A LOT of VERT parts 4 sale
Thread Starter
Supreme Member
Joined: Nov 2004
Posts: 1,196
Likes: 6
From: Illinois
Car: '91 Z28 & '90 RS Vert & '89 RS
Engine: 5.7L & none & 2.8L (soon to be LSX)
Transmission: yes
Axle/Gears: One's with teeeeefs
A LOT of VERT parts 4 sale
I am just gauging interest from everyone to see who would possibly be interested in buying A LOT of vert related parts. I have been collecting anything vert related for, oh, about 2 years now because I have been planning on building up this AWESOME vert, but I have come across one that I might just buy outright and I have all of these extra parts laying around.
If it is alright with Lon and Willie, I would like to see what everyone is needing. I am not trying to sell any of it yet, as I don't yet have this new car in my garage, but I do have a lot of stuff and would like to get a head start on sifting thru it all....
I honestly would like to sell it as a collection, but obviously will break it up and ship it all out seperatly...
What is everyone needing? Please post it up here as opposed to sending PMs so that I can keep it all straight. If all goes well, then I will post up a list of all that I have and take any offers.
If it is alright with Lon and Willie, I would like to see what everyone is needing. I am not trying to sell any of it yet, as I don't yet have this new car in my garage, but I do have a lot of stuff and would like to get a head start on sifting thru it all....
I honestly would like to sell it as a collection, but obviously will break it up and ship it all out seperatly...
What is everyone needing? Please post it up here as opposed to sending PMs so that I can keep it all straight. If all goes well, then I will post up a list of all that I have and take any offers.
Last edited by 911rsq; Dec 5, 2005 at 01:33 AM.
Supreme Member

Joined: Mar 2000
Posts: 1,160
Likes: 1
From: Lexington, SC
Car: 1992 Z/28, 2000 SS, 1968 RS/SS
Engine: 355 Built a bit / LS1
Transmission: T-5 / A4
Axle/Gears: 4.10 / 2/73's
alright, i need the plastic piece that goes across the top of the front windshield. U know the long piece that sits underneath the sun visors.. 
THanks.
-steve

THanks.
-steve
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
i need lots of weatherstripping. mostly around the windows and the piece that goes along the bottom of the cloth top, sitting between the top and the tonneu cover
Joined: Dec 1999
Posts: 5,964
Likes: 37
From: Hacienda Heights, CA
Car: 90 RS 'Vert, 88 IROC-Z, 88 Firebird
Engine: 305 ci tbi, 305 ci tpi, 350 ci tpi
Transmission: WC-T5, WC-T5, 700R4
Axle/Gears: 3.45, 3.27, 3.27
911rsq, I invite you to get a list of the items you plan to sell together along with prices you'll be asking for them and post them for sale under the Classified section. The other option for you is to list tehm on eBay.
Lon
Lon
Thread Starter
Supreme Member
Joined: Nov 2004
Posts: 1,196
Likes: 6
From: Illinois
Car: '91 Z28 & '90 RS Vert & '89 RS
Engine: 5.7L & none & 2.8L (soon to be LSX)
Transmission: yes
Axle/Gears: One's with teeeeefs
Originally posted by Purple 92 SS
alright, i need the plastic piece that goes across the top of the front windshield. U know the long piece that sits underneath the sun visors..
alright, i need the plastic piece that goes across the top of the front windshield. U know the long piece that sits underneath the sun visors..
Originally posted by 89irocrochester
I also need the No. 1 bow garnish molding which is the piece that runs along the front of the convertible top just under the latches.
I also need the No. 1 bow garnish molding which is the piece that runs along the front of the convertible top just under the latches.
Originally posted by Purple 92 SS
um i believe we're askin for the same thing
um i believe we're askin for the same thing
Lon, I will get a list together and I will post it up in the classifieds and will have it for sale in my Ebay store with buy it now prices, if that's cool....
Trending Topics
Thread Starter
Supreme Member
Joined: Nov 2004
Posts: 1,196
Likes: 6
From: Illinois
Car: '91 Z28 & '90 RS Vert & '89 RS
Engine: 5.7L & none & 2.8L (soon to be LSX)
Transmission: yes
Axle/Gears: One's with teeeeefs
Originally posted by BlueZee28
i need lots of weatherstripping. mostly around the windows and the piece that goes along the bottom of the cloth top, sitting between the top and the tonneu cover
i need lots of weatherstripping. mostly around the windows and the piece that goes along the bottom of the cloth top, sitting between the top and the tonneu cover
Thread Starter
Supreme Member
Joined: Nov 2004
Posts: 1,196
Likes: 6
From: Illinois
Car: '91 Z28 & '90 RS Vert & '89 RS
Engine: 5.7L & none & 2.8L (soon to be LSX)
Transmission: yes
Axle/Gears: One's with teeeeefs
Originally posted by 92transam16
i need that black plastic thing that goes around the latches.... Mines cracked..
i need that black plastic thing that goes around the latches.... Mines cracked..
