NX mainline nitrous system for EFI w extras
03-01-2007, 07:56 PM
#1
Supreme Member
Thread Starter
Join Date: Dec 2001
Location: Newark, DE
Posts: 1,960
Likes: 0
Received 1 Like
on
1 Post
Car: 2006 Corvette
Engine: LS2
Transmission: T56
Axle/Gears: 3.42s
NX mainline nitrous system for EFI w extras
up for sale is a new, never used, NX Mainline EFI system. it comes with pills for a 50 or 75 hp shot. never mounted in the car or used, just opened the box and examined the parts. i bought this for my 87' IROC, but sold the car to buy a house and no longer need this kit
since this is a "no frills" kit, NX wanted the owner to splice the rubber fuel line that leads to the fuel rail for the fuel supply. i didnt think this was exactly safe, so i bought the parts to tap into the shrader valve on the fuel rail instead. they will be included with the kit. i also purchased an autometer nitrous pressure gauge, which will be included with the kit as well
Summit or Jegs sells the kit alone for $400 + shipping. the gauge sells for about $45, and the parts needed for the fuel rail tap run about $40. im selling the entire setup for $350 shipped. thats $150 off what all the parts would cost if ordered from either supplier. payment must be by money order... ive had people withdraw funds with paypal payments, and have had personal checks bounce, so i dont trust either form of payment any longer. thanks for looking
since this is a "no frills" kit, NX wanted the owner to splice the rubber fuel line that leads to the fuel rail for the fuel supply. i didnt think this was exactly safe, so i bought the parts to tap into the shrader valve on the fuel rail instead. they will be included with the kit. i also purchased an autometer nitrous pressure gauge, which will be included with the kit as well
Summit or Jegs sells the kit alone for $400 + shipping. the gauge sells for about $45, and the parts needed for the fuel rail tap run about $40. im selling the entire setup for $350 shipped. thats $150 off what all the parts would cost if ordered from either supplier. payment must be by money order... ive had people withdraw funds with paypal payments, and have had personal checks bounce, so i dont trust either form of payment any longer. thanks for looking
03-08-2007, 02:41 PM
#4
Member
Join Date: Aug 2004
Location: Lubbock,Tx
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro
Engine: 3.1 V6
Transmission: 700R4
Would this work on an LT1? I am looking for a kit for my 94 Z28.
Happen to have pics as well?
Money order isn't a problem for me as I prefer that method anyways.
Thanks,
Mike
Happen to have pics as well?
Money order isn't a problem for me as I prefer that method anyways.
Thanks,
Mike
03-08-2007, 08:57 PM
#5
Supreme Member
Thread Starter
Join Date: Dec 2001
Location: Newark, DE
Posts: 1,960
Likes: 0
Received 1 Like
on
1 Post
Car: 2006 Corvette
Engine: LS2
Transmission: T56
Axle/Gears: 3.42s
this would work on your LT1, its universal for GM EFI since i bought the fuel rail tap parts. sorry, no pics, but everything is brand new, never mounted
pics and info of the kit can be found on www.nitrousexpress.com. click on the "mainline" picture. remember, my kit will have a nitrous gauge and fuel rail line/connector not shown on the website
pics and info of the kit can be found on www.nitrousexpress.com. click on the "mainline" picture. remember, my kit will have a nitrous gauge and fuel rail line/connector not shown on the website
Last edited by tpivette89; 03-08-2007 at 09:01 PM. Reason: Automerged Doublepost
03-24-2007, 10:12 AM
#7
Supreme Member
Thread Starter
Join Date: Dec 2001
Location: Newark, DE
Posts: 1,960
Likes: 0
Received 1 Like
on
1 Post
Car: 2006 Corvette
Engine: LS2
Transmission: T56
Axle/Gears: 3.42s
Re: NX mainline nitrous system for EFI w extras
reduced to $300 shipped. im losing a hell of a lotta money on this kit, but i must sell. if no ones interested i guess ill sell it locally or on ebay
Trending Topics
03-24-2007, 06:45 PM
#8
Supreme Member
iTrader: (1)
Join Date: Mar 2002
Location: The nation's capital
Posts: 2,467
Likes: 0
Received 1 Like
on
1 Post
Car: 91 RS
Engine: 350 TBI
Transmission: 700R4
Re: NX mainline nitrous system for EFI w extras
Deleted. I figured it out.
Last edited by Gunny Highway; 03-24-2007 at 08:10 PM.
03-24-2007, 07:27 PM
#9
Senior Member
Join Date: Apr 2003
Location: CHICAGO
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 FORMULA 350
Engine: 5.7 L98
Transmission: 700R4
Axle/Gears: 9 BOLT/ 3.27 GEARS
Re: NX mainline nitrous system for EFI w extras
pm sent
----------
I'm intersted in this deal here. Can You send me a few pics and a part number please? Thanks! My email is rik89gta@yahoo.com
----------
I'm intersted in this deal here. Can You send me a few pics and a part number please? Thanks! My email is rik89gta@yahoo.com
Last edited by rik89gta; 03-24-2007 at 07:28 PM. Reason: Automerged Doublepost
03-25-2007, 11:55 PM
#11
Supreme Member
Thread Starter
Join Date: Dec 2001
Location: Newark, DE
Posts: 1,960
Likes: 0
Received 1 Like
on
1 Post
Car: 2006 Corvette
Engine: LS2
Transmission: T56
Axle/Gears: 3.42s
Re: NX mainline nitrous system for EFI w extras
sorry, no pics, but everything is brand new, never mounted. pics and info of the kit can be found on www.nitrousexpress.com. click on the "mainline" picture. remember, my kit will have a nitrous gauge and fuel rail line/connector not shown on the website
03-26-2007, 12:59 AM
#12
Senior Member
Join Date: Apr 2003
Location: CHICAGO
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 FORMULA 350
Engine: 5.7 L98
Transmission: 700R4
Axle/Gears: 9 BOLT/ 3.27 GEARS
Re: NX mainline nitrous system for EFI w extras
will take it if still for sale! Send me a pm with Your info.
03-27-2007, 02:59 AM
#13
Supreme Member
Thread Starter
Join Date: Dec 2001
Location: Newark, DE
Posts: 1,960
Likes: 0
Received 1 Like
on
1 Post
Car: 2006 Corvette
Engine: LS2
Transmission: T56
Axle/Gears: 3.42s
Re: NX mainline nitrous system for EFI w extras
rik89gta: for some reason, my comp isnt letting me send PMs tonight. in response to your question, yes, it is a wet kit. in fact:
since this is a "no frills" kit, NX wanted the owner to splice the rubber fuel line that leads to the fuel rail for the fuel supply. i didnt think this was exactly safe, so i bought the parts to tap into the shrader valve on the fuel rail instead. they will be included with the kit.
Thread
Thread Starter
Forum
Replies
Last Post
