I was looking around and have 2 options.

1. Was looking to order a sub box online for my 1989 camaro
or
2. I find a close member who could make me a box and i'll pay them.

I would honestly love to make one myself but I don't have the space or time available to be creating the box.

I honestly would love to find someone here as a member who could create one the way I'd like it, so then it would feel more appraisable to have.

If to help if someone does seem interested in taking the project i'll give you the specs i'm looking for.

I have x2 http://www.kenwoodusa.com/Car_Entert...fers/KFC-W2512

I was hoping for the typical subwoofer on each side on a flat surface and maybe the top pieces to have the full board over the whole well and top surface so there could be placement for the amp to be mounted. I have black interior carpet as well.

If someone would post or pm me if interested and how much that would be great. I was also hoping for a nice snug fit so no lose rattling or box moving around.

 

I could build you one like this for $250 shipped. If I made one with a top the cover the size of the hatch it would to expensive to ship.

Fit's tight and snug

Can do it in a weekend and have it shipped that Monday.

If interested you would need to do this in the next few weeks because I'm starting back College to work on another degree for summer I......then I will have no time available

 

if u ever make it to ND i have one laying around :P...... can u even ship these? if so by who there heavy and huge

 

You can ship them fedex, I did a calculator cost and it was around $40-45 to ship. They aren't that much bigger/heavier than the prefab boxes.

 

May i ask if I could have it any cheaper? I wish you lived closer i would love to come by and picture it up, but just checking on your pricing. I was expecting 140-150 shipped but i'll see how my next paycheck goes and hopefully have enough if you can't go any lower than 250. I honestly like it just its out of price range currently in my pay.

 

I wish I could, but that's what it would take for me to give up a weekend to build one. There are a lot of angles and cuts in that box to get it all together..def not a simple square box. It's not hard, just time consuming.

Either way it's cheaper than the local audio shop for a "custom" box.

I'm not a business, but I've been building speaker boxes for 20 years as a hobby and have a full shop complete with routers and most importantly...a table saw. Not bragging on myself, but my quality exceeds that of any prefab box or something someone did in the driveway with a drill and a jigsaw. I sand and flush all the cuts and edges...it looks good inside and out.

There are a few other members on the site that may build it a little cheaper...I would do a search. There are plans too, if you want to tackle this yourself and save some money.

If I get too wrapped up in college (few weeks) and work I may not be able to do something like this again for a while.

Either way just let me know

 

let me look at my money on my next paycheck like i said. which will determine what i could spend and if i can. it'll be a couple more weeks though since i get paid bi-weekly.. :\

 

if there was enough need i could use a shop bot and make a run of boxes..... if enough people needed them...

 

price, experience & quality?

 

well the Shopbot will cut anything to about 1 thousandth of a tolerance so i figure that shouldn't be a problem... i would make them out of 3/4th inch MDF unless someone wants something specific.... Ive built a few boxes by hand b4 and they have all held up quite well... to my 12' kicker L5's

The shopbot would actually make stronger boxes because of the exact tolerances it can cut to

i could send out just cut peaces or the box built depending on whats needed may be a decent difference in price because of shipping size???

price im unsure because i haven't looked into what a sheet of MDF is running lately (its usually pretty cheep) and i dont know what shipping would be.....

however if i could make over 5 boxes i probably could build them alot cheaper then other people because i wouldn't have as much time invested

 

the biggest sheet home depot sells which is pretty big from what i've saw which is like 96" x 46", roughly i didn't really get the exact numbers it might be like 1**" x 4*-6*" honestly but was only $46-56..

 

ya MDF wood isnt all that expensive although it cannot see water (soaks it up like a sponge)

 

I understand that. but like i said all i'm looking for is something that to fit snug and will hold 2 10" subwoofers and a place to mount an amp, along with having the fitted spots to have my power cables to go to, also to be carpeted black camaro fabric that is used. so it matches.

 

Electric fuel pumps are cheap to buy too....but go pay a mechanic to install it. Suddenly that $40 fuel pump turned into a $300 job.

 

i completely understand that, sorry to inform you but i wont be able to afford box by dead line, i had to pay for upcoming bills and money wont be decent enough for another month or so... sorry :\

 

It's all good, I find it funny when I quote a price to build a enclosure and someone starts saying how much wood costs.

I build custom jumpseat boxes for S10's in the past, here's some of my work:

 

To give you an example of people who thought they could do it themselves cheaper and save some money











But if your still looking for a box when your ready, let me know and I'll be glad to build it for you.

 

thanks, just right now i have a couple things i need, a posi rear with 3.42 and then the sub box and a paint job, so i'm trying to see what i can get, but i am most likely going have you do the box.