transam360

iTrader: (-1)

ok I am selling my 850 dp that was just rebuilt about 2 weeks ago it is to big for my engine that is why i am selling it i need a 700 to 770 cfm carb holley edlbrooke dosent matter if you want to trade of i am selling it for 175.00 heres some pics

xpndbl3

iTrader: (5)

that one should work fine, you just need to learn how to tune it.

Camarothatcould

iTrader: (3)

Why does his bigger than mine carb have only two screws where as my 750 dp is '4 corner idle'

transam360

iTrader: (-1)

i have always wonderd that to if anyone knows i would like to know to

xpndbl3

iTrader: (5)

some carbs that are older are 2 corner idle instead of 4 corner. The 4 corner one just has a little bit better adjustability on a larger cam.

Camarothatcould

iTrader: (3)

Awesome, cause after i get a few bugs out and need to tune, ima need the most help, got a huge *** cam

xpndbl3

iTrader: (5)

i doubt the cam is that huge....i've seen bigger

Camarothatcould

iTrader: (3)

Basic Operating RPM Range: 2,300-6,500
Intake Duration at 050 inch Lift: 240
Exhaust Duration at 050 inch Lift: 246
Duration at 050 inch Lift: 240 int./246 exh.
Advertised Intake Duration: 284
Advertised Exhaust Duration: 296
Advertised Duration: 284 int./296 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.507 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Valve Lift with Factory Rocker Arm Ratio: 0.507 int./0.510 exh. lift
Lobe Separation (degrees): 110
Intake Valve Lash: 0.000 in


Huge for my setup

xpndbl3

iTrader: (5)

that's still a hydraulic cam, it'll be fine for your combo, a nice 3500 stall and you'll be set, a big cam is solid roller or solid lifters

Camarothatcould

iTrader: (3)

Nope, this is a flat tappet cam. And I do have a 3500 stall. The combo is proving to be fret. I cant get a good tune and cant get it timed for ****. But it still aton of go, but alot more potential to be unlocked when I finally get the bugs out of it

xpndbl3

iTrader: (5)

i could tune it up for ya should take me a couple of hours if you can get the car out this way.

Camarothatcould

iTrader: (3)

I'll get some video of the car running of how it is right now, see if you can help diagnose. If not, that could be arranged, I just dont know what kind of beer you drink nor can i buy it legally. . . lolz