[NC] 91rs v6
Thread Starter
Joined: Sep 2011
Posts: 1,037
Likes: 22
From: nc
Car: 91RS
Engine: carb'd 357 vortec
Transmission: 700r4
Axle/Gears: 3.42 posi
91rs v6
I have some parts that might be some good and if you need some just let me know. This a 3.1l v6 engine that the parts are coming off of. obviously if I am parting out the engine and planning on dropping in my 357v8 then the motor is gone but exterior parts are still in decent shape for the price. you pay shipping. last time the car was driven the tranny worked also (for those able to pick up) . intake, heads, alt, starter, hoses, dizzy, sensors, long upper and lower plastic noses( where the air filters are), charcoal canister, I am dropping in a non-computer controlled engine and dizzy and therefore have no intention of hacking up the wire harnesses. and due to the fact that the car is in pristine condition I don't intend on taking the dash apart AT ALL! short of that if you need anything off the engine I will take it off and ship to you for less than what the stores and maybe even the salvage yards will charge. the car was siting up for about a year so just let me know. if no takers then off to the junk yard it goes! I believe the ac works so I don't want to disconnect it unless I find out that its easy to fix.
Joined: Mar 2011
Posts: 6,287
Likes: 41
From: Northwest Ohio
Car: 1991 Camaro RS
Engine: Lq4 6.0 SBE s485 turbo E85
Transmission: Fsi th400 stage 4. TSI 5500 st
Axle/Gears: Strange S60 4:10s
Re: 91rs v6
I sure wish I lived closer. Id buy the whole engine set up.
Bump for ya.
Bump for ya.
Last edited by fasteddi; Aug 20, 2013 at 03:32 PM.
Thread Starter
Joined: Sep 2011
Posts: 1,037
Likes: 22
From: nc
Car: 91RS
Engine: carb'd 357 vortec
Transmission: 700r4
Axle/Gears: 3.42 posi
Re: 91rs v6
Last edited by budget builder; Aug 28, 2013 at 03:43 PM.
Supreme Member
iTrader: (8)
Joined: Aug 2003
Posts: 7,240
Likes: 6
From: LeRoy, NY
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Re: 91rs v6
I'm looking for the power steering pressure hose that goes between the pump and the steering gear.
And if you're going to be parting the car in the pic above, I'd also be interested in all 3 of the silver Z28 emblems...
And if you're going to be parting the car in the pic above, I'd also be interested in all 3 of the silver Z28 emblems...
Thread Starter
Joined: Sep 2011
Posts: 1,037
Likes: 22
From: nc
Car: 91RS
Engine: carb'd 357 vortec
Transmission: 700r4
Axle/Gears: 3.42 posi
Re: 91rs v6
power steering hose no problem send a PM and we will iron out the details and I would sell the badges but then the gfx wouldn't be worth anything.
Thread Starter
Joined: Sep 2011
Posts: 1,037
Likes: 22
From: nc
Car: 91RS
Engine: carb'd 357 vortec
Transmission: 700r4
Axle/Gears: 3.42 posi
Re: 91rs v6
exterior and interior parts in the large pic above are for sale the drivers side door molding and quarter panel and front chin spoiler are already spoken for as of this afternoon. come and get it. the rest of the 91-92 gfx are still here and ready to go. the v6 engine and tranny are still complete (motor locked up tight) but once again if you need something off the motor(intake, breather, 100amp alt, pulleys, sensors, injectors, anything like that yu can get them at a reduced price from new and even scrap yard.) ALL PRICES NEGO. of course (as is) thx for shopping with us and we take paypal and ship no later than the day after payment is received.
Thread Starter
Joined: Sep 2011
Posts: 1,037
Likes: 22
From: nc
Car: 91RS
Engine: carb'd 357 vortec
Transmission: 700r4
Axle/Gears: 3.42 posi
Re: 91rs v6
Both window switches
both door panel trim
both door sills
both kick panels
rear view mirror
both tail lights
91-92 front chin
91-92 driver door molding
91-92 driver side rear quarter panel
both front seat belts
both front seat belt latches
both arm rests
rear power hatch switch
Console lid
all gone!!!!!!!!!!!!!!!!
both door panel trim
both door sills
both kick panels
rear view mirror
both tail lights
91-92 front chin
91-92 driver door molding
91-92 driver side rear quarter panel
both front seat belts
both front seat belt latches
both arm rests
rear power hatch switch
Console lid
all gone!!!!!!!!!!!!!!!!
