Cleaning out garage--double humps, posi, 10 bolt, 600dp, etc...
#1
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
Cleaning out garage--double humps, posi, 10 bolt, 600dp, etc...
Got a few parts layin around that I wanna get rid of.
Flywheel--NEVER USED!! I bought it not knowing it wouldnt fit a stock T5 Bellhousing. 168-Tooth, 12.00 in. Diameter, Steel, External Balance. Paid $200 new, will sell for $100+ship.
Double hump heads--w/ acc holes. I forgot to get the casting # when I was in the attic, Ill get it if someone is interested. THere is a small chip around one of the valve guide bosses, not sure what it even is. Also missing 1 rocker stud. Paid $100 but never used them I ended up gettin some Vortecs. $50+ship, might be better to pick up because of the weight.
Dual inlet air cleaner-- wouldnt fit over my holley, looks like an L69. Def. needs a good cleaning. $15+ship.
Posi carrier USED-- came out of an LT1 Camaro, stock gear was 2.77. Pinion nut came loose on a customers ride and slightly rode up onto posi case (see pic). Posi itself was working fine when removed, customer just wanted to go ahead and replace it. Sold to me for $100, will sell for $40+ship.
Aftermarket Hi-Rise spoiler-- fiberglass, has very small crack on one pillar (see pic). I put a little fiberglass resin over it to try and help it, but its nothing serious. painted in black primer now, will sell for $50+ship
Holley 600 double pumper (mech. secondaries). Model 4150 (4776). Just replaced power valve, everything else stock. Started pouring fuel out of secondary relief hose, but never looked into it. Im pretty sure its the float, but I never fooled around with it. Was rebuilt about 8 months/20 miles ago, just took off the car about a month ago. $60+ship.
3" Magnaflow Catalytic Converter--never used!! 3 way converter, summit part# MPE-94109. $30 shipped.
Dynomax Super Turbo muffler-- 3" inlet/outlet center/offset that I had on the car for about a month. summit part# WLK-17769 , $40 shipped.
I also have my Camaro for sale. It is listed in the cars for sale section. Sale is pending but not definite. Asking $5000 obo, see post for details/specs.
Email or PM me for shipping quotes, questions or anything else. Thanks for looking!!
PICS HERE
Flywheel--NEVER USED!! I bought it not knowing it wouldnt fit a stock T5 Bellhousing. 168-Tooth, 12.00 in. Diameter, Steel, External Balance. Paid $200 new, will sell for $100+ship.
Double hump heads--w/ acc holes. I forgot to get the casting # when I was in the attic, Ill get it if someone is interested. THere is a small chip around one of the valve guide bosses, not sure what it even is. Also missing 1 rocker stud. Paid $100 but never used them I ended up gettin some Vortecs. $50+ship, might be better to pick up because of the weight.
Dual inlet air cleaner-- wouldnt fit over my holley, looks like an L69. Def. needs a good cleaning. $15+ship.
Posi carrier USED-- came out of an LT1 Camaro, stock gear was 2.77. Pinion nut came loose on a customers ride and slightly rode up onto posi case (see pic). Posi itself was working fine when removed, customer just wanted to go ahead and replace it. Sold to me for $100, will sell for $40+ship.
Aftermarket Hi-Rise spoiler-- fiberglass, has very small crack on one pillar (see pic). I put a little fiberglass resin over it to try and help it, but its nothing serious. painted in black primer now, will sell for $50+ship
Holley 600 double pumper (mech. secondaries). Model 4150 (4776). Just replaced power valve, everything else stock. Started pouring fuel out of secondary relief hose, but never looked into it. Im pretty sure its the float, but I never fooled around with it. Was rebuilt about 8 months/20 miles ago, just took off the car about a month ago. $60+ship.
3" Magnaflow Catalytic Converter--never used!! 3 way converter, summit part# MPE-94109. $30 shipped.
Dynomax Super Turbo muffler-- 3" inlet/outlet center/offset that I had on the car for about a month. summit part# WLK-17769 , $40 shipped.
I also have my Camaro for sale. It is listed in the cars for sale section. Sale is pending but not definite. Asking $5000 obo, see post for details/specs.
Email or PM me for shipping quotes, questions or anything else. Thanks for looking!!
PICS HERE
Last edited by spills; 07-10-2006 at 06:14 PM.
#4
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
If need be I can pay for some of the shipping, Im needin some cash flow around the house.
#5
Member
Join Date: Apr 2005
Location: SO. CALIFORNIA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS
Engine: 305 TBI
Transmission: AUTO
Axle/Gears: 2.73
I am interested in the Cat. converter, where you going to use it on your car?? I cant get the summit site to pull up on my computer for some reason, should work on my 91 tbi 305 shouldnt it? (when I get 3 in. exhaust done....)
#6
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
Its a universal cat, so it should work. Its a 3-way cat which I am told is the most efficient. The only thing is that it doesnt have a hole for the smog pump tube because it doesnt need it. So you may be able to use it and just bypass the smog pump, but dont quote me on that.
And yes, I was going to use it on my car. Original plan was to make it street legal, but that never happened. Just put on a bullet and dumped it b4 the axle.
And yes, I was going to use it on my car. Original plan was to make it street legal, but that never happened. Just put on a bullet and dumped it b4 the axle.
Trending Topics
#13
Junior Member
Join Date: Jan 2005
Location: livonia mi
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 camaro 1985 camaro
Engine: 350 LT1/355 carb'd
Transmission: t-5/th350
Axle/Gears: 84 z28 posi/3.08 open diff
hey will that posi unit bolt into my stock 88 10 bolt rearend? will i have to buy different axles? does it come with gears?
#14
Senior Member
Thread Starter
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
It comes with the ring gear, but no pinion so youd have to get some gears. It will bolt into the casing, but you would need 28 spline axles (unless your car is already equipped, but i think 88 was still 26 spline)
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Engine/Drivetrain/Suspension Parts for Sale
2
12-11-2023 08:14 AM
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
hectre13
Engine/Drivetrain/Suspension Parts for Sale
7
08-26-2015 08:17 AM