Member
Joined: Mar 2004
Posts: 406
Likes: 0
From: Holland, MI
Car: '89 Black IROC 'vert
Engine: 305 TPI
Transmission: 700-R4
Axle/Gears: 2.73 posi
I need the pin and bracket from the underside of the tonneau that the cable/handle attach to, as well as the drivers side upper seatbelt trim piece. That should just about do it for necesary 'vert specific pieces.
Oh yeah, I need the J (or L) shaped plastic trim pieces that run along the back of the door jamb in black preferrably, but would take grey as well.
Oh yeah, I need the J (or L) shaped plastic trim pieces that run along the back of the door jamb in black preferrably, but would take grey as well.
Joined: Sep 2001
Posts: 634
Likes: 6
From: Richmond Hill, GA
Car: They all sit.
Engine: LS1, LB9, LB9, L98, LT1, LT4, LT4
Transmission: A4, T5, T5, A4, A4, T56, TR6060
I need the top pass side strip. is one of the longer pieces, about the same size as the t-top weather strip. I can send you a pic of what it looks like.
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Originally posted by 911rsq
I have 4-5 pieces of loose weatherstripping. I honestly don't know where they go, as I don't have a functional vert yet. I will look at the tops I have and see what's on them.
I have 4-5 pieces of loose weatherstripping. I honestly don't know where they go, as I don't have a functional vert yet. I will look at the tops I have and see what's on them.
just take a few pictures of the pieces you have, and i'll probably be able to tell you if it's what i need...
Supreme Member
iTrader: (2)
Joined: Nov 2000
Posts: 1,295
Likes: 0
From: California
Car: 1988 Camaro Convertible
Engine: 355
Transmission: 700r4
Well, not to step on anyones toes
But I am looking for EVERYTHING as I am doing a ground up resto... So I am willing to buy just about everything in one shot instead of you having to piece mail it all. The only thing I really dont need is a tonneau cover as I have three already, however I do need the latches underneath so I will take the tonneau as well. I can use the sail panels (I am building custom ones and I want to hack mine but have backups) Also can use the trunk lid and other pieces.
To everyone else I will be developing new sail panels to allow for easy fit of 6x9's without using spacers and having it look natural... Pics after I start hacking...
But I am looking for EVERYTHING as I am doing a ground up resto... So I am willing to buy just about everything in one shot instead of you having to piece mail it all. The only thing I really dont need is a tonneau cover as I have three already, however I do need the latches underneath so I will take the tonneau as well. I can use the sail panels (I am building custom ones and I want to hack mine but have backups) Also can use the trunk lid and other pieces.To everyone else I will be developing new sail panels to allow for easy fit of 6x9's without using spacers and having it look natural... Pics after I start hacking...
Thread Starter
Supreme Member
Joined: Nov 2004
Posts: 1,196
Likes: 6
From: Illinois
Car: '91 Z28 & '90 RS Vert & '89 RS
Engine: 5.7L & none & 2.8L (soon to be LSX)
Transmission: yes
Axle/Gears: One's with teeeeefs
Here's just a short list of what I have......
2 Trunk lids
3 sets of rear side panels (sail panels)
1 tonneau cover
1 vert top frame with headliner (1991)
2 upper windshield plastic trim
2 front of top plastic trim
misc weatherstripping
both left and right side spoiler pieces
several tonneau release electric switches
1 NOS top release cable and handle
1 set of NOS black vert front seat belts
2 sets of tonneau striker pins (piece bolted to tonneau that clips into the latch)
1 set vert ground effects (1990 style)
1 1990 vert body (body only, including all vert specific sheet metal.....no title)
2 sets of the seatbelt trim that go just above door jam that the top sits in when it is up.
1 NOS pair of rear seatbelt trim (screws into tonneau where belt goes thru)
1 NOS pair of front seat seatbelt retainers (vert specific)
1 Brand New reproduction trunk weather stripping (vert specific)
2 pair rear side panel arm rest pads
2 sets of vert top latch plates (bolt onto top of windshield for top to latch to. I have both styles, I think)
1 NOS pair of rear side panel speaker covers (black)
1 reproduction 86-92 GM convertible top manual
2 sets of tonneau hinge tensioners
several misc interior braces and brackets
I have more, but this is just what came to mind while sitting here going thru it in my head.......
Like I said, I am not selling yet and you guys will be the FIRST to know when I do !!!!!
2 Trunk lids
3 sets of rear side panels (sail panels)
1 tonneau cover
1 vert top frame with headliner (1991)
2 upper windshield plastic trim
2 front of top plastic trim
misc weatherstripping
both left and right side spoiler pieces
several tonneau release electric switches
1 NOS top release cable and handle
1 set of NOS black vert front seat belts
2 sets of tonneau striker pins (piece bolted to tonneau that clips into the latch)
1 set vert ground effects (1990 style)
1 1990 vert body (body only, including all vert specific sheet metal.....no title)
2 sets of the seatbelt trim that go just above door jam that the top sits in when it is up.