Trending Topics
Thread Starter
Joined: Sep 2011
Posts: 1,037
Likes: 22
From: nc
Car: 91RS
Engine: carb'd 357 vortec
Transmission: 700r4
Axle/Gears: 3.42 posi
Re: 91rs v6
Transmission xmember, torque arm, and drive shaft,and exhaust and this bby is ready to be pulled! Trying to have it out by 8pm b4 the mosquitos git bad.
Thread Starter
Joined: Sep 2011
Posts: 1,037
Likes: 22
From: nc
Car: 91RS
Engine: carb'd 357 vortec
Transmission: 700r4
Axle/Gears: 3.42 posi
Re: 91rs v6
the v6 is out! if there is something that you are looking for then please let me know quickly. check out my other ad also!!!!!!!!!!!!!!!!!!!
https://www.thirdgen.org/forums/exte...0-91-92rs.html
https://www.thirdgen.org/forums/exte...0-91-92rs.html
Last edited by budget builder; Sep 17, 2013 at 04:31 PM.
Member
Joined: May 2012
Posts: 251
Likes: 0
From: Richmond, VA
Car: 1992 Firebird
Engine: 3.1L
Transmission: Manual T5
Axle/Gears: Stock
Re: 91rs v6
How much for the throttle body, coolant temperature sensor, and EGR?
Last edited by Stewie; Sep 19, 2013 at 03:22 AM.
Thread Starter
Joined: Sep 2011
Posts: 1,037
Likes: 22
From: nc
Car: 91RS
Engine: carb'd 357 vortec
Transmission: 700r4
Axle/Gears: 3.42 posi
Thread Starter
Joined: Sep 2011
Posts: 1,037
Likes: 22
From: nc
Car: 91RS
Engine: carb'd 357 vortec
Transmission: 700r4
Axle/Gears: 3.42 posi
Re: 91rs v6
remember prices are negotiable!!!!!!!!!!! WHEN I GET THE V8 OUT. I'M TAKING THE BLACK V8 CAR AND THE PULLED V6 MOTOR AND TRANNY TO THE SCRAP YARD IF YOU NEED SOMETHING PLEASE LET ME KNOW. I have video on my phone that I am trying to figure out how to put on TGO. I cant seem to get it to upload to youtube so I can link it but I will keep trying. thx!!!!!!!!
Thread Starter
Joined: Sep 2011
Posts: 1,037
Likes: 22
From: nc
Car: 91RS
Engine: carb'd 357 vortec
Transmission: 700r4
Axle/Gears: 3.42 posi
Re: 91rs v6
the throttle body, coolant temperature sensor, and EGR GONE!!!!!! FOR $50+SHIIPPING . IF THERE IS SOMETHING THAT YOU ALL NEED LET ME KNOW. CHECK OUT MY OTHER AD FOR THE BLACK V8 CAR THAT I AM PARTING OUT. SEE WHAT IS GONE AND STILL THERE AND LET ME KNOW. I'm NOT TRYING TO GET RICH SO IF I CAN HELPYOIU OUT LET ME KNOW! as soon as I can pull the v8 out and drop into the v6 recipient these parts WILL BE GONE!!!! and as always thk you!
Thread Starter
Joined: Sep 2011
Posts: 1,037
Likes: 22
From: nc
Car: 91RS
Engine: carb'd 357 vortec
Transmission: 700r4
Axle/Gears: 3.42 posi
Re: 91rs v6
k update update update ********** these parts are spoken for: v6 throttle body,v6 egr valve, v6 coolant temp sensor, sth gen front and rear seats, entire rearend w/new brakes and brake drums-- $175, both lowrer a-arms $20+shipping (still trying to remove), both front wheels 91-92 z28 (non polished) w /tires- $60 delivered. I told u I was getting rid of everything. I have deal worked out that when I pull the motor 2ppl said the can haul the rest of the chassis away for free. If u need what's left b4 the junk yard gets it let me know. Someone is looking at fenders. So evrything listed above will be pulled b4 junkyard but not held long after. Just long enuff for the late ppl. V6 parts avail. Are: intake, coil,ps pump, hih press. Hose, starter, 100amp(I think) alt,tensioner,v6 tranny($150),stock dizzy
Thread
Thread Starter
Forum
Replies
Last Post







