14101128 vette heads
#1
Member
Thread Starter
Join Date: Oct 2000
Location: Richmond, Yorkshire, U.K
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
14101128 vette heads
These are the earlier vette heads before the raised d exhaust port type.
Would they fit my 88 L98 engine? Do they have centre bolt valve covers and will all the accessories bolt up?
Thanks
Simon
Would they fit my 88 L98 engine? Do they have centre bolt valve covers and will all the accessories bolt up?
Thanks
Simon
#2
They will bolt to your block. Accessory holes are provided in all the correct locations. They are the older style perimeter bolt rocker covers, and 90° intake flange bolt holes in all locations. Your '88 intake my have clearance issuse with the four center bolts, even with clearance hole elongation.
#3
Member
Thread Starter
Join Date: Oct 2000
Location: Richmond, Yorkshire, U.K
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Vader. From the picture below it looks like the heads have centre bolt valve covers. Are you certain they are perimeter?
Have you any idea how much aluminium heads weigh so I can calculate postage costs?
Thanks
Simon
Have you any idea how much aluminium heads weigh so I can calculate postage costs?
Thanks
Simon
#4
Member
Thread Starter
Join Date: Oct 2000
Location: Richmond, Yorkshire, U.K
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
I'm trying to add a little power to my car and havent much money. I was thinking a set of vette heads which I could port and a zz4 cam may be an option. But due to high shipping costs to the UK do you think I should just buy the cam and work on my stock heads?
I think I need to order the following parts also valve springs, retainers, gasket set (should I order a vette tpi set if the heads are alloy?), screw in rocker arm studs if I stick with iron heads. Can you think of anything else? Are the stock valve locks OK? Do I need shims for the springs?
Thank you
Simon
I think I need to order the following parts also valve springs, retainers, gasket set (should I order a vette tpi set if the heads are alloy?), screw in rocker arm studs if I stick with iron heads. Can you think of anything else? Are the stock valve locks OK? Do I need shims for the springs?
Thank you
Simon
Trending Topics
#8
Supreme Member
Join Date: Jun 2002
Location: Welland, Ontario, Canada
Posts: 3,331
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Monte Carlo SS...
Engine: T.P.I L98.
Transmission: TH350
Axle/Gears: 3:73 Posi
Those do appear to be centre bolt heads, yes. By the cast # they are 86-87 Aluminum 58cc angle plug heads. Perimiter bolts heads have holes around the outside along the gasket ledge. Those can be fun to yes headers with due to the angle plugs.
#9
Member
Thread Starter
Join Date: Oct 2000
Location: Richmond, Yorkshire, U.K
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for confirming what I thought. I have SLP 1 5/8 headers I'll have to search if vette heads with angle plugs are OK. Not having the raised exhaust ports they should match the headers better.
Simon
Simon
Thread
Thread Starter
Forum
Replies
Last Post
92projectcamaro
Engine/Drivetrain/Suspension Parts for Sale
11
01-18-2016 08:00 AM
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
09-28-2015 12:35 AM