centerbolt valvecovers
01-17-2008, 03:13 PM
#1
Supreme Member
Thread Starter
iTrader: (7)
Join Date: Aug 2005
Location: Ohio, near columbus
Posts: 1,068
Likes: 0
Received 1 Like
on
1 Post
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
centerbolt valvecovers
they are gm performance parts covers dad bought them 4 me last chrismas, they were ran for a few months then the car was totaled.
The breathers and pcv cover are spectre, the valve is new, the oil cap is mr gasket and i painted it as close red as i could find to match the red on the covers.
The gaskets are felpro and pretty much new i rtved them in for ease of install, they will seal perfectly fine and are still very soft.
the covers cost 130$ new without the breathers, oil fill cap and gaskets i want 130$ shipped for everything, i won't seperate it thanks.
The breathers and pcv cover are spectre, the valve is new, the oil cap is mr gasket and i painted it as close red as i could find to match the red on the covers.
The gaskets are felpro and pretty much new i rtved them in for ease of install, they will seal perfectly fine and are still very soft.
the covers cost 130$ new without the breathers, oil fill cap and gaskets i want 130$ shipped for everything, i won't seperate it thanks.
Last edited by flaming-ford; 01-17-2008 at 03:17 PM.
01-17-2008, 04:51 PM
#2
Member
iTrader: (1)
Join Date: Sep 2007
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Engine: 350 4 boltmain goodwrench crate
Transmission: 350 turbo 3 speed
Axle/Gears: i belive its a 323 gear ratio posi
Re: centerbolt valvecovers
hi ,, would you consider tradeing for any of the parts your looking for ?
01-17-2008, 06:38 PM
#3
Supreme Member
Thread Starter
iTrader: (7)
Join Date: Aug 2005
Location: Ohio, near columbus
Posts: 1,068
Likes: 0
Received 1 Like
on
1 Post
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
Re: centerbolt valvecovers
most definetly, would also love to trade them outright for a set of real nice side bolts actually (am changing to older styled head).
either way i'm not currently using them and need most of everything in my iso still, so let me know
either way i'm not currently using them and need most of everything in my iso still, so let me know
01-17-2008, 08:52 PM
#4
Member
iTrader: (1)
Join Date: Sep 2007
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Engine: 350 4 boltmain goodwrench crate
Transmission: 350 turbo 3 speed
Axle/Gears: i belive its a 323 gear ratio posi
Re: centerbolt valvecovers
cool ,, shoot me a pm with what all you would consider for a trade , or i can get you a never used set of chrome side bolt valve covers for a straight out trade ,, let me know
01-18-2008, 05:16 PM
#6
Supreme Member
Thread Starter
iTrader: (7)
Join Date: Aug 2005
Location: Ohio, near columbus
Posts: 1,068
Likes: 0
Received 1 Like
on
1 Post
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
Re: centerbolt valvecovers
so shiny you know you want them lol.
also would be seriously interested in any of the parts in my sig and or the biggest thing a stright up trade for a nice set of polished aluminum valve covers that come in a side bolt design
also would be seriously interested in any of the parts in my sig and or the biggest thing a stright up trade for a nice set of polished aluminum valve covers that come in a side bolt design
01-18-2008, 11:56 PM
#7
Supreme Member
iTrader: (25)
Join Date: Jul 2004
Location: Beautiful BC
Posts: 2,623
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 IROC-Z / '91 Z28 / '91 GTA
Engine: LT4 Hot Cam 305 / L98 355 / MR 383
Transmission: 5-spd / 700R4 / 700R4
Axle/Gears: 3:45 / 3:23 / 3:23
Re: centerbolt valvecovers
hum.. I like those...
Trending Topics
01-20-2008, 08:23 PM
#8
Supreme Member
Thread Starter
iTrader: (7)
Join Date: Aug 2005
Location: Ohio, near columbus
Posts: 1,068
Likes: 0
Received 1 Like
on
1 Post
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
Re: centerbolt valvecovers
uppity
theres a pic of them on my deceased ride if it helps.
btw don't bash about the wires i soon after replaced them with msd red ones and the filter with a k&n lol i know it looked trashy but, u should have saw her when i bought her.....
theres a pic of them on my deceased ride if it helps.
btw don't bash about the wires i soon after replaced them with msd red ones and the filter with a k&n lol i know it looked trashy but, u should have saw her when i bought her.....
