How to loos weight?
Thread Starter
Senior Member
Joined: Mar 2002
Posts: 591
Likes: 0
From: portland, Maine USA
Car: grand prix/84 z28
Engine: 4.6 Northstar
Transmission: t-56
How to loos weight?
Hey,
I was wondering if anyone has seen replacement door panels or fends to loose some weight.
If you have any other ideas about loosing weight could you please post them.
Thank you very much =)
I was wondering if anyone has seen replacement door panels or fends to loose some weight.
If you have any other ideas about loosing weight could you please post them.
Thank you very much =)
Supreme Member

Joined: Jan 2000
Posts: 1,301
Likes: 1
From: Panama City Beach,Florida
Car: 1989 Camaro
Engine: 406
Transmission: Pro-built 700R4
Here are a few things to help ya lose some puonds.
Baer brakes up front 20lbs
Fiberglass hood 25lbs
Remove AC 35lbs
Lexan hatch 35 lbs
Aluminum water pump 8lbs
aluminum heads 50lbs
aluminum driveshaft 5lbs
remove spare and jack 35lbs
Plastic headlights 4lbs
remove emissions stuff 20lbs
smaller converter 10lbs
lightweight starter 10 lbs
There are a few other things you can do to loose weight off your car that I would not do on a car that was driven on the street. The under bumper impact beams are worth 50lbs and fiberglass doors are good for another 50.
Baer brakes up front 20lbs
Fiberglass hood 25lbs
Remove AC 35lbs
Lexan hatch 35 lbs
Aluminum water pump 8lbs
aluminum heads 50lbs
aluminum driveshaft 5lbs
remove spare and jack 35lbs
Plastic headlights 4lbs
remove emissions stuff 20lbs
smaller converter 10lbs
lightweight starter 10 lbs
There are a few other things you can do to loose weight off your car that I would not do on a car that was driven on the street. The under bumper impact beams are worth 50lbs and fiberglass doors are good for another 50.
Supreme Member
Joined: Aug 1999
Posts: 3,534
Likes: 0
From: Mililani, HI USofA Search Posts: 2848.............. Whore Posts: 47.................. Magical Whore Posts: 1
Car: 91 Camaro 77K
Engine: 3.1 Vslick
Originally posted by CrazyHawaiian
k1 evo kit will bring it down to 2800 pounds (full body fiberglass replacement) ... flame me now!!!!
k1 evo kit will bring it down to 2800 pounds (full body fiberglass replacement) ... flame me now!!!!
Trending Topics
Senior Member
Joined: Nov 2001
Posts: 704
Likes: 1
From: Panama City, FL
Car: 1999 Camaro Z28
Engine: 5.7
Transmission: 4L60E
Can anyone say ...... Jared!!!!! Subway diet. hehe. Fiberglass body panels, remove all seats except yours, take out window motors if you have em (and don't need em), remove all A/C, fiberglass hood, headlights, taillights, whatever you can take off the car and it still runs, lol.
lol yeah, thats why it is hard for some of the hevy chevys here that dont have the money to make nice mods to compete with stuff like the newer 4.6l gt mustangs because they dont weigh jack.... that sucks... but lose weight and stomp 'em better than you can now
Thread Starter
Senior Member
Joined: Mar 2002
Posts: 591
Likes: 0
From: portland, Maine USA
Car: grand prix/84 z28
Engine: 4.6 Northstar
Transmission: t-56
Just wanted to thank everyone
Hi,
Thanks everyone,
Umm... where can you get fiber glass body parts?
I have been looking on the web, and I found evo kits for almost every commpact but nothing with any real *****.
thanks again
Thanks everyone,
Umm... where can you get fiber glass body parts?
I have been looking on the web, and I found evo kits for almost every commpact but nothing with any real *****.
thanks again
well the only fiberglass parts for our cars that i have seen is Hood and front fenders. they all can be found at www.up22.com and the fenders are only 150 bucks which i dont think is bad at all
as for the rest of the weight loss its simple everthing you can live without ditch
seats
conlse
gauges the useless ones
wipers,washer bottle
over flow tank,(replace with pepsi bottle
)
brake booster
small gas tank
carpet
it all depends on what your using the car for if its just for street use i would just leave everthing in there but if its nothing but drag raceing well you can take out just about everthing.
as for the rest of the weight loss its simple everthing you can live without ditch
seats
conlse
gauges the useless ones
wipers,washer bottle
over flow tank,(replace with pepsi bottle
)brake booster
small gas tank
carpet
it all depends on what your using the car for if its just for street use i would just leave everthing in there but if its nothing but drag raceing well you can take out just about everthing.
oh and as for the K1 kit i wouldn't do it just to loose weight when you can weight less then that with out the price tag. dont get me wrong i love the K1 kit but i would only do it for pleasure not to loose weight.
P.S. CrazyHawaiian you have been flamed again
(i didn't think one was enough :sillylol: )
P.S. CrazyHawaiian you have been flamed again
(i didn't think one was enough :sillylol: )
the K1 kit takes alot of time and money the kit itself is cost right around $7,000 after S&H and you have to hack up your car and the interior kit is $750 without S&H but heres the site for you its bad *** just cost alot and you might wanna shot for the K2 kit its nicer and just a tich bit more. last i heard they were stopping the production of the K1 so they can sell the K2
http://www.k1-styling.sk/
http://www.k1-styling.sk/
Senior Member
Joined: Nov 2001
Posts: 704
Likes: 1
From: Panama City, FL
Car: 1999 Camaro Z28
Engine: 5.7
Transmission: 4L60E
Hey iroc, thanks alot. Here's a new pic of my car with my Iroc's polished. I just ordered my 91-92 Z28 High rise spoiler and clear side markers.

