New sub design (change of plans YET AGAIN!)
Thread Starter
Senior Member
Joined: Jan 2000
Posts: 528
Likes: 0
From: Ft. Lauderdale, FL
New sub design (change of plans YET AGAIN!)
One of these days I'll come up with a design that I'll actually think about finishing...
The plan is now for a set of IDMax10's that don't exactly exist yet, so I had to use some wood mockup's...
8 1/8" deep mounting depth is ridiculous for a 10 but they seem to just barely fit...
The rectangle opening that is going off into the spare tire area will be a channel to another box to get the required airspace that I need. The old round hole cut in the trim panel was from an old design...just need to replace the spare cover...no biggie.
------------------
Carl
CarAudio Resources
CarAudio Resources Forums are now ONLINE!
The plan is now for a set of IDMax10's that don't exactly exist yet, so I had to use some wood mockup's...
8 1/8" deep mounting depth is ridiculous for a 10 but they seem to just barely fit...
The rectangle opening that is going off into the spare tire area will be a channel to another box to get the required airspace that I need. The old round hole cut in the trim panel was from an old design...just need to replace the spare cover...no biggie.
------------------
Carl
CarAudio Resources
CarAudio Resources Forums are now ONLINE!
Senior Member
Joined: Jul 2000
Posts: 530
Likes: 0
From: Hanover PA
I know all about building for subs that don't exist yet. Check out my JL12W7 !
Looking good Carl! I really hope to see this thing in March!
mike
------------------
custom 3rd gen kickpanels at
http://www.djsexay.com
Looking good Carl! I really hope to see this thing in March!
mike
------------------
custom 3rd gen kickpanels at
http://www.djsexay.com
Supreme Member
iTrader: (1)
Joined: Oct 2001
Posts: 1,056
Likes: 0
From: decatur IL
Car: 86 iroc, 87 iroc, 89 iroc, 89 formula, 84 supra, 85 trans am
Engine: t\a motor 355 lt1 intake, t56,the works, 89 roc 427 sbc tt project
Transmission: to many to list
Axle/Gears: 9bolt 4:10 in the T/A
why not the new 13.5 w7?
Thread Starter
Senior Member
Joined: Jan 2000
Posts: 528
Likes: 0
From: Ft. Lauderdale, FL
If you're asking me why not the JL? Because I'm a diehard Image Dynamics competitor. The only thing non-image in the car will be the deck and amps. Processor will be the IDOne when it's released and all drivers.
If you're asking DJ, dunno
If you're asking DJ, dunno
Trending Topics
Senior Member
Joined: Jul 2000
Posts: 530
Likes: 0
From: Hanover PA
Originally posted by @ZZKKER
why not the new 13.5 w7?
why not the new 13.5 w7?
mike
Thread
Thread Starter
Forum
Replies
Last Post