02 ss wheels on 3rd gen???pics??
Thread Starter
Senior Member



Joined: Jun 2005
Posts: 691
Likes: 16
From: Owasso, OK
Car: 87 iroc
Engine: 410 sbc
Transmission: tremec 3550
Axle/Gears: 30 spline 3.73
02 ss wheels on 3rd gen???pics??
anyone out there have the 10 spoke ss wheels on there camaro??i have a set and am currently in Iraq waiting for my car to be completed. just wanted to get a "good" visual of what it'll look like. thanks
Member
Joined: Jun 2004
Posts: 361
Likes: 1
From: Charlotte, NC
Car: 91 Firebird, white
Engine: L03 :(
Transmission: 700R4
Axle/Gears: 4th gen, 3.23
Heh, I LOVE these wheels...because I own them 
Here's a guy who has them on Camaro:
https://www.thirdgen.org/techbb2/sho...ht=10+spoke+SS
And check my CarDomain link in sig for pics on my Firebird.

Here's a guy who has them on Camaro:
https://www.thirdgen.org/techbb2/sho...ht=10+spoke+SS
And check my CarDomain link in sig for pics on my Firebird.
Senior Member
Joined: Nov 2004
Posts: 569
Likes: 0
From: San Diego
Car: 1985 Trans Am
Engine: LB9
Transmission: 700R4
If he's got time to wait for someone to reply, then he probably has time to spend ten minutes and search.
I guess that kind of logic makes me a dick. Oh well.
Lots of people have them, it's not hard to find at all. Searched for exact phrase "10 spoke ss rims." You'll need 1.5" spacers if you don't have them already.
bigdavesiroc, I hope I didn't come off sounding like an ***. If you're in the military, thanks for everything you guys are doing out there.
I guess that kind of logic makes me a dick. Oh well.Lots of people have them, it's not hard to find at all. Searched for exact phrase "10 spoke ss rims." You'll need 1.5" spacers if you don't have them already.
bigdavesiroc, I hope I didn't come off sounding like an ***. If you're in the military, thanks for everything you guys are doing out there.
Senior Member
iTrader: (10)
Joined: Oct 2003
Posts: 666
Likes: 0
From: IL
Car: 91RS_92Z28
Engine: 5.0_5.7
Transmission: WCT5_WCT5
Axle/Gears: 3.08_3.42
Thanks for taking the time to search for him.
I bet it was it was a tuff search with all those dudes blowin stuff up outside your house and trying to behead you.
I bet it was it was a tuff search with all those dudes blowin stuff up outside your house and trying to behead you.
Trending Topics
Senior Member

Joined: Sep 2002
Posts: 613
Likes: 0
From: Canada winnipeg
Car: '91 vert RS, '82 Z28
Engine: TBI 305, TPI 350
Transmission: Auto, 5 speed
are you sure its 1.5" spacers and not 2"????? i have these exact same rims and a friend just told me he could get me 1.5" spacers but i thought i needed 2"
Thread Starter
Senior Member



Joined: Jun 2005
Posts: 691
Likes: 16
From: Owasso, OK
Car: 87 iroc
Engine: 410 sbc
Transmission: tremec 3550
Axle/Gears: 30 spline 3.73
yea not much time over here to get on and just search the web. i have a few times, on spaces like yahoo and google, but never tried 10 spoke rims search. there is a 30 min. time limit on getting on a computer and most of that time i use talking to my wife. my iroc has been a working project for the past 7yrs. her father is the one doing my eng.
but thanks for the pics guys, the visual is what i needed. in case your were wondering, i work on 2 different model helo's. this is my second time over here. now not being as bad as last time. but we still get our occasion mortars. just lucky none have been too close, thanks and hope to chat with a few of you later on. dave
but thanks for the pics guys, the visual is what i needed. in case your were wondering, i work on 2 different model helo's. this is my second time over here. now not being as bad as last time. but we still get our occasion mortars. just lucky none have been too close, thanks and hope to chat with a few of you later on. dave
Supreme Member


Joined: Apr 2001
Posts: 1,342
Likes: 14
From: Dayton, O.
Car: 91 Camaro Z28
Engine: LS7
Transmission: M12/T56
Axle/Gears: 3.79
Originally posted by JungleMan
You need 2" spacers...I'm running those up front (4th gen rear) and it's just the perfect fit.
You need 2" spacers...I'm running those up front (4th gen rear) and it's just the perfect fit.
Thread Starter
Senior Member