Last edited by flaming-ford; 01-21-2008 at 08:31 PM.
01-21-2008, 08:20 PM
#9
Supreme Member
Thread Starter
iTrader: (7)
Join Date: Aug 2005
Location: Ohio, near columbus
Posts: 1,068
Likes: 0
Received 1 Like
on
1 Post
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
Re: centerbolt valvecovers
sorry guys i redid all my photobucket albums heres the repost of the pics,
01-23-2008, 05:16 PM
#10
Supreme Member
Thread Starter
iTrader: (7)
Join Date: Aug 2005
Location: Ohio, near columbus
Posts: 1,068
Likes: 0
Received 1 Like
on
1 Post
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
Re: centerbolt valvecovers
price dropped to 120$ for everything, the oil fill cap matches much much better than the crappy picture shows btw, you'd have to c it in the light. up again
01-26-2008, 03:57 PM
#11
Supreme Member
Thread Starter
iTrader: (7)
Join Date: Aug 2005
Location: Ohio, near columbus
Posts: 1,068
Likes: 0
Received 1 Like
on
1 Post
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
Re: centerbolt valvecovers
110 shipped in the lower 48 up again cmon guys this is a hell of a deal price these parts out your looking at over 200$ and its all in almost new condition, couple scuffs but, nothing major whatsoever.
01-26-2008, 07:29 PM
#12
Supreme Member
iTrader: (25)
Join Date: Jul 2004
Location: Beautiful BC
Posts: 2,623
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 IROC-Z / '91 Z28 / '91 GTA
Engine: LT4 Hot Cam 305 / L98 355 / MR 383
Transmission: 5-spd / 700R4 / 700R4
Axle/Gears: 3:45 / 3:23 / 3:23
Re: centerbolt valvecovers
For the time being, I've decided to stay away from chrome/polished under the hood, else I would have boughten them already.
01-27-2008, 11:41 AM
#13
Supreme Member
Thread Starter
iTrader: (7)
Join Date: Aug 2005
Location: Ohio, near columbus
Posts: 1,068
Likes: 0
Received 1 Like
on
1 Post
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
Re: centerbolt valvecovers
dont blameya, i love how my old engine looked but, upkeep was a p.i.t.a. I just don't think chrome is going to look right on my tpi, considering i plan to polish the plenum and runners and have a painted base, suppose i should photoshop it to see as they are in nice condition but, i have a chrome set on it currently and it makes it look mismatched so i dunno......
up again guys don't be afraid to offer, would be willing to do straight up trades for some interior peices, includiong carpeting map lighted rear view mirror, ds grey kick panel, driverside husepanel, fusepanel cover and its associated fasteners, dash pad, headliner backing, speaker covers unwarped, black seat belts, ps (powered) mirror, 91-92 z28 hood blisters, 91-92 z28 hi rise wing, so on
up again guys don't be afraid to offer, would be willing to do straight up trades for some interior peices, includiong carpeting map lighted rear view mirror, ds grey kick panel, driverside husepanel, fusepanel cover and its associated fasteners, dash pad, headliner backing, speaker covers unwarped, black seat belts, ps (powered) mirror, 91-92 z28 hood blisters, 91-92 z28 hi rise wing, so on
Last edited by flaming-ford; 01-27-2008 at 11:57 AM.
02-03-2008, 06:34 PM
#15
Member
iTrader: (1)
Join Date: Sep 2007
Location: Alberta, Canada
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 GTA
Engine: 350 LT1
Transmission: 700r4
Axle/Gears: 3.70
Re: centerbolt valvecovers
Hi, the pictures are not showing up for me, could you post a link to them?
Thanks.
Thanks.
02-03-2008, 07:29 PM
#16
Supreme Member
Thread Starter
iTrader: (7)
Join Date: Aug 2005
Location: Ohio, near columbus
Posts: 1,068
Likes: 0
Received 1 Like
on
1 Post
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
Re: centerbolt valvecovers
----------
another pic
Last edited by flaming-ford; 02-03-2008 at 07:31 PM. Reason: Automerged Doublepost
02-05-2008, 09:45 AM
#18
Thread
Thread Starter
Forum
Replies
Last Post
sreZ28
Engine/Drivetrain/Suspension Parts for Sale
5
10-22-2015 08:21 AM
MoJoe
Engine/Drivetrain/Suspension Parts for Sale
11
09-24-2015 09:12 PM