In need of a firebird hood!
Thread Starter
Member
Joined: Jun 2006
Posts: 213
Likes: 0
From: Jenkintown, PA
Car: 00 F-bird/84 F-bird/88 Formula
Engine: 3.8L/2.8L/5.0L 305
In need of a firebird hood!
I bought my 1984 firebird off my friend, knowing she wanted her 2" cowl bolt on hood back...so, now im currently hoodless. Does anyone on here live in the greater philadelphia area have a 3rd gen firebird hood laying around? i'd like to get another 2" cowl...it completed to look so nicely...but i'll take anything. I'm tired of having a blanket over my engine.
Anyone know of any good junkyards in the philly area as well? i know there's TONS! but which ones do you reccomend?
Anyone know of any good junkyards in the philly area as well? i know there's TONS! but which ones do you reccomend?
Thread Starter
Member
Joined: Jun 2006
Posts: 213
Likes: 0
From: Jenkintown, PA
Car: 00 F-bird/84 F-bird/88 Formula
Engine: 3.8L/2.8L/5.0L 305

there she is in the showroom (excuse the craptastic qaulity, it was the dealerships picture taken from the internet)

and there she is in my driveway.
some A-hole decided to hog the street today, and didnt move over enough (we have narrow streets where i live, and people park on both sides b/c their dumb) and his mirror clipped mine...i turned around and sped after him, but he turned somewhere and i couldnt find him...oh well. he only put a scuff mark on it...and its a little wiggly...but other then that, no damage...my friend looked back and saw his and said it was effed up...so my beast wins again lol.
Thread Starter
Member
Joined: Jun 2006
Posts: 213
Likes: 0
From: Jenkintown, PA
Car: 00 F-bird/84 F-bird/88 Formula
Engine: 3.8L/2.8L/5.0L 305
yea, shes my baby. im currently working on restoring a '84 firebird. And in the process of saving up for a '88 camaro, and a '87 jeep wrangler (which is going to become my winter driver, since f-bodies suck in the snow). I plan to put a lift on the jeep, once i reinforce the frame, and go off roading
i also have a POS 89 dodge colt 4 speed in oregon...we live on a gravel road, so once i master driving stick, im gonna have fun beating that...
so im 17, with 3 cars...possibly/hopefully 2 more on the way lol. its an addiction, and a painfully expensive one.
i also have a POS 89 dodge colt 4 speed in oregon...we live on a gravel road, so once i master driving stick, im gonna have fun beating that...
so im 17, with 3 cars...possibly/hopefully 2 more on the way lol. its an addiction, and a painfully expensive one.
Trending Topics
Member
Joined: Mar 2006
Posts: 140
Likes: 0
From: Norway!
Car: 1982 Recaro T/A
Engine: 305 w/Carter carb.
Transmission: TH-350
Axle/Gears: stock
*envious*
whanna ad me to msn ??
Mr.Transam@hotmail.com
I'm also restoring/customising a 82 Bird now... need some more ppl to trade hints n tips with....
whanna ad me to msn ??
Mr.Transam@hotmail.com
I'm also restoring/customising a 82 Bird now... need some more ppl to trade hints n tips with....
Junior Member
Joined: Jun 2006
Posts: 95
Likes: 0
From: West Chester, PA / Brick, NJ
Car: 92 Dodge Dakota / 91 Jeep Cherokee
Engine: 5.9L / 4.0L
Transmission: A518 / NV3550
Axle/Gears: 8 1/4 w. 3.91's / D30&D44 w. 3.55
Hey baby.. what year range again were the hoods you need? I can do that search I told ya about right now. Let me know
Thread Starter
Member
Joined: Jun 2006
Posts: 213
Likes: 0
From: Jenkintown, PA
Car: 00 F-bird/84 F-bird/88 Formula
Engine: 3.8L/2.8L/5.0L 305
82 to 92...but this kid with the red GTA lives near collegeville has his for sale for 100$. im trying to see if i can get it.
Junior Member
Joined: Jun 2006
Posts: 95
Likes: 0
From: West Chester, PA / Brick, NJ
Car: 92 Dodge Dakota / 91 Jeep Cherokee
Engine: 5.9L / 4.0L
Transmission: A518 / NV3550
Axle/Gears: 8 1/4 w. 3.91's / D30&D44 w. 3.55
Originally Posted by 84FirebirdChick
82 to 92...but this kid with the red GTA lives near collegeville has his for sale for 100$. im trying to see if i can get it.
I guess we can pick it up in the Dakota.. or throw it on the roof of Jeepy? LOL. Thread Starter
Member
Joined: Jun 2006
Posts: 213
Likes: 0
From: Jenkintown, PA
Car: 00 F-bird/84 F-bird/88 Formula
Engine: 3.8L/2.8L/5.0L 305
yea, i was gonna ask you if we can go get it in the dakota...that would be schweet. i wanna check out his interior too...if its black, i wanna swipe the passanger and cargo area carpets...door panels...ill just paint the dash...i dunno. possibly his seats...but i may just get 4 gen. ebony seats...or reupolster mine...i need to find out whats cheaper...
i need to start getting parts and actually working on this POS car...i need to stop procrastinating...i guess i can work on the interior while in waiting on what to do with my engine an exhaust...blah. stupid POS bird...
i need to start getting parts and actually working on this POS car...i need to stop procrastinating...i guess i can work on the interior while in waiting on what to do with my engine an exhaust...blah. stupid POS bird...
Junior Member
Joined: Jun 2006
Posts: 95
Likes: 0
