3.1 V6 - Parting out entire engine bay, engine and all accessories

Subscribe
Aug 18, 2011 | 12:08 PM
  #1  
Here is a list of available parts that are left.
  • Starter and brackets - $30 shipped
  • Wiper motor - $15 shipped
  • Cruise Control system w/ cables - $25 shipped
  • Cooling fan (wires and switch included for hardwired installation) - $25 shipped
  • Coolant/Washer overflow tanks - $15 shipped for both
  • Stock Intake System - $25 shipped
  • A/C Condenser - $25 shipped




Aug 18, 2011 | 10:00 PM
  #2  
Re: 3.1 V6 - Parting out engine and all accessories
how much for upper and lower intake minifolds, injectors,rails, and tb?
Aug 18, 2011 | 10:12 PM
  #3  
Re: 3.1 V6 - Parting out engine and all accessories
Quote: how much for upper and lower intake minifolds, injectors,rails, and tb?
PM sent
Aug 19, 2011 | 09:27 AM
  #4  
Re: 3.1 V6 - Parting out engine and all accessories
added all sold parts in the original post, will update as more are sold.
Aug 19, 2011 | 11:57 PM
  #5  
Re: 3.1 V6 - Parting out engine and all accessories
auto or stick? price with shipping to 84713 on v6 motor mounts and trans crossmember please
Aug 20, 2011 | 12:28 AM
  #6  
Re: 3.1 V6 - Parting out engine and all accessories
Quote: auto or stick? price with shipping to 84713 on v6 motor mounts and trans crossmember please
It's an auto. I still have a ways to go before I can remove those two parts as the engine and tranny are still in the car and I need them to keep the engine and tranny in there.

Unless there is a way to remove the tranny cross member and the car will still be able to roll/be pushed.
Aug 20, 2011 | 01:03 AM
  #7  
Re: 3.1 V6 - Parting out engine and all accessories
Quote: It's an auto. I still have a ways to go before I can remove those two parts as the engine and tranny are still in the car and I need them to keep the engine and tranny in there.

Unless there is a way to remove the tranny cross member and the car will still be able to roll/be pushed.
its cool im not ready to start swaping the v6 into the firebird just yet anyways so let me know when u pull the engine out ill need both halfs of the mounts ie motor side and k member side
Aug 20, 2011 | 11:55 AM
  #8  
Re: 3.1 V6 - Parting out engine and all accessories
Quote: its cool im not ready to start swaping the v6 into the firebird just yet anyways so let me know when u pull the engine out ill need both halfs of the mounts ie motor side and k member side
I'll keep you in mind once I reach that point.
Aug 23, 2011 | 03:42 PM
  #9  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
bump
Aug 23, 2011 | 06:51 PM
  #10  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
holy crap dude where have you been? lol

im assuming this motor is coming out of a different car than your sig pic car
Aug 23, 2011 | 07:41 PM
  #11  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Quote: holy crap dude where have you been? lol

im assuming this motor is coming out of a different car than your sig pic car
Been outta the 3rd Gen world for a while. Definitely not the same car

3.1 V6 - Parting out entire engine bay, engine and all accessories-askfdsg.jpg  

Aug 23, 2011 | 07:59 PM
  #12  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
haha looking awesome...always liked that car

ill see your lsx and raise you a turbo 3.4

3.1 V6 - Parting out entire engine bay, engine and all accessories-picture-330.jpg  

Aug 23, 2011 | 10:59 PM
  #13  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Quote: haha looking awesome...always liked that car

ill see your lsx and raise you a turbo 3.4
Nice! Need any parts from my car, let me know
Aug 27, 2011 | 12:15 PM
  #14  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
bump
Aug 31, 2011 | 11:29 PM
  #15  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
bump, updated with some more sold parts
Sep 6, 2011 | 01:43 PM
  #16  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
to the top...
Sep 19, 2011 | 10:52 AM
  #17  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
bump.
Oct 12, 2011 | 11:50 AM
  #18  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
to the top.
Nov 28, 2011 | 10:47 AM
  #19  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
to the top, still some parts available off the v6
Nov 28, 2011 | 07:28 PM
  #20  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
What do you have? I need a couple smaller parts...
Nov 28, 2011 | 07:47 PM
  #21  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Quote: What do you have? I need a couple smaller parts...
Pretty much everything. Alternator/AC compressor are gone, along with the upper intake & TB
Nov 28, 2011 | 09:02 PM
  #22  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Power steering pump bracket (the aluminum one on the front, not the steel one on the back), rocker arm nuts, and the starter bolts?
Nov 28, 2011 | 09:25 PM
  #23  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Quote: Power steering pump bracket (the aluminum one on the front, not the steel one on the back), rocker arm nuts, and the starter bolts?
Here is a pic of the engine, is this the bracket you are looking for?

Also, the rocker arm nuts are available. Where are the starter bolts? can you circle them in the main photograph in my first post?

