in my favor and lets keep it clean. Turbocharger NOT included.

Accepting offer thru PM.

Installed(Notice, installation was not complete and i used Stock TB hose as temporary till the 4"-3" hose came in.)

Old 05-24-2006, 01:14 AM
  #2  
Senior Member

iTrader: (5)
 
355tpipickup's Avatar
 
Join Date: Feb 2005
Location: meridian, idaho
Posts: 691
Likes: 0
Received 0 Likes on 0 Posts
Car: 92 1500p\u 2wd
Engine: 91 z28 tpi 355
Transmission: 91 700r4
how much
Old 05-24-2006, 06:58 AM
  #3  
Supreme Member
Thread Starter
 
vortech305's Avatar
 
Join Date: Dec 2000
Location: United States
Posts: 2,078
Likes: 0
Received 0 Likes on 0 Posts
I have an idea on how much i want for it, But i'd rather get offers first.
Old 05-24-2006, 09:05 AM
  #4  
Junior Member
 
1990GTAboy's Avatar
 
Join Date: May 2006
Location: Alvarado Texas
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Car: 1990 Gta Trans Am V6 Turbo
Engine: V6 Turbo
Transmission: 700R4
Axle/Gears: I dont know I think they R stock
?

will it fit my GTA V6?
Old 05-24-2006, 09:10 AM
  #5  
Junior Member
 
SSP6's Avatar
 
Join Date: May 2006
Location: s. jersey
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Car: 89 formula/ 91 Formula
Engine: 1 355/ 1 305TBI
Transmission: 1 t56/ 1 A4
Axle/Gears: 1 4.10/ 1 3.42 both locked
thats a decent setup. i'd love to modify it for a carb. sweet deal man. did you build it yourself and where did you ource the t61 from?
Old 05-24-2006, 01:09 PM
  #6  
Supreme Member
Thread Starter
 
vortech305's Avatar
 
Join Date: Dec 2000
Location: United States
Posts: 2,078
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 1990GTAboy
will it fit my GTA V6?

Not unless you modify the hell out of it. It's made for a V8
----------
Originally Posted by SSP6
thats a decent setup. i'd love to modify it for a carb. sweet deal man. did you build it yourself and where did you ource the t61 from?
It was made by BBSDesigns. The T61 was purchased from a seperate source.

Last edited by vortech305; 05-24-2006 at 01:10 PM. Reason: Automerged Doublepost
Old 05-24-2006, 10:54 PM
  #7  
Junior Member
 
fbodycustoms's Avatar
 
Join Date: Nov 2005
Location: Hayden, Alabama
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Car: which one? 92 rs, 89 z28, 89 formula
Engine: 3.1, 5.0, 355
Transmission: auto, 5-speed, 6-speed
Originally Posted by 1990GTAboy
will it fit my GTA V6?
considering youd have to have to buy pacesetter v6 headers, or make ur own, and then modify them for a turbo
Old 05-25-2006, 06:49 AM
  #8  
Member

iTrader: (1)
 
85C4's Avatar
 
Join Date: Apr 2002
Location: PA
Posts: 235
Likes: 0
Received 0 Likes on 0 Posts
Car: whatever has the most gas in it
Engine: GM v8
Transmission: Uumm that's contingent
Axle/Gears: See prior line
How much for the turbo setup shipped to NJ 08872?
Old 05-25-2006, 07:08 AM
  #9  
Supreme Member
Thread Starter
 
vortech305's Avatar
 
Join Date: Dec 2000
Location: United States
Posts: 2,078
Likes: 0
Received 0 Likes on 0 Posts
Realistically the whole setup ran me a little over $1500.00. I'm looking at least $1350.00. I'm not trying to scumbag anyone, but at the same time i dont want to lose too much. There's always other places, just figured i'd start here. Thanks to those who were or are interested.
Old 05-28-2008, 11:32 AM
  #10  
Member
iTrader: (1)
 
MartinD's Avatar
 
Join Date: Apr 2006
Location: South Georgia
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Re: Custom Single Turbo Unit along with misallaneous items

Originally Posted by vortech305
Realistically the whole setup ran me a little over $1500.00. I'm looking at least $1350.00. I'm not trying to scumbag anyone, but at the same time i dont want to lose too much. There's always other places, just figured i'd start here. Thanks to those who were or are interested.


https://www.thirdgen.org/forums/clas...ortech305.html
Old 05-28-2008, 07:55 PM
  #11  
Supreme Member

iTrader: (3)
 
stage20's Avatar
 
Join Date: Jan 2004
Location: p'cola FL
Posts: 2,311
Likes: 0
Received 0 Likes on 0 Posts
Car: 88 iroc-z/28
Engine: 408 lsx
Transmission: 5800 stall
Axle/Gears: 4.71
Re: Custom Single Turbo Unit along with misallaneous items

mmmm buyer beware.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NORTz89
Suspension and Chassis
32
05-20-2020 03:51 PM
Street Lethal
Power Adders
634
04-30-2019 12:14 PM
sweet_87_iroc
Camaros for Sale
5
09-25-2015 10:01 PM
lt1z350
Suspension and Chassis
5
08-28-2015 05:57 AM



Quick Reply: Custom Single Turbo Unit along with misallaneous items



All times are GMT -5. The time now is 10:55 PM.