I want a 3rd gen!!
Thread Starter
Joined: Nov 2008
Posts: 143
Likes: 6
From: Wisconsin near the 54757
Car: 1986 Camaro Z28
Engine: 385" SBC
Transmission: built out 700r4
Axle/Gears: 4th gen, 373, LSD, GIRDLE
I want a 3rd gen!!
This is Ray and i'm looking for a 3rd gen Camaro/Firebird! I have some money to spend and want a fast car. Looking for very little rust, a v8, manuel trans, under 120,000 miles(will make exceptions). This car does not need to be a very collectible car by any means because i intend to make several body modifications.(hood, spoiler-no nubish wing either-,chin spoiler,foglamps,etc.)And engine mods, as well as handling/brake upgrades.
Will pay good! As part of the payment i'm in the possession of a '74 Dodge Challenger, it has good glass, some trim(was vinyl top) bumpers are pretty good, could use some reconditioning though. If you want parts off this car make me a offer and tell me what part! The reason i'm doing this is that the car is a structurally unsound, 318 auto car. (I know what your thing right now
)There is literally holes in the unibody frame, holes in the floorboards, and the previous owner(my uncle) parked it in a field because the tranny was going bad. When I got the car out of the field the bottom 2in of the radiator was submerged in mud. This was my previous dream car so now i'm much more apprehensive of buying cars.
Will pay good! As part of the payment i'm in the possession of a '74 Dodge Challenger, it has good glass, some trim(was vinyl top) bumpers are pretty good, could use some reconditioning though. If you want parts off this car make me a offer and tell me what part! The reason i'm doing this is that the car is a structurally unsound, 318 auto car. (I know what your thing right now
)There is literally holes in the unibody frame, holes in the floorboards, and the previous owner(my uncle) parked it in a field because the tranny was going bad. When I got the car out of the field the bottom 2in of the radiator was submerged in mud. This was my previous dream car so now i'm much more apprehensive of buying cars. Junior Member
Joined: Oct 2007
Posts: 96
Likes: 0
From: Astoria, N.Y.
Car: 1986 Z28 Camaro, 2002 Audi A4 (DD)
Engine: 350 .30 over w/bang for buck combo
Transmission: 700r4
Axle/Gears: stock for now
Re: I want a 3rd gen!!
I have an 86 Z28 Project car that the motor and tranny are solid but needs body work.. the car has a full autometer gauge cluster, i am looking for 3k but am negotiable i am in New York ...
Junior Member
Joined: Mar 2007
Posts: 13
Likes: 0
From: Florence Wi.
Car: 92 Z28
Engine: LB9 305
Transmission: T5
Axle/Gears: 3.42
Re: I want a 3rd gen!!
I have 92 Z28 T-tops TPI 5speed. Artic white, Brand new GM 305 crate motor, all new sensors, headers, exhaust, TA girdle, UMI LCA's, aluminum drive shaft, Poly bushings, new brakes all the way around, New tires, Brand New 3.42 gears. Nice leather int. some light scuffs and dings. Drive anywhere. Live in Florence Wis. Over 10,000. invested. Will take 7,800.00 for it. Also 77,000 org. miles on car.
Junior Member
Joined: Dec 2007
Posts: 13
Likes: 0
From: San Diego
Car: '91 Z-28 2007 F-250
Engine: 5.7
Transmission: 700R4
Axle/Gears: 4.10
Re: I want a 3rd gen!!
i have a 91 Z28 5.7L. It has a bad tranny but I'm only looking to get $2200.00. Located in San Diego.
Senior Member
Joined: Apr 2007
Posts: 261
Likes: 0
From: Terre Haute, IN
Car: 1991 RS Camaro
Engine: 350 0.060" over
Transmission: 700r4
Re: I want a 3rd gen!!
Black 91 RS
116,xxx miles
350 bored 0.060" (and holding up just great thank you), carb, headers, built and installed at 104,xxx (have receipts)
700r4, rebuilt at the same time, shift kit (not sure what brand), aluminum driveshaft, Borg Warner 3.23 posi rear.
Z28 rims
Glass T-tops (new seals, do not leak at all)
As for reliability, I drove it from Indiana to the far side of South Dakota and back a couple years ago stopping only for gas, and had no mechanical issues.
Some other stuff, PM me for more info/pictures.
$4500, somewhat negotiable.
116,xxx miles
350 bored 0.060" (and holding up just great thank you), carb, headers, built and installed at 104,xxx (have receipts)
700r4, rebuilt at the same time, shift kit (not sure what brand), aluminum driveshaft, Borg Warner 3.23 posi rear.
Z28 rims
Glass T-tops (new seals, do not leak at all)
As for reliability, I drove it from Indiana to the far side of South Dakota and back a couple years ago stopping only for gas, and had no mechanical issues.
Some other stuff, PM me for more info/pictures.
$4500, somewhat negotiable.
Last edited by jccaclimber; Dec 15, 2008 at 12:22 AM.
Junior Member
Joined: Nov 2007
Posts: 60
Likes: 0
From: Northern Indiana
Car: 1998 Camaro SS
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.23's
Re: I want a 3rd gen!!
I have a 1991 Z28 with the 305 TPI.
90,8XX Miles
T-tops
Automatic
3.73 Gears
Full Exhaust
Shift Kit
K&N Throttle Body Cone Filter
I might be forgetting something, PM me if interested.
Price is $6,500 (slightly negotiable)
90,8XX Miles
T-tops
Automatic
3.73 Gears
Full Exhaust
Shift Kit
K&N Throttle Body Cone Filter
I might be forgetting something, PM me if interested.
Price is $6,500 (slightly negotiable)
Re: I want a 3rd gen!!
I have an 1988 IROC Z-28 metalic blue with t-tops no leaks, 305 rebuilt at 100000, currently has 140000miles, manual transmission, shift kit, body and paint in good condition minor imperfections not noticable til up real close, interior in good condition. $4500 firm, if intested call jeromey at 425-418-1038
Last edited by lonefight; Jan 2, 2009 at 03:40 PM.
Trending Topics
Re: I want a 3rd gen!!
This is Ray and i'm looking for a 3rd gen Camaro/Firebird! I have some money to spend and want a fast car. Looking for very little rust, a v8, manuel trans, under 120,000 miles(will make exceptions). This car does not need to be a very collectible car by any means because i intend to make several body modifications.(hood, spoiler-no nubish wing either-,chin spoiler,foglamps,etc.)And engine mods, as well as handling/brake upgrades.
Senior Member
Joined: Apr 2007
Posts: 261
Likes: 0
From: Terre Haute, IN
Car: 1991 RS Camaro
Engine: 350 0.060" over
Transmission: 700r4
Re: I want a 3rd gen!!
Hey guys,
I just noticed, the OP had a couple vehicle wanted threads (You can see if you look at his other recent posts) but he seems to have hit a funding issue. He asked to close the other threads and seems to have forgotten about this one.
I just noticed, the OP had a couple vehicle wanted threads (You can see if you look at his other recent posts) but he seems to have hit a funding issue. He asked to close the other threads and seems to have forgotten about this one.
Last edited by jccaclimber; Jan 2, 2009 at 08:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post