Joined: Jun 2005
Posts: 691
Likes: 16
From: Owasso, OK
Car: 87 iroc
Engine: 410 sbc
Transmission: tremec 3550
Axle/Gears: 30 spline 3.73
i'll be getting the adapters from either hawks, or f-body motorsports. i can't remember but one of them sells them for 240.00 i believe they also are 2 inch.
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Just an FYI, if you run a hub/slip fit rotor brake upgrade like a C4, C5, or LS1 only go with a 1.5-1.75" spacer up front.
Ed
Ed
Supreme Member
Joined: Oct 2001
Posts: 3,155
Likes: 2
From: Louisville, Ky
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
IMO the 10 spoke ss wheels and the 93-97 camaro wheels look awesome on thirdgens. id like a set of the ss wheels for racing...
Supreme Member
iTrader: (10)
Joined: Dec 2000
Posts: 3,242
Likes: 3
From: Somewhere around the South Side of Chicago just crusin' in one of the Niteriders
Car: 92RS 25th Anniv./88 IROC Z28 Vert
Engine: 305 TBI w/Tpi Air / 305 TPI
Transmission: 700r4/700r4
Axle/Gears: Posi
What is the cost of a set of SS chrome rims both new and used.
price on rims
ok yall will hate me.. got mine off ebay came to 650 .. 730 with the shiping though still not bad.. as u see pretty clean shinyy no straches or dings. just finger print on them. look ebay up. if u want more pics email me. Dabige467@yahoo.com
Member
Joined: May 2005
Posts: 181
Likes: 0
From: Ringgold, Ga/ Nashville, TN
Car: 1989 Chevrolet Camaro
Engine: LT1
Transmission: 700R4
Axle/Gears: 2000 rear, 3.73, auburn locker
All the others have either white or chrome wheels. Mine are painted just like the 35th anniversary wheels.
I like them a lot. I have 2 inch spacers all the way around.
Oh, yeah I paid $200 dollars for the wheels with completely bald tires. All I had to do was shoot some clear on them and put em on.
I like them a lot. I have 2 inch spacers all the way around. Oh, yeah I paid $200 dollars for the wheels with completely bald tires. All I had to do was shoot some clear on them and put em on.
Last edited by LT1powered89; Jul 28, 2005 at 06:55 PM.
Originally posted by LT1powered89
All the others have either white or chrome wheels. Mine are painted just like the 35th anniversary wheels.
I like them a lot. I have 2 inch spacers all the way around.
Oh, yeah I paid $200 dollars for the wheels with completely bald tires. All I had to do was shoot some clear on them and put em on.
All the others have either white or chrome wheels. Mine are painted just like the 35th anniversary wheels.
I like them a lot. I have 2 inch spacers all the way around. Oh, yeah I paid $200 dollars for the wheels with completely bald tires. All I had to do was shoot some clear on them and put em on.
Junior Member
Joined: May 2004
Posts: 64
Likes: 0
From: Canada, K-W
Car: Camaro RS
Engine: 2.8 L
Transmission: Auto
Originally posted by LT1powered89
All the others have either white or chrome wheels. Mine are painted just like the 35th anniversary wheels.
I like them a lot. I have 2 inch spacers all the way around.
Oh, yeah I paid $200 dollars for the wheels with completely bald tires. All I had to do was shoot some clear on them and put em on.
All the others have either white or chrome wheels. Mine are painted just like the 35th anniversary wheels.
I like them a lot. I have 2 inch spacers all the way around. Oh, yeah I paid $200 dollars for the wheels with completely bald tires. All I had to do was shoot some clear on them and put em on.
Member
Joined: May 2005
Posts: 181
Likes: 0
From: Ringgold, Ga/ Nashville, TN
Car: 1989 Chevrolet Camaro
Engine: LT1
Transmission: 700R4
Axle/Gears: 2000 rear, 3.73, auburn locker
Originally posted by Tha_Villain
Is your car stock GM red??
Is your car stock GM red??
Member
Joined: May 2005
Posts: 181
Likes: 0
From: Ringgold, Ga/ Nashville, TN
Car: 1989 Chevrolet Camaro
Engine: LT1
Transmission: 700R4
Axle/Gears: 2000 rear, 3.73, auburn locker
Originally posted by CamarosRUS
defenitly looks hot. $200 is a good deal, whered ya get um?
defenitly looks hot. $200 is a good deal, whered ya get um?
Thread
Thread Starter
Forum
Replies
Last Post
1992rs/ss
NW Indiana and South Chicago Suburb
14
Jan 31, 2025 05:10 PM
1992rs/ss
Engine/Drivetrain/Suspension Parts for Sale
16
Jan 28, 2016 09:58 PM
Omega
Engine/Drivetrain/Suspension Parts for Sale
9
Oct 1, 2015 02:20 PM




. It does a body good. 
