California Edition RS
Supreme Member
iTrader: (1)
Joined: Mar 2003
Posts: 2,177
Likes: 0
From: north plainfield, nj
Car: 05' GTO
Engine: 6.0L
Transmission: A4
someone rip your wing off?
dunno looks weird with out the wing, always lookin at your car havin the wing and then its gone, now its weird. looks good still.
edit: put a 91-92 z28 wing on there and it would look killer with the lights, hood, and fender vents.
dunno looks weird with out the wing, always lookin at your car havin the wing and then its gone, now its weird. looks good still. edit: put a 91-92 z28 wing on there and it would look killer with the lights, hood, and fender vents.
The wing was taken off to re-seal the back with some more rust proofing......also put some new bolts in there becaues the old ones were about 2 years old.....
Another low-angle shot....
Another low-angle shot....
Trending Topics
Senior Member

Joined: Dec 2001
Posts: 862
Likes: 3
From: Cheektowaga., NY, USA
Car: 91 Camaro RS
Engine: 305 TBI LO3
I like the ascd hood, billet grill and clear markers..personally if it were me i'd go w/different rims, and maybe the 91/92 spoiler..but w/out the wing in my opinion is an improvement
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Wow, I never thought I'd like it with no spoiler at all, but I like it. Keep it off (even though I know you won't
)
) Senior Member
Joined: Mar 2002
Posts: 539
Likes: 0
From: St.Louis, Missouri
Car: 91 Camaro RS
Engine: 3.1L V-6
Transmission: Fresh 700R4
I like it off (i never thought i would like any camaro with it off) but i think a fourthgen spoiler (like deadbird's) would really look sweet on your car maybe it's the combo of the hood and side scoops or something but it just seems to fit your car i'll try to photoshop one on in a few
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Originally posted by badandy247
i think a fourthgen spoiler (like deadbird's) would really look sweet on your car
i think a fourthgen spoiler (like deadbird's) would really look sweet on your car
Joined: Jan 2001
Posts: 3,188
Likes: 59
From: Conroe, TX
Car: 1987 GTA
Engine: LS1
Transmission: 4L60e
Put a wing back on there.
Don't take that to be approval of your current wing....it's just that our cars NEED a wing to look right. The bookshelf back there is just too big without a wing of some sort.
Don't take that to be approval of your current wing....it's just that our cars NEED a wing to look right. The bookshelf back there is just too big without a wing of some sort.
Senior Member
Joined: Mar 2002
Posts: 539
Likes: 0
From: St.Louis, Missouri
Car: 91 Camaro RS
Engine: 3.1L V-6
Transmission: Fresh 700R4
even though it's a horrible chop it just seems to flow with your hood and scoops but don't get it from the company deadbird got his from if you decide to do it get it from hawks he just finished his mold and he will work with you to make it right
and maybe a set of these rims (in the dark charcoal) while you're at it all the chicks would be like
and maybe a set of these rims (in the dark charcoal) while you're at it all the chicks would be like
Last edited by badandy247; Oct 21, 2003 at 10:14 PM.
Senior Member
Joined: Feb 2003
Posts: 556
Likes: 0
From: Edison, NJ
Car: 1991 Camaro RS
Engine: 305 TBI
Transmission: WCT5
badass bro... keep the wing off ... keep the more "stock" look... leave the wings for the "airplanes" your car looks sick with the wing off
Supreme Member
Joined: Oct 2002
Posts: 1,259
Likes: 0
From: Los Angeles, Ca.
Car: Base Firebird
Engine: TPI 350
Transmission: T56
Axle/Gears: D44
z28 high rise or that fourth gen spoiler....
i do think that your car is missing something without a spoiler on it, but i'm not too big a fan of the one u had on previously.... just my .02!
i do think that your car is missing something without a spoiler on it, but i'm not too big a fan of the one u had on previously.... just my .02!
Supreme Member
Joined: Apr 2003
Posts: 1,075
Likes: 0
From: Oregon
Car: GM & Jaguar
Engine: Various
Transmission: Various
Axle/Gears: Various
IT'S NEKKID!!!!! Holy toledo is so bare! I dug wit da spoiler! A 91/92 spoiler would look natural, a 4th gen Trans Am spoiler would be pretty stinkin' killer, and lastly, the old one looked great too 
BTW; Here's a little choppy choppy of some rims & emblems for ya (I was curious!) - Love the car homie, always have always will.
Supreme Member
Joined: Apr 2001
Posts: 1,101
Likes: 0
From: Surrey, BC Wheels:KMC Clocker 17"
Car: 1985 Trans Am
Engine: upgrading...
