Im doing the gold old hot start cure fix. However I got the power wires hooked. But im having trouble with the ignition & etc wires. There all orange and have no clue how to hook them up. PLease Help ME

 

Do you have a pic of the wires that you don't know what to do with?

 

i think the ignition switch and ignition safety switch crimped together. that leaves the igntion coil wire left..

 

Here's the pic from the tech section. The only thing is my starter selenoid that is on the starter has two post. But all wires were hooked to one. I also had a negative wire hooked to the selenoid from the starter. Do i still need that shortout plate??? PLease im going to finish this tomorrow.

 

You should have a large cable from the battery going to the post marked "B" along with two or three smaller red wires that are fusible links. There is a post below the one marked "B" that has a lead going to the starter itself. There is not a wire or any thing else going from that post marked "I" to the post marked "B". There is a small purple wire going from the "park/neutral" switch (automatic) or "clutch safety" switch (manual) to the post marked "I".

 

i got three wires which are fused, there all orange. So let me get this right

1. is a black wire from selenoid to starter
2.has no wires hooked to it
3. all wires includind power wire hooked to it

Sound right

 

please explain what you mean with the 1,2,3 you have in your post.

 

my buddy got me straight Thanks any how

 

SUCCESS!!!! Got it all wired and drove it and restarted everytime!!!