I screwed up. Need help
Thread Starter
Junior Member
Joined: Jul 2002
Posts: 44
Likes: 0
From: Pensacola, FL
Car: 87 GTA
Engine: 350
I screwed up. Need help
Yesterday I was takeing off my door of my firebird so i could replace the pin. Well i disconected the PL, PW, and PM. I got the door off and replaced it and put it back on and connected everything. All my power accesories work but the power door locks. They won't work on the passengers side either, which i didn't touch. I'm very confused and if you can help me, i would be very greatfull. THanks
Thread Starter
Junior Member
Joined: Jul 2002
Posts: 44
Likes: 0
From: Pensacola, FL
Car: 87 GTA
Engine: 350
Yeah, thats what i thought, that it was the fuse. But i checked and they all seemed fine. Oh and i did check the horn, and it did work. Thanks for the suggestion.
Thread Starter
Junior Member
Joined: Jul 2002
Posts: 44
Likes: 0
From: Pensacola, FL
Car: 87 GTA
Engine: 350
I heard that there is a relay to both of the switches. If there is, where is it located. Maybe i need to replace it, because when i push the button nothing happens, not a click or anything so it must not be getting power. What do you think?
Thread Starter
Junior Member
Joined: Jul 2002
Posts: 44
Likes: 0
From: Pensacola, FL
Car: 87 GTA
Engine: 350
Ok i found the relay. I figured out it didn't work because it had no ground because i never skrewed it back to the frame.
Them ground will get you. Now the locks work. Thanks for everyones posts.
Them ground will get you. Now the locks work. Thanks for everyones posts.Thread
Thread Starter
Forum
Replies
Last Post
gta892000
Cooling
6
Sep 16, 2015 12:37 AM




