MagnaFlow vs Flowmaster vs Borla vs Any Other Exhaust Brand
#1
TGO Supporter
Thread Starter
Join Date: Apr 2004
Location: Massachusetts
Posts: 4,224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28 & 21 Hellcat Challenger
Engine: L98, Hemi 6.2
MagnaFlow vs Flowmaster vs Borla vs Any Other Exhaust Brand
My brother and i are gonna add a new exhuast system in his 92 350. Seems like the most popular choices are Magnaflows, flowmaster or BORLAS. So you guys can be the judges on this... What do u think sounds, looks and performs better? Just doesnt have to be flowmasters and Magnaflows..
#3
Supreme Member
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
I already had the Flowmaster, it didn't really have a distinct sound to it...and I hated it. It sounded like , well.. nothing. Its quite hard to explain actually.
I recently put on a 3" Hooker Aerochamber catback and will never look back. And you can't beat the price for the flow and sound that it offers. Although I think the magnaflow & Banks setups look very nice!
I recently put on a 3" Hooker Aerochamber catback and will never look back. And you can't beat the price for the flow and sound that it offers. Although I think the magnaflow & Banks setups look very nice!
#4
Member
Join Date: May 2004
Location: AZ
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro
Engine: 305
Transmission: A4
Hooker aerochamber is really nice like 335 said....and then Magnaflows are great for performance. I have only ever heard them on a 4th gen. the sound great as well. but for all i know the perform way better than slowmasters
#5
TGO Supporter
Thread Starter
Join Date: Apr 2004
Location: Massachusetts
Posts: 4,224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28 & 21 Hellcat Challenger
Engine: L98, Hemi 6.2
I usually hear that FLOWMASTERS sound much better then Magnaflows, but Magnaflows perform way better. Also i heard on this board that FlowMasters lose HP, is this true?????
#6
Supreme Member
Originally posted by nick418
I usually hear that FLOWMASTERS sound much better then Magnaflows, but Magnaflows perform way better. Also i heard on this board that FlowMasters lose HP, is this true?????
I usually hear that FLOWMASTERS sound much better then Magnaflows, but Magnaflows perform way better. Also i heard on this board that FlowMasters lose HP, is this true?????
Trending Topics
#9
Supreme Member
Join Date: Aug 2003
Location: Long Island New York
Posts: 1,644
Likes: 0
Received 3 Likes
on
3 Posts
Car: 89 Formula 350
Engine: Forged 385 H/C/I
Transmission: 700R4-4300 Stall-lockup
Axle/Gears: BW 9 Bolt 3:70
I used to have the Flowmaster system it sounded pretty good but I have recently replaced it with the Gale Banks system. I'm very happy with the Banks system. It is stainless like the Borla setup but cost less then Flowmaster. You get the best of both worls with it. The Banks system used to cost more then Borla when it came out in the 80's but you can get it for around $250 now. www.bankspower.com
#11
Member
Join Date: Jun 2000
Location: corvallis. or
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 iroc
Engine: 350 tpi
Transmission: 700r4
well I am a bit biased. I as I age I only like to do things once so I pretty much only use stainless exhuast aymore. IT is so nice to never see rusty exhaust.
I have really come to like the sound of borla exhuast. that being said thier thirdgen choices are so so. thier kit is kind of weak. I don't like the ajustable system even though the sound is nice. I hated the fact that the center pipe was not full lenght so to so full stainless the kit requierd custom work. they do have a tailpipe section as well that is crossflow design I have seen them on ebay for $250 but never heard it. I have thoughabout putting an xr-1 up where the cat is supposed to go. I have heard xr-1's on a 99+ mustang and it sounded awesome. I have the regular borla on my mustang I love the sound. I am not a big fan of the "quad" tip look. I like two pipes flush with the rear. that of course is just me. the got rid of the ajustable kit on my 88 and put flowmaster on and just kicked myself in butt after doing so. I wanted louder and it was but it was just that "loud" the borla just sounded better IMO.
Magnaflow makes a kit fot eh 98-02 f-body's that is not a crossflow and sounds pretty mean they have a clip on their site. I think I am going to retrofit this kit to my car. full stainless kit for $400 and sounds better than the banks IMO. they also have a kit for the 93-97 ($300) that uses a crossflow muffler does not sound as good as the one I posted above IMO. too me bottom line normal muffler usually sounds better than crossflow.
banks if you like the sound the best priced direct bolt in kit for the 3rdgen. I like the magnaflow better so I am going with it. when putting on exhasut sound is everything you have to like what you hear.
