Does anybody have any pics on what the spoiler clips look like.Their the
whitish looking clips that fasten down the 86 TA black rubber spoiler to the hatch.Really having trouble trying to find these.I really appreciate your help.

 

The part number is 20556524. It is discontinued IIRC.
But i ran the locator and there are some at a dealership in PA. They cost 4.83 each.
Their number is 1-888-870-0280. Best I can do for you.

This is the plastic clip.






Metal clips for the spoiler and frame.

Hope this helps.

 

Thanks firerider,I was afraid I was going to order the wrong part no.and those clips are what I need.Went to a GM dealer and they weren't sure if that was what I needed.Didn't want to order because their is no returns.
Thanks a lot,now I'll order them.

 

No problem, glad I could help.

 

Do You Know Of Any Dealer Or Store That Migh Sell These In The Los Angeles Area?

 

You have to go to a GM Dealer and they will give you a list on who has them in stock.Good luck finding them,they are very hard to find.When you get the list you will see that the dealers listed only from 1 to 3 in stock,your going to have to call most of them to accumulate the six you need.I did it a year ago and luckily I got them.

 

Just what is it that you need,I'll be putting a new spoiler on in the next week,it was delivered today from Hawks,so I'll have the clips and the metal clips for the spoiler

Let me know.

 

I Needed The Metal Clips And The Two Bolts Were The Screws Enter They Were Rusted And The Screws Broke Inside The Bolts So I Need The Whole Spoiler Mounting Kit...I'm Restoring And Painting My OEM Spoiler

 

How are you going to get the broken studs out?

 

The Studs And The Bolts Are Rusted Together So They Might Break If I Force Them Out...I'll Try To Clean Them And Use Oil...Or Does Anyone Sell These?

 

I had that problem with this spoiler,I drilled out the piece of metal and I used a nut,I glued it in with weatherstripping adhesive and let it sit for a couple days and it worked out OK.

 

I'll Try That Good Idea But What About The Clips?...Check Out The Pics I Posted Of The Spoiler On My Album

 

The clips pull out, you can replace them if you find them.

 

Where Can I Find Them?Or Can I Do Something Else Like What You Did With The Glue And Nut...I Posted A Picture On My Album Of The Actual Car So That You Can See What Got Left On The Hatch Are Those Good Or Do I Replace Them Too?

 

You keep the ones on the hatch,don't remove them,you could damage the rear window.
Go to the "Spoiler Sale" thread,last page,82taRecaro posted a site you can get an idea from,it's something I did before I found clips.

 

How are you restoring and painting the black rubber OEM spoiler??? Thought there was nothing you can do with it??

 

do you put the clip in the spoiler or the window frame and at what direction do they face any pics would be great

 

From the service manual.... disregard first picture of pedestal tail.

I followed this procedure about 3 weeks ago when I put my OE rubber one back on and it worked fine.

Get a helper or two.

 

These directions are for the 85-86 TAs

 

If you need clips I have six new ones.

 

thanks for the information. the problem im having is i cant push the spoiler rearward to line up the bolt holes. i think the clips are catching on the window channel. is that little piece coming off the clip suppose to catch the window channel or be in it.
thanks rich24

 

The bottom of the clip is grooved so it would slid forward to lock it in the molding.That little piece is supposed to be kinda like a guide it holds the clip in place at the end of the molding.Set them up just like in the figure 62 that speedracer has.

 

i need help looking for 6 fastners . for rap around spoiler . i have all the metal clips that go on trim . thanks nyypridegta87

 

You'll have to go to your local GM Dealer and ask them to look up P/N 20556524 (that's the clips)and ask if he,she,would take the time and look up what dealer has any in stock,then your going to have to buy them from multiple dealers as that's what I had to do to get 6.These things are the hardest things to find,but their out there.I sold mine awhile ago.
These look just like them
http://www.clipsandfasteners.com/GM_...p_p/a19390.htm

 

Went there , only two dealer were showing them . Called , they didn't have them . Discontinued . Thanks 4 the reply.

 

For the few bucks that these cost http://www.clipsandfasteners.com/GM_...p_p/a19390.htm
I would give it a shot.

 

Cool , I'll look into them . Thanks

 

I bought mine from P.D.Q. Supply in NY aka autobodysupplies dot com

PN 89-6590 from Car-Pak which replaces 20556524. Look for clips & fasteners/domestic vehicle clips/click on car-pak catalog at the top/click on moulding clips/find part at the top left of page 170.

Whole box was cheap.

Good luck.

 

We found a short screw that has a head that slides right in. It fits nice and thigh .

 

That's what I did before I bought the clips, and it does work!!