Oh, I've seen a complete fiberglass body online somewhere, but I forgot where. Complete one piece front end, rear 1/4's, everything. I'll start looking around.

Oh, I've seen a complete fiberglass body online somewhere, but I forgot where. Complete one piece front end, rear 1/4's, everything. I'll start looking around.
Senior Member
Joined: Nov 2001
Posts: 704
Likes: 1
From: Panama City, FL
Car: 1999 Camaro Z28
Engine: 5.7
Transmission: 4L60E
www.procarparts.com Cost me 39 bucks with shipping. Should be in later this week along with the spoiler. Thanks alot.
yeah i would have to say pour some slim fast in the gas tank. maybe drain all the fluids as in antifreeze, oil, tranny oil. take out all the brakes. let the heavy air out of the tires.
just start taking anything that you think shouldnt be in there. back seats spare tire. those will be the easy. if you have a "system" take it out. the AC....
just start taking anything that you think shouldnt be in there. back seats spare tire. those will be the easy. if you have a "system" take it out. the AC....
Senior Member
iTrader: (1)
Joined: Feb 2003
Posts: 908
Likes: 0
From: parishville NY upstate
Car: 86 IROC-Z
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.42s/posi/disc
i know
you can buy a complete fiberglass fron end for are cars threw JC whitney for like 5 or 600$
Supreme Member
iTrader: (1)
Joined: Sep 2002
Posts: 2,565
Likes: 10
From: Texas
Car: 1992 Formula Firebird
Engine: 305CID (LB9)
Transmission: World Class T5
Axle/Gears: 10-bolt, 4.10 gears
Save your money on saving weight. ADD MORE POWER!!!!
2002 LS1 Trans-AM=Heavier than our cars and still faster. (stock for stock)
More power= Well....................more power.
2002 LS1 Trans-AM=Heavier than our cars and still faster. (stock for stock)
More power= Well....................more power.
Originally posted by 87WS6
Save your money on saving weight. ADD MORE POWER!!!!
Save your money on saving weight. ADD MORE POWER!!!!
More power=More wheel spin, more parts broken and more money.
Jerry
Thread
Thread Starter
Forum
Replies
Last Post
Damon
Tech / General Engine
8
Sep 26, 2015 04:29 PM







