Knock Sensor Question - urgent!
11-23-2002, 04:45 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Long Island NY
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Knock Sensor Question - urgent!
The car is an '86 Vette.. I saw there is no wire on the knock sensor but there are a few wires dangling nearby. What color wire goes on the knock sensor?
Also which wire goes on the coolant sensor on the drivers side cylinder head? Green right?
Also which wire goes on the coolant sensor on the drivers side cylinder head? Green right?
11-23-2002, 05:57 PM
#2
Supreme Member
Welcome to 3rd gen.org...the home of Camaro's and 'Birds...not Vette's
If noone replies, I'd suggest searching the Vette Forums for your answers. Good luck.
If noone replies, I'd suggest searching the Vette Forums for your answers. Good luck.
11-24-2002, 11:43 AM
#3
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Long Island NY
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Hey moron,
I've been on here for years as another name but forgot my password. I had an '87 Camaro, '88 L98 Iroc, and '89 ASC GTA, and TPI is TPI whether its in a camaro, vette, or even a '32 Ford..
so if you can't answer my question, please refrain from comments
I've been on here for years as another name but forgot my password. I had an '87 Camaro, '88 L98 Iroc, and '89 ASC GTA, and TPI is TPI whether its in a camaro, vette, or even a '32 Ford..
so if you can't answer my question, please refrain from comments
11-24-2002, 12:10 PM
#4
Supreme Member
Geez, and I thought I was being helpful. The was no malice or flaming in my reply, nor none intended.
Also, I believe on my '89 it's white
Also, I believe on my '89 it's white
Last edited by 8Mike9; 11-24-2002 at 02:22 PM.
11-24-2002, 05:07 PM
#5
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Long Island NY
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
no problem. Did it also have a metal tab with a mounting bolt hole a few inches from the connector? Cuz that's dangling around along with another dark wire
11-24-2002, 10:59 PM
#6
Supreme Member
I want to say white as well, and the cts wire is green. I'm not sure what you mean by the bolt hole, but last time I checked the wire(when it wasn't hooked up on my last engine, heh), it had some kind of pointed metal thing on the end of it. I think it pulled out of the sensor when I changed my starter or something. If that other wire is black it may go to the fan switch.
11-24-2002, 11:23 PM
#7
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Long Island NY
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
OK from what I read the CTS should be near the throttle body. There's another coolant sensor on the drivers side of the engine, and there's a green wire which i'm told is a fan switch. It's in teh same split loom tubing as the fan's power wires.
In other words, i'm still baffled.
In other words, i'm still baffled.
Trending Topics
11-25-2002, 01:23 AM
#8
Supreme Member
Sorry, by cts I meant sender not sensor. The green wire is for this on the drivers side head, it runs the temp guage in the dash. The black wire on the passenger side is for the fan switch, also in the head.
11-25-2002, 01:30 AM
#9
Member
Join Date: Aug 2002
Location: Charleston, SC
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
I would say white as well, but if it doesn't help you can check out www.scfyb.com or http://pub21.ezboard.com/bscfyb, they don't discriminate against corvettes
Thread
Thread Starter
Forum
Replies
Last Post
