seiplentz

iTrader: (2)

Will OEM c6 18 and 19s fit without mods? Im running a 4th gen rear and ls1 front brakes stock ride height. From what Ive found Ill need 2" spacers up front. Tires on them are 245/40/18 and 285/35/19. My car is freshly painted I cant do any fender mods at this point so If they wont fit ill pass on them..

Orr89RocZ

iTrader: (20)

Rear might need additional spacer if 79mm offset 10” wide wheels. Some inner well mods in the front portion of the rear wells needed too

ShiftyCapone

iTrader: (7)

You will need spacers for the rear too. I am not sure what thickness, I have C6 wheels as rollers right now and I think I have a 1.25" rear spacer.

seiplentz

iTrader: (2)

Even with the 4th gen rear?

Orr yes they 10" wide. Would it just be a miner BFH to the front of the wells?

Orr89RocZ

iTrader: (20)

I have a hubcentric 5/8 slip on rear spacer on my 4th gen spec rear and the fit is perfect but does need well mods with 295’s. Idk about 285’s

yes just hammering in a corner

without the spacer may need alot more hammering and may need to cut the bumpstop

seiplentz

iTrader: (2)

Thanks!! These wheels I found are a steal with damn near new tires on them. Tough to pass up on but wanted to make sure they would fit without much agg considering its painted already..

seiplentz

iTrader: (2)

Where did you order your spacer from?

Orr89RocZ

iTrader: (20)

Skulte but they dont do them anymkre. Might even be out of business

RubberDucky

iTrader: (4)

You'll want a 1" spacer in the rear, and a 2" up front. I've got C6 wheels with a 95 Z28 rear.