Thanks

3.1 V6 - Parting out entire engine bay, engine and all accessories-img_0427.jpg   3.1 V6 - Parting out entire engine bay, engine and all accessories-img_0430.jpg  

Nov 28, 2011 | 09:33 PM
  #24  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Yeah, the filthy PS pump bracket as seen in the front pic of the engine... The starter bolts are the 2 bolts that hold the starter to the engine block through the drive end housing (on the starter). There's fat ones and skinny ones, and I seem to only have one of each at the moment, and I need 2 fat ones (skinny ones have killed 2 starter drives on me so far because they allow the starter to shift ).
Nov 28, 2011 | 09:36 PM
  #25  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Quote: Yeah, the filthy PS pump bracket as seen in the front pic of the engine... The starter bolts are the 2 bolts that hold the starter to the engine block through the drive end housing (on the starter). There's fat ones and skinny ones, and I seem to only have one of each at the moment, and I need 2 fat ones (skinny ones have killed 2 starter drives on me so far because they allow the starter to shift ).
Ok, shoot me a PM with an offer for all the parts (including the battery tray) via PM and we'll go from there. I can get them off the car and shipped out by Wednesday.
Nov 29, 2011 | 09:56 PM
  #26  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Price on the heater pipes that run along right hand frame rail - shipped to 74006

Thanks,
Richard.
Nov 29, 2011 | 11:04 PM
  #27  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Quote: Price on the heater pipes that run along right hand frame rail - shipped to 74006

Thanks,
Richard.
Can you send me a picture of what you are looking for? Want to make sure I have the exact part. Thanks!
Nov 30, 2011 | 09:39 PM
  #28  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
those strut mounts looks new....hmmm, how old?
Dec 1, 2011 | 10:04 AM
  #29  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Quote: those strut mounts looks new....hmmm, how old?
Maybe 1 year, not even
Dec 1, 2011 | 03:47 PM
  #30  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
How much? What brand are they and where did you buy them?
Dec 1, 2011 | 10:44 PM
  #31  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Quote: How much? What brand are they and where did you buy them?
PM sent
Dec 9, 2011 | 05:48 AM
  #32  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Looking for these parts for a 3.1
Water pump pulley
Engine oil dipstick tube
Power steering pump bracket
Shipping would be to 32301 thanks !!!
Dec 9, 2011 | 08:32 AM
  #33  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Quote: Looking for these parts for a 3.1
Water pump pulley
Engine oil dipstick tube
Power steering pump bracket
Shipping would be to 32301 thanks !!!
Pm sent!
Dec 9, 2011 | 09:00 AM
  #34  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
how much for the lifters? and did they chatter or tick, any valve train noise back when it ran?
Dec 9, 2011 | 09:47 AM
  #35  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Quote: how much for the lifters? and did they chatter or tick, any valve train noise back when it ran?
No noise back when it ran, shoot me a PM with an offer on them. I tried pricing them, but all I can find are lifters included as part of a camshaft kit.
Dec 19, 2011 | 11:18 AM
  #36  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
to the top
Dec 19, 2011 | 09:58 PM
  #37  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Still have the engine harness? If so how much shipped to 44663?
Dec 20, 2011 | 10:20 AM
  #38  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Quote: Still have the engine harness? If so how much shipped to 44663?
Yes I do. I'll do it for $40 shipped. I'll throw in every possible piece of wiring I can find in the engine bay
Dec 20, 2011 | 08:24 PM
  #39  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
PM sent
Dec 21, 2011 | 09:26 AM
  #40  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Updated first post with available parts and prices.
Dec 21, 2011 | 09:40 AM
  #41  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
how's the power steering pressure hose? any signs of leaking?

I could use one
Dec 21, 2011 | 10:05 AM
  #42  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Quote: how's the power steering pressure hose? any signs of leaking?

I could use one
I'll post up some pictures when I get home tonight.
Dec 25, 2011 | 12:11 AM
  #43  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Mounts sold!! Lol you still have the harness? Looking at an lt1 swap soon and need an extra harness for when I ship the lt harness to pocket so I can drive my car while it's getting done let me know
Dec 25, 2011 | 11:36 PM
  #44  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Quote: Mounts sold!! Lol you still have the harness? Looking at an lt1 swap soon and need an extra harness for when I ship the lt harness to pocket so I can drive my car while it's getting done let me know
Thanks, I will get them out to you once payment is received.

Sorry harness and all electrical engine wiring has been sold.
Dec 26, 2011 | 12:21 AM
  #45  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Alright and payment will be there tomorrow
Feb 13, 2012 | 08:10 PM
  #46  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
You still parting the engine?
Feb 14, 2012 | 08:17 AM
  #47  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Quote: You still parting the engine?
The car is gone, but I have some parts I removed before I junked it. What exactly are you looking for?
Feb 14, 2012 | 11:48 AM
  #48  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
i thought u were just parting the engine,,,,didnt know u junked the whole damn car. what was wrong with the car?
Feb 14, 2012 | 04:03 PM
  #49  
Re: 3.1 V6 - Parting out entire engine bay, engine and all accessories
Was wanting the heads off the engine
Subscribe