1 NOS pair of rear seatbelt trim (screws into tonneau where belt goes thru)
1 NOS pair of front seat seatbelt retainers (vert specific)
1 Brand New reproduction trunk weather stripping (vert specific)
2 pair rear side panel arm rest pads
2 sets of vert top latch plates (bolt onto top of windshield for top to latch to. I have both styles, I think)
1 NOS pair of rear side panel speaker covers (black)
1 reproduction 86-92 GM convertible top manual
2 sets of tonneau hinge tensioners
several misc interior braces and brackets
I have more, but this is just what came to mind while sitting here going thru it in my head.......
Like I said, I am not selling yet and you guys will be the FIRST to know when I do !!!!!
Last edited by 911rsq; Dec 7, 2005 at 01:54 AM.
Member
Joined: Mar 2004
Posts: 406
Likes: 0
From: Holland, MI
Car: '89 Black IROC 'vert
Engine: 305 TPI
Transmission: 700-R4
Axle/Gears: 2.73 posi
Aw, come on! Dont tease us! Calling dibs on (if you decide to sell):
1 set of tonneau striker pins (piece bolted to tonneau that clips into the latch) - as long as thats the pin and bracket that the cable attaches to, so that my cable/handle actually pull on something to release the bow #5, or hold it down. Whatever way you want to look at it.
&
1 set of NOS black vert front seat belts
&
1 NOS pair of front seat seatbelt retainers (vert specific)
&
1 set of the seatbelt trim that go just above door jam that the top sits in when it is up.
Yeah, that should do it for now. Let me know if and when you decide. I've been looking for some of these parts for a while now. Also, depending on where you are in Illinois, I'd drive down same/next day to get them from you.
edit: Ha ha! Beaten!
\/ \/ \/
1 set of tonneau striker pins (piece bolted to tonneau that clips into the latch) - as long as thats the pin and bracket that the cable attaches to, so that my cable/handle actually pull on something to release the bow #5, or hold it down. Whatever way you want to look at it.
&
1 set of NOS black vert front seat belts
&
1 NOS pair of front seat seatbelt retainers (vert specific)
&
1 set of the seatbelt trim that go just above door jam that the top sits in when it is up.
Yeah, that should do it for now. Let me know if and when you decide. I've been looking for some of these parts for a while now. Also, depending on where you are in Illinois, I'd drive down same/next day to get them from you.
edit: Ha ha! Beaten!
\/ \/ \/
Last edited by DJCobol; Dec 7, 2005 at 03:12 PM.
Senior Member
Joined: Sep 2002
Posts: 762
Likes: 1
From: Long Beach, CA
Engine: 305 TPI (LB9)
Transmission: WC T-5
I need the upper windshield plastic trim piece (like everybody and their mother does!) for a 1990, as well as a tonneau release switch (the one that sits in the console between the power window switches), also for a 1990 - yellow graphics. PM me with prices, cash in hand.
Member
iTrader: (4)
Joined: Sep 2004
Posts: 413
Likes: 0
From: Sherman Oaks, CA
Car: 2011 BMW X5 35d (diesel)
Engine: 3.5 ltr twin turbo diesel, 425lb/ft
Transmission: 6 speed auto
Axle/Gears: All wheel drive
Just tell us when you decide to sell this stuff - it's annoying to see parts I can't buy...
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Originally posted by '87 IROC VERT
Just tell us when you decide to sell this stuff - it's annoying to see parts I can't buy...
Just tell us when you decide to sell this stuff - it's annoying to see parts I can't buy...
Thread Starter
Supreme Member
Joined: Nov 2004
Posts: 1,196
Likes: 6
From: Illinois
Car: '91 Z28 & '90 RS Vert & '89 RS
Engine: 5.7L & none & 2.8L (soon to be LSX)
Transmission: yes
Axle/Gears: One's with teeeeefs
Originally posted by '87 IROC VERT
Just tell us when you decide to sell this stuff - it's annoying to see parts I can't buy...
Just tell us when you decide to sell this stuff - it's annoying to see parts I can't buy...
The vert I was looking out dropped out on me so I will probably still have to build mine up. I am gonna go thru all your threads tomorrow and get back to those that posted....
I realized there is A LOT that I forgot I had, so I do have more and duplicates of some of it. Like I said, I will get back to ya soon. I shoulda just kept my mouth shut until I had the new car, but got giddy...
Joined: Dec 1999
Posts: 5,964
Likes: 37
From: Hacienda Heights, CA
Car: 90 RS 'Vert, 88 IROC-Z, 88 Firebird
Engine: 305 ci tbi, 305 ci tpi, 350 ci tpi
Transmission: WC-T5, WC-T5, 700R4
Axle/Gears: 3.45, 3.27, 3.27
Since the original intent of the thread is gone I'll close the thread. You can contact the individual Members that posted a need.
Lon
Lon
Thread
Thread Starter
Forum
Replies
Last Post







