What is this going into intake manifold?
#1
Junior Member
Thread Starter
Join Date: May 2013
Location: Fort Worth, Texas
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28
Engine: 383 Stroker with edelbrock heads
Transmission: 700R4
Axle/Gears: 4.10 Posi
What is this going into intake manifold?
This is located between the distributor and throttle body and it has a hollow black wire coming from it that was cut in half trying to figure out what this wire is? cause my car is idling and running like crap all of the sudden please help!!
#3
Junior Member
Thread Starter
Join Date: May 2013
Location: Fort Worth, Texas
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28
Engine: 383 Stroker with edelbrock heads
Transmission: 700R4
Axle/Gears: 4.10 Posi
Re: What is this going into intake manifold?
so with that being cut in half that could be why my car is idling rough and will almost stall at heavy throttle?
#5
Junior Member
Thread Starter
Join Date: May 2013
Location: Fort Worth, Texas
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28
Engine: 383 Stroker with edelbrock heads
Transmission: 700R4
Axle/Gears: 4.10 Posi
Re: What is this going into intake manifold?
You nailed it it's having trouble idling, and when you accelerate it stalls or pings really hard
#6
Member
Join Date: Apr 2012
Location: Hilo, Hawaii
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro rs
Engine: 92 350ci carbed
Transmission: 700r
Axle/Gears: Stock 10 bolt 2:73 gears 😭
Re: What is this going into intake manifold?
Vacuum, just get a new line and you should be fine as long as that's the only problem.
#7
Junior Member
Thread Starter
Join Date: May 2013
Location: Fort Worth, Texas
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28
Engine: 383 Stroker with edelbrock heads
Transmission: 700R4
Axle/Gears: 4.10 Posi
Re: What is this going into intake manifold?
So today i plugged that vacuum line and now i'm getting backfire through the tbi, flames and etc...
Trending Topics
#9
Junior Member
Thread Starter
Join Date: May 2013
Location: Fort Worth, Texas
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28
Engine: 383 Stroker with edelbrock heads
Transmission: 700R4
Axle/Gears: 4.10 Posi
Re: What is this going into intake manifold?
EST? and i did have a distributor change recently, the car was running but sounded like crap and now after plugging that vacuum the right way i get flame through throttle body
#11
Junior Member
Thread Starter
Join Date: May 2013
Location: Fort Worth, Texas
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28
Engine: 383 Stroker with edelbrock heads
Transmission: 700R4
Axle/Gears: 4.10 Posi
Re: What is this going into intake manifold?
so basically disconnect the wiring to the distributor and re find tdc
#12
Sponsor
iTrader: (92)
Re: What is this going into intake manifold?
warm the engine up and turn it off. Disconnect the est and restart the engine . Loosen and adjust the distributor while using a timing light. I believe the L03 is set to tdc . If your emissions tag is still present it will state the timing spec.
#13
Junior Member
Thread Starter
Join Date: May 2013
Location: Fort Worth, Texas
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28
Engine: 383 Stroker with edelbrock heads
Transmission: 700R4
Axle/Gears: 4.10 Posi
Re: What is this going into intake manifold?
so you cannot adjust the timing with the electronics hooked up to the back of the distributor?
#14
Member
Join Date: Apr 2012
Location: Hilo, Hawaii
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro rs
Engine: 92 350ci carbed
Transmission: 700r
Axle/Gears: Stock 10 bolt 2:73 gears 😭
Re: What is this going into intake manifold?
It's not supposed to be plugged its supposed to be reconnected
#16
Junior Member
Thread Starter
Join Date: May 2013
Location: Fort Worth, Texas
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28
Engine: 383 Stroker with edelbrock heads
Transmission: 700R4
Axle/Gears: 4.10 Posi
Re: What is this going into intake manifold?
i didn't know that sorry i don't know much about timing i had those connected when i was trying to find tdc
#17
Junior Member
Thread Starter
Join Date: May 2013
Location: Fort Worth, Texas
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28
Engine: 383 Stroker with edelbrock heads
Transmission: 700R4
Axle/Gears: 4.10 Posi
Re: What is this going into intake manifold?
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
86CamaroDan
Engine/Drivetrain/Suspension Parts for Sale
2
09-29-2015 10:08 PM