Transmission: upgrading...
i think it looks sweet with no wing.
not that i have all that much against your wing.. at least its the same color as the car, laf.
i've liked wingless f-bods since i saw Zepher's video of him doing a big burnout in front of his house in his multicolored wingless trans am.
not that i have all that much against your wing.. at least its the same color as the car, laf.
i've liked wingless f-bods since i saw Zepher's video of him doing a big burnout in front of his house in his multicolored wingless trans am.
Supreme Member
Joined: Jul 2003
Posts: 2,494
Likes: 0
From: Markham
Car: 1990 Camaro
Engine: 355ci
Transmission: TKO-600 5 speed
Axle/Gears: 3.73 10 bolt
With the wing it looks like a show car. People can walk up to the car and go hey that car looks really cool/nice and it kind of has the wholesome appeal to it. Now without the wing i think your car looks like its pissed off as hell and wants to kick someones ***...looks totally bad ***.
Senior Member
iTrader: (10)
Joined: Oct 2003
Posts: 666
Likes: 0
From: IL
Car: 91RS_92Z28
Engine: 5.0_5.7
Transmission: WCT5_WCT5
Axle/Gears: 3.08_3.42
Personally I never liked your ride till these shots.
A 3rd gen bird wing is a must for your car. It flows well with your other mods.
Those rims have got to go too.
Sell them and that wing to a honduh enthusiast.
Other than that, it's so fresh and so clean. big up
A 3rd gen bird wing is a must for your car. It flows well with your other mods.
Those rims have got to go too.
Sell them and that wing to a honduh enthusiast.
Other than that, it's so fresh and so clean. big up
Supreme Member
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
yeah, i am also diggin it without the wing. def. a clean look with the SS hood, and no wing. i say use the old wing for a coffee table in your living room, and never look back.
Member
Joined: Aug 2002
Posts: 300
Likes: 0
From: S**ky town of Weymouth, MA
Car: 88 IROC
Engine: 305 TPI
Transmission: 700R4
I think the wheels go with the spolier. If you put some nicer wheels on there(like I think you said something like a year ago you were going to
) it would look better without the spolier but the seem to be an ok combination if you like it.
Otherwise, I dont care what wheels or spoiler you have , cause your car looks all badass from the front:hail:
) it would look better without the spolier but the seem to be an ok combination if you like it. Otherwise, I dont care what wheels or spoiler you have , cause your car looks all badass from the front:hail:
Well it seems there are a lot of mixed reactions to the spoiler being gone.........
As many of you know plans take forever to come to life.......I plan on getting a 4th Gen rear in the near future (summer or fall 04), So the rims will have to be changed...
As TPIroc has already shown, It will be the Z06 wheels that are more then likely gonna be put on the car, unless i find something better in the meantime.....
The Neeper Synchro's are only temporary, I don't like the fact that they are WAY too open.....
Anyone want to photoshop a 4th Gen wing on there, I'm getting interested to see how it looks......
If you put some nicer wheels on there(like I think you said something like a year ago you were going to )
As TPIroc has already shown, It will be the Z06 wheels that are more then likely gonna be put on the car, unless i find something better in the meantime.....
The Neeper Synchro's are only temporary, I don't like the fact that they are WAY too open.....
Anyone want to photoshop a 4th Gen wing on there, I'm getting interested to see how it looks......
Supreme Member
iTrader: (1)
Joined: Jul 2001
Posts: 4,627
Likes: 5
From: Houston Area
Car: Faster
Engine: Than
Transmission: You!
No offense, but your car was hideous with that wing on there.
It looks better now!
The IROC 5 inch spoiler and the Chrome Z06's would do that car ALOT of justice! You are heading in the right direction! Congrats!
Just my $.02
It looks better now!
The IROC 5 inch spoiler and the Chrome Z06's would do that car ALOT of justice! You are heading in the right direction! Congrats!
Just my $.02
Senior Member
Joined: Mar 2002
Posts: 539
Likes: 0
From: St.Louis, Missouri
Car: 91 Camaro RS
Engine: 3.1L V-6
Transmission: Fresh 700R4
the chop that i did above is a fourthgen wing straight off deadbirds car, but i'm not very good at photochop so that's all i could get
Supreme Member
iTrader: (1)
Joined: Feb 2003
Posts: 2,024
Likes: 3
From: Marietta, GA
Car: 92 Z28
Engine: LS1
Transmission: T56
Axle/Gears: 3.73 10 bolt
Alba Blaze's and a 5"
I actually like it with no spoiler at all, but thats probably cause i didnt like the one you had on there. a 5" would be cool and still look diff instead of a z or something. I like tpi's photoshop of the wheels and emblems...it was missing some little horizontal silver stripes on the ground effects tho.. ; )
I actually like it with no spoiler at all, but thats probably cause i didnt like the one you had on there. a 5" would be cool and still look diff instead of a z or something. I like tpi's photoshop of the wheels and emblems...it was missing some little horizontal silver stripes on the ground effects tho.. ; )
Supreme Member
Joined: Apr 2001
Posts: 1,101
Likes: 0
From: Surrey, BC Wheels:KMC Clocker 17"
Car: 1985 Trans Am
Engine: upgrading...
