XDF file for 3.1 V6 and bin
06-05-2005, 05:47 AM
#1
Member
Thread Starter
XDF file for 3.1 V6 and bin
i tried a search but i can't find a XDF file for tunerpro for a 3.1 V6 in my 91 RS. I'm also unsure as to whether the .bin that i got is correct (AZTX) from efitune. i know the car uses the 730 ecm, and i have the right datastream .ads file from the tunerpro website for the RT version. Does anyone have the right XDF, or can you verify that i have the right BCC?
06-05-2005, 09:14 PM
#3
Member
Thread Starter
the 730.ecu file that i have is for the V-8's tho, the $8D mask. I tried using that via the import option, but it doesn't work with the V-6 bin. The values are all waaay off. where can i get the correct .ecu file for the V-6? $A1 according to one of the posts that turned up in a search.
06-07-2005, 06:55 AM
#5
Member
Thread Starter
thnks for the link. I d/l A1.zip, but it contains two files labled 727_730_A1.doc and ARUR_A1.txt. am i supposed to change one of the file extentions to .ecu?
Last edited by 1320 Right Ln.; 06-07-2005 at 06:57 AM.
06-07-2005, 07:15 AM
#6
Moderator
iTrader: (1)
Join Date: Mar 2002
Location: Chasing Electrons
Posts: 18,401
Likes: 0
Received 215 Likes
on
201 Posts
Car: check
Engine: check
Transmission: check
The maskid in your 3.1 is $88. The AZTX bin _may_ have been superseded with AZTY (auto car?). AZTY is the latest and greatest bin from GM. The ECU file for it will be ATTA???(something). Can find that and a hac for $88 over on diy-efi.org.
At a minimum I would start with a stock bin and tune/change from there.
RBob.
At a minimum I would start with a stock bin and tune/change from there.
RBob.
Trending Topics
06-07-2005, 08:25 PM
#8
TGO Supporter
Join Date: Jan 2000
Location: In your ear. No, the other one.
Posts: 1,861
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Trans Am WS6
Engine: 350 TPI
Transmission: T5WC
Axle/Gears: 3.08 posi
Originally posted by RBob
Can find that and a hac for $88 over on diy-efi.org.
Can find that and a hac for $88 over on diy-efi.org.
06-07-2005, 08:55 PM
#9
Member
Thread Starter
it's called 730_atta.ecu in the uploads folder. I think that's where i eventually found it. It's rather incomplete however, as there are several "mystery" tables, and the units for some values are skewed. The important big stuff tho, spark and VE are there.
06-08-2005, 07:31 AM
#10
Moderator
iTrader: (1)
Join Date: Mar 2002
Location: Chasing Electrons
Posts: 18,401
Likes: 0
Received 215 Likes
on
201 Posts
Car: check
Engine: check
Transmission: check
Originally posted by Mangus
RBob - do you have a filename for the hac? I can't seem to find it in the uploads or incoming folders.
RBob - do you have a filename for the hac? I can't seem to find it in the uploads or incoming folders.
RBob.
06-08-2005, 11:19 AM
#11
TGO Supporter
Join Date: Jan 2000
Location: In your ear. No, the other one.
Posts: 1,861
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Trans Am WS6
Engine: 350 TPI
Transmission: T5WC
Axle/Gears: 3.08 posi
Originally posted by RBob
Check under ECMs, 1227730. I believe it is there as AZTY.DSM
RBob.
Check under ECMs, 1227730. I believe it is there as AZTY.DSM
RBob.
Thread
Thread Starter
Forum
Replies
Last Post
Steves ZZ5
DIY PROM
6
05-15-2001 12:45 PM
