Z28ricer

iTrader: (2)

Anyone still making them, or did they go completely out of production ?

1ADan

iTrader: (4)

unfortunately, they aren't being made anymore to my knowledge. I'm in need of a set 2 since I swapped to a 4th gen dash, hopefully someone will pick up the torch.

the qlogic qforms aren't bad with some reinforcement, but their regular price is high for what you get out of the box

Z28ricer

iTrader: (2)

I was just wondering cause i've had my set posted fs for a while in the interior fs forum, and nobody seems to be looking for them, or dont know what they're looking at.

Figured maybe they were still avail and my price was higher than they are avail for, haha.

The Project

iTrader: (6)

Just be aware that the qforms tend to stick out and prevent you from extending your left leg.

It's even worse if you have a 5speed.

Best to get a set of custom made kick panel pods.

Z28ricer

iTrader: (2)

The ones im talking about, were "custom" that were being mass produced, they have plenty of foot room even if you are manual, thus me not seeing why nobody has bought em yet.

6SIX6

iTrader: (35)

Never knew they had these out till now. Anywhere you can find them at all??

1ADan

iTrader: (4)

didn't see these for sale, must have missed em. i guess i gotta see what the next paycheck looks like

The Project

iTrader: (6)

Here is there website.

http://www.qlogicenclosures.com/

They cost around $300 for the pair.

IMO take a spare set of kick panels to a stereo shop and spend $200-300 for a custom set of kicks that will give you more room.

OR...try to make a set for yourself with MDF and fibreglass. Worst case is you ruin a spare set of kicks. There are some good guys over on www.canadiancaraudio.com who can help.

Maybe a trip to Selective on Millcreek to see what Davis has to say. He knows his stuff and is reasonable priced.

http://www.selectivesound.net/about.html

Here is a shot of the qforms in my car when I was competing.

Z28ricer

iTrader: (2)

That was the point of what i'm talking about, the ones im referring to, are better than even having some pods added to stock kicks, they're 1 piece direct replacements for the stockers, fiberglass, and were being produced for regular sale, around 180$ way back when.

It would be nice if someone that was good with fiberglass bought em, made a new mould, and started producing them again, I'm guessing the last guy with the moulds disappeared.

Pics of my set:

drknow90rs_ss@y

iTrader: (3)

This would be great for me if my b4c IROC didnt have manual windows! LOL, just have to go the Kick panel route!

The Project

iTrader: (6)

TO make the mids fit in the door I had to cut some metal out. The door buildout is only 2.5" wide where the speaker fits in. I can fit up toe a 3" deep mid but the speaker will be flush with the buildout.

Also, to save weight on the door, the vinyl part of the buildout (where the bowtie is attached), is made from balsa wood (very light and easy to mold).

I would still go with custom kick panels as foot space in our cars are at a premium.

drknow90rs_ss@y

iTrader: (3)

Havent made up my mind yet what I am going to do with that yet... I just know the factory location in the dash is terrible! I've even toyed with the thought of converting to power windows and installing 4thgen door panels.

The Project

iTrader: (6)

Mid in the kick and the tweet molded into the A-pillars playing either on or off axis.

drknow90rs_ss@y

iTrader: (3)

That would be optimum!

87 WHITE GTA

I have a pair of the Qlogic ones if anybody is interested...$115 shipped...deadened in the back..can send pics....