Transmission: upgrading...
Originally posted by FLYNLOW92rs
It will be the Z06 wheels that are more then likely gonna be put on the car, unless i find something better in the meantime.....
It will be the Z06 wheels that are more then likely gonna be put on the car, unless i find something better in the meantime.....
Senior Member
Joined: Sep 2003
Posts: 583
Likes: 0
From: United States
Car: 1991 Z28
Engine: 305 TPI
Transmission: 700R4
I love the headlights and grill on the front, and I agree a 91-92 Z28 spoiler would look perfect on that car! I don't personally like the rims, but then I'm insanely picky about rims.
I love how you've added a ton of mods without giving the car a "pussyish" look like most ricers are sporting these days. Keep it up!
I love how you've added a ton of mods without giving the car a "pussyish" look like most ricers are sporting these days. Keep it up!
Senior Member
Joined: May 2002
Posts: 973
Likes: 0
From: Avondale, AZ, used to be seattle, washington
Car: 1978 Chevrolet C10
Engine: 350
Transmission: Turbo 350
Originally posted by badandy247
SUPER CRAPPY PHOTOCHOP HERE!!!!!
SUPER CRAPPY PHOTOCHOP HERE!!!!!
very cleanly done car man, keep it hanging. :lala:
Supreme Member
Joined: Jul 2003
Posts: 2,494
Likes: 0
From: Markham
Car: 1990 Camaro
Engine: 355ci
Transmission: TKO-600 5 speed
Axle/Gears: 3.73 10 bolt
see the thing is with the stance your car has it looks amazing without the wing. I love the stance actually looks aweomse with the back end being a litle higher then the front and it sloping down....all it needs is some bigger rims to fill in a little more of the wheel well's...and im not sure what id do with the wing situation....i wouldnt put a stock one on because it wouldnt fit with the rest of the car too custom, where as i wouldnt put the one on you had before either because that one is just not to my taste....
Member
Joined: Aug 2002
Posts: 357
Likes: 0
From: Knoxville, TN
Car: 1987 Pontiac Trans Am GTA, 1992 Chevrolet Camaro RS
Engine: Custom 350, 3.1 V6
Transmission: 700R4, 700R4
Those 4th gen SS wheels look nice, but I'd go with some else simply because you see them on a lot of other third gens on here. Your car is really customized, you need rims and a wing to match that.
Supreme Member
Joined: Oct 2002
Posts: 1,375
Likes: 0
From: Milan, MI
Car: 1999 Z28
Engine: LS1
Transmission: A4
I like the 5 " spoiler idea........or a 91-92 Z spoiler.........and also for rims.........maybe some boyd coddington rodders.......but i like the z06's on there
Supreme Member
Joined: Jul 2001
Posts: 1,408
Likes: 1
From: Paris, Tx. USA
Car: 89 RS
Engine: LS1
Transmission: TH350
Originally posted by 25THRSS
Just noticed the tailpipe sticking way out. Get rid of that too.
Just noticed the tailpipe sticking way out. Get rid of that too.
California IROC's (not RS's) have to be black IMHO anyways. I have gotten used to that wing over time, but I think it looks better without. The wheels arent that bad (better than stock anyways) but the Z06's look amazing on there. Love the hood. The grill I'm not too fond of. But its your car not mine.
Keep us informed.
Junior Member
Joined: Nov 2002
Posts: 86
Likes: 0
From: Selah, Wa
Car: 1987 camaro
Engine: 2.8 MPFI
Transmission: th7004r4
I like the grille he has on there, but i think it'd be cool if you could have that grille inside the ss hood air vent. What do u think? Can anyone photoshop that.
Junior Member
Joined: Jul 2003
Posts: 80
Likes: 0
From: Ellwood PA
Car: 89 formula
Engine: yup its in there
Transmission: no ,i had my shots
I LIKED THE WING THOUGHT IT WENT WELL WITH THE OTHER MODS WHAT ABOUT SPUN ALUMINUM COVERS LIKE ON OLD BONNIVLLE RACERS TO GO WITH THAT SMOOTH LOW LOOK SWEET RIDE ANYWAY
Thread
Thread Starter
Forum
Replies
Last Post
Elephantismo
Electronics
14
Feb 13, 2019 12:51 AM








