kick panel question
Thread Starter
Senior Member
Joined: Nov 2003
Posts: 953
Likes: 0
From: Waterloo, Iowa
Car: 1992 Camaro RS 25th Aniversarry Edition
Engine: 305
Transmission: TH-700-R4
Axle/Gears: 10 bolt with 3.23's and SLP Posi.
kick panel question
i have them in my hands and im wondering if any of ya know if these will fit in em:
http://www.crutchfield.com/cgi-bin/S...=0&cc=01&avf=N
no i wont be ordering from crutchfield but they offer the most info about products.
let me know if they will fit. if not im getting the RS5's
http://www.crutchfield.com/cgi-bin/S...=0&cc=01&avf=N
no i wont be ordering from crutchfield but they offer the most info about products.
let me know if they will fit. if not im getting the RS5's
Thread Starter
Senior Member
Joined: Nov 2003
Posts: 953
Likes: 0
From: Waterloo, Iowa
Car: 1992 Camaro RS 25th Aniversarry Edition
Engine: 305
Transmission: TH-700-R4
Axle/Gears: 10 bolt with 3.23's and SLP Posi.
im wondering if the Kicker Resolution RS6c's will fit in the Q-form kick panels. it says they will fit SOME 6.5 speakers. or should i go with 5.25 components up front and the 6.5 in back?
Member
Joined: Dec 2003
Posts: 230
Likes: 0
From: VA, USA
Car: '84 Camaro SC/ I-ROC Body Conversio
Engine: Rebuilt 350 5.7L, Edelbrock 750cfm
Transmission: Re-built 700-R4
Axle/Gears: Moser, 3.73
im wondering if the Kicker Resolution RS6c's will fit in the Q-form kick panels.
Thread Starter
Senior Member
Joined: Nov 2003
Posts: 953
Likes: 0
From: Waterloo, Iowa
Car: 1992 Camaro RS 25th Aniversarry Edition
Engine: 305
Transmission: TH-700-R4
Axle/Gears: 10 bolt with 3.23's and SLP Posi.
Originally posted by CbrasTsteLkChk
You mean the kick panels in your camaro?
You mean the kick panels in your camaro?
Member
Joined: Dec 2003
Posts: 230
Likes: 0
From: VA, USA
Car: '84 Camaro SC/ I-ROC Body Conversio
Engine: Rebuilt 350 5.7L, Edelbrock 750cfm
Transmission: Re-built 700-R4
Axle/Gears: Moser, 3.73
ooooooh... i gotcha, i was just confused about what panels you were talking about.
No put the 6 1/2 in... i mean if worse came to worse you could shave a little bit off.
No put the 6 1/2 in... i mean if worse came to worse you could shave a little bit off.
Trending Topics
Thread Starter
Senior Member
Joined: Nov 2003
Posts: 953
Likes: 0
From: Waterloo, Iowa
Car: 1992 Camaro RS 25th Aniversarry Edition
Engine: 305
Transmission: TH-700-R4
Axle/Gears: 10 bolt with 3.23's and SLP Posi.
there is a place ont he panels for em. im thinking im gonna have to go with the 5.25 just to be safe. plus then im not running the same size up front as i am in back.
Senior Member
Joined: Oct 2002
Posts: 530
Likes: 0
From: Nazareth, PA
Car: 87 GTA
Engine: L98
Transmission: 700R4
Get a 5.25 set. I am using an Orion set in my Q-form kicks and they fit nicely with some room to spare, but not enough for 6.5s. I think it even says in their instructions 6 would be the max you could fit in them.
Thread
Thread Starter
Forum
Replies
Last Post
IROCZDAVE (88-L98)
Interior Parts for Sale
4
Oct 6, 2016 09:08 AM