From: West Chester, PA / Brick, NJ
Car: 92 Dodge Dakota / 91 Jeep Cherokee
Engine: 5.9L / 4.0L
Transmission: A518 / NV3550
Axle/Gears: 8 1/4 w. 3.91's / D30&D44 w. 3.55
Originally Posted by 84FirebirdChick
yea, i was gonna ask you if we can go get it in the dakota...that would be schweet. i wanna check out his interior too...if its black, i wanna swipe the passanger and cargo area carpets...door panels...ill just paint the dash...i dunno. possibly his seats...but i may just get 4 gen. ebony seats...or reupolster mine...i need to find out whats cheaper...
i need to start getting parts and actually working on this POS car...i need to stop procrastinating...i guess i can work on the interior while in waiting on what to do with my engine an exhaust...blah. stupid POS bird...
i need to start getting parts and actually working on this POS car...i need to stop procrastinating...i guess i can work on the interior while in waiting on what to do with my engine an exhaust...blah. stupid POS bird...
Thread Starter
Member
Joined: Jun 2006
Posts: 213
Likes: 0
From: Jenkintown, PA
Car: 00 F-bird/84 F-bird/88 Formula
Engine: 3.8L/2.8L/5.0L 305
you better not be touching my car parts wise while in away in oregon...i must be present at all times whenever a wrench/screw driver/ etc goes near my car...lol.
dont try and suprise me with a brand new 350 and a 700r4 or something...anything like that...i wanna be around for the installation of everything.
otherwise someone will get hurt if they touch my baby lol.
dude, ask maureen how much i was flipping out when that A-hole hit my side view mirror today....i freaked out and turned around and sped after him, but i already lost him....****ing *******...i had like 2" between me and the parked cars, he had like...2 feet...or so. grrrr!!! i hate idiots! he was driving down the middle of the street then he saw me and swerved to his side of the road...but obviously not enough...he made me soooooo mad!
dont try and suprise me with a brand new 350 and a 700r4 or something...anything like that...i wanna be around for the installation of everything.
otherwise someone will get hurt if they touch my baby lol.
dude, ask maureen how much i was flipping out when that A-hole hit my side view mirror today....i freaked out and turned around and sped after him, but i already lost him....****ing *******...i had like 2" between me and the parked cars, he had like...2 feet...or so. grrrr!!! i hate idiots! he was driving down the middle of the street then he saw me and swerved to his side of the road...but obviously not enough...he made me soooooo mad!
Junior Member
Joined: Jun 2006
Posts: 95
Likes: 0
From: West Chester, PA / Brick, NJ
Car: 92 Dodge Dakota / 91 Jeep Cherokee
Engine: 5.9L / 4.0L
Transmission: A518 / NV3550
Axle/Gears: 8 1/4 w. 3.91's / D30&D44 w. 3.55
Originally Posted by 84FirebirdChick
you better not be touching my car parts wise while in away in oregon...i must be present at all times whenever a wrench/screw driver/ etc goes near my car...lol.
dont try and suprise me with a brand new 350 and a 700r4 or something...anything like that...i wanna be around for the installation of everything.
otherwise someone will get hurt if they touch my baby lol.
dude, ask maureen how much i was flipping out when that A-hole hit my side view mirror today....i freaked out and turned around and sped after him, but i already lost him....****ing *******...i had like 2" between me and the parked cars, he had like...2 feet...or so. grrrr!!! i hate idiots! he was driving down the middle of the street then he saw me and swerved to his side of the road...but obviously not enough...he made me soooooo mad!
dont try and suprise me with a brand new 350 and a 700r4 or something...anything like that...i wanna be around for the installation of everything.
otherwise someone will get hurt if they touch my baby lol.
dude, ask maureen how much i was flipping out when that A-hole hit my side view mirror today....i freaked out and turned around and sped after him, but i already lost him....****ing *******...i had like 2" between me and the parked cars, he had like...2 feet...or so. grrrr!!! i hate idiots! he was driving down the middle of the street then he saw me and swerved to his side of the road...but obviously not enough...he made me soooooo mad!
Hahahah was this the same mirror that was hit already? You are too funny / cute :-P
Thread Starter
Member
Joined: Jun 2006
Posts: 213
Likes: 0
From: Jenkintown, PA
Car: 00 F-bird/84 F-bird/88 Formula
Engine: 3.8L/2.8L/5.0L 305
no, it was the driver side mirror...theres only a scuff on it, maureen said she saw his...and it was effed up lol.
nothing happens to the 84 without my consent by the way...dont pull any suprises out of your a$$ with it...
nothing happens to the 84 without my consent by the way...dont pull any suprises out of your a$$ with it...
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
Mar 8, 2019 12:21 PM
Black89TA
Exterior Parts for Sale
9
Jul 23, 2016 10:42 AM




i use aim... 