Flowmaster has a great following due to the sound. does not flow as well as most other muffler. the most popular muffer hence you hear them on ever other car. Claim to be classic american muscle yet have not been around long enough to be classic at all. aluminized. they do make just stainless mufflers now. I quit using them just do to the fact they get outflowed and they did not use to make stainless. that being said 80 people will post in how much they love thier flowmasters. if you live anywhere near salt air or where they salt road stay clear of rustmaster.
I like borla, bassani, magnaflow as far as sound.
I have really come to like the sound of borla exhuast. that being said thier thirdgen choices are so so. thier kit is kind of weak. I don't like the ajustable system even though the sound is nice. I hated the fact that the center pipe was not full lenght so to so full stainless the kit requierd custom work. they do have a tailpipe section as well that is crossflow design I have seen them on ebay for $250 but never heard it. I have thoughabout putting an xr-1 up where the cat is supposed to go. I have heard xr-1's on a 99+ mustang and it sounded awesome. I have the regular borla on my mustang I love the sound. I am not a big fan of the "quad" tip look. I like two pipes flush with the rear. that of course is just me. the got rid of the ajustable kit on my 88 and put flowmaster on and just kicked myself in butt after doing so. I wanted louder and it was but it was just that "loud" the borla just sounded better IMO.
Magnaflow makes a kit fot eh 98-02 f-body's that is not a crossflow and sounds pretty mean they have a clip on their site. I think I am going to retrofit this kit to my car. full stainless kit for $400 and sounds better than the banks IMO. they also have a kit for the 93-97 ($300) that uses a crossflow muffler does not sound as good as the one I posted above IMO. too me bottom line normal muffler usually sounds better than crossflow.
banks if you like the sound the best priced direct bolt in kit for the 3rdgen. I like the magnaflow better so I am going with it. when putting on exhasut sound is everything you have to like what you hear.
Flowmaster has a great following due to the sound. does not flow as well as most other muffler. the most popular muffer hence you hear them on ever other car. Claim to be classic american muscle yet have not been around long enough to be classic at all. aluminized. they do make just stainless mufflers now. I quit using them just do to the fact they get outflowed and they did not use to make stainless. that being said 80 people will post in how much they love thier flowmasters. if you live anywhere near salt air or where they salt road stay clear of rustmaster.
I like borla, bassani, magnaflow as far as sound.
#12
Junior Member
Join Date: Feb 2004
Location: Iowa
Posts: 90
Likes: 0
Received 3 Likes
on
3 Posts
Car: 89 RS Convertible
Engine: 350 Carbed, No Computer
Transmission: 700R4
I just got done with mine. I went with a 2 1/2" IMCO. It looks good now and went on without a hitch. It is nice and mellow at idle, but a little raspy when getting into the throttle. Removing the cat (just today) played a big part in that.
#14
Senior Member
Join Date: Jul 2001
Location: Louisville Kentucky U.S.A.
Posts: 667
Likes: 0
Received 2 Likes
on
2 Posts
Car: 86 Iroc Z
Engine: 406
Transmission: 350 Turbo
Axle/Gears: 373
I like my x-pipe setup with dual bullet mufflers. Its got a deep sound that I was looking for. Its not to loud like most people think and I 'm surprised about that considering my motor is built pretty good.
#15
Member
Join Date: Jun 2004
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 pontiac firebird
Engine: 305 V8 flo-pro exhaust
Transmission: automatic 700r4 4speed
Axle/Gears: stock 2.73's :(
go with borla not only do they sound the best they also flow real good i plan on gettin a borla exhasut for my z
#16
TGO Supporter
Thread Starter
Join Date: Apr 2004
Location: Massachusetts
Posts: 4,224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28 & 21 Hellcat Challenger
Engine: L98, Hemi 6.2
I like Maganflows. THey dont sound too loud (not a Cop Magnet) But they have a nice flow sound when you push the pedal. Plus i love Maganflows looks the best. Borlas kinda look ugly (imo) but they still sound great
Thread
Thread Starter
Forum
Replies
Last Post