i have a polished stealth ram complete with 48mm throttle body, stock lt1 24#per hour injectors made by rochestor, polished water neck, a fuel pressure gauge, and even the fittings and plugs for it...the setup is used and the AFPR was damaged during shipping before it got to me...i will include it bc someone might be able to fix it...i bought this intake for my GTA and now with my paint job needing more money and time running out before i move i have to sell it and wait till later to upgrade the motor...

NOTE: the throttle body did not clear the fuel rail when i tested it, from what ive read this is easy to fix...the TPS sensor is chipped but should be usable. The setup is a little dirty and has been used for an estimated 5-10,000 miles...it has some scratches but i think anyone who takes the time to repolish it a bit and clean it up will have it looking great with little effort...all hardware is included as seen in the pics

with a tad of TLC this will be a bad A$$ intake...i would like to get 700 + shipping

Dual Fan Setup: stopped working on my car...dont know why? could be my relays or could be the motors...neither fan will run on my car for some reason...someone hacked up the wiring before i bought it might be why...however i bought a replacement fan and dont need the dual setup anymore...CHEAP...$50 bucks takes them SHIPPED

i have a full set of ground effects for 82-92 Trans Ams in EXCELLENT condition...no tears, i think only one mounting stud was rusty/damaged...not a big deal by any means...painted black VERY NICE set $100 obo

 

MORE PICS

 

and more pics!!!

 

got dibs on fans. i'm outta town right now, but i can send you the money on thursday.

 

thatll work man
ill get them packed up soon

 

pm me your address and name so i can have a money order out to you on thursday!

does it come with the top and bottom mounting brackets?

 

ttt

 

new part added

 

new price on the HSR 600 + shipping ...its the lowest i can go on it...if no one jumps on it Ill just put it on ebay

figure out the prices on the parts and youll find it comes well over what im asking...its a good deal but i cant wait forever for someone...one more week on the boards

it costs 600 bucks just for the bare polished intake brand new

 

ttt

 

thx to all for taking the time too look...one last boost to the top

 

ttt

 

still have fans?

 

would you take 550.00 i live in san antonio.

 

WOULD YOU CONCIDER SELLING JUST THE INTAKE?

 

yes i still have the fans...im awaiting the opportunity to check if they work bc im going to be wiring a manual switch for my new fan and ill be able to test them...i found my fan switch sensor was not even completed so ill bet that and the fact i nv used my a/c the fans are in perfect working order...now on the intake pms sent

 

i have a hypertech fan switch 176 Degrees On/ 166 Degrees Off
i purchased from summit and ended up manually wiring up my fan

the switch goes for 42.XX plus shipped...id like 40 shipped for it

ill add a couple of more parts later tonight...all else is still for sale...the fans will be checkd but im almost 100% sure they are in perfect working order as i found my wiring to my fan switch completely GONE and a/c hasnt worked since i bought it...so the fans should be in working order but i will CHECK them

 

I'll buy the associated parts if you sell the manifold to lt1z350

 

well i didnt sell the intake at all
what parts do you need? i might split it up

 

well i didnt sell the intake at all
what parts do you need? i might split it up

 

i still have all the parts listed...the lowest ill go on the intake is $575 + shipping

i wont settle for less so no offers under that plz...i might consider splitting the setup it just depends on what you want and the offer you make

thx for looking
plz check my seller feedbacks if youd like they are all excellent

 

I need everything but the intake.

 

hardware associated with the intake is sold

HSR POLISHED INTAKE PLENUM AND BASE MANIFOLD: $425 SHIPPED
brand new = $600 + shipping

i also have a nice working wiper motor available for sale $30 Shipped

plz check the first paragraph for other items for sale

 

I am intrested in the intake but have two lt1 engines I am trying to sell right now to generate the cash. I will keep intouch. I could send you a down payment to hold it if you want but if not I understand. need anything to get you car running???? Or know anyone looking for lt1 stuff. get back to me if you want to make a commentment on it to me

 

How much for just the plenum?

 

for that i would cut the price and say 200 + shipping

i would much rather sell it as a set but if noone else makes a move on this within a week or so id be willing to split it up

 

ttt and i wanted to make a reminder
a hypertech fan switch
and wiper motor have been added to the list of items for sale

offers are welcome
thx

 

ttt

 

HSR POLISHED INTAKE PLENUM AND BASE MANIFOLD: $375 SHIPPED
brand new = $600 + shipping

i need this thing gone soon pm me for any details PICS above and parts were added scroll up to see

 

Did the fans sell? If not, dibs.

 

Hsr off the market guys, I just paid for it and it is on its way to a 383 that runs 11.50 with a stock tpi base and slp runners cant wait for the pick up. already made 390 @ the wheels. peaked at 5400 what a joke. I should see another useable 1000 rpms with that intake thanks to godspeedgta. cant wait

 

Fans are STILL AVAILABLE and ready to go...i still havent gotten a chance to test them but might soon...im almost certain they work just fine...it was just my car that was screwed all to hell and wouldnt work...let me know

as for the HSR it is all gone thx to the buyers again