[Sold] For sale NEW Spohn Front Coil over kit modified for any CC plates
03-04-2015, 12:35 AM
#1
For sale NEW Spohn Front Coil over kit modified for any CC plates
I bought a new SPohn coil over kit but going another route. I had special upper spring isolators made so these can be run with any aftermarket CC solid bearing plates. So if you have aftermarket CC plates you can just bolt this on. The upper spring isolators are custom machined from T6 billet aluminum. I also has custom 1/2" spacers made to fit between the CC plates and the strut tower… this gives you 1/2" more drop. You can swap in any size spacer to increase lowering. Kit was mocked up but never run.
This is NOT a complete spohn coil over kit. Does NOT include CC plates and the retaining bolt Y brackets (holds bolts to go through the CC plates) as i did not get them bc I was running hot part CC plates. But If you have any solid bearing caP CC plates this will work for you. Hotpart, UMI, Founders etc.
The kit includes:
2 Billet spring adjusters to fit any strut but Blistein I believe, fit my KYB AGXs
4 thrust washer assemblies
2 under strut tower support plates (already clearanced to fit firebirds)
2 QA1 12" 300lb coil over springs brand new
2 spanner wrenches
Ive included in the kit:
6 T6 billet aluminum 1/2" spacers 5/16-18" thread for CC spacing off tower
2 T6 Billet aluminum upper spring isolators to keep springs located much better than spohns CC plates… also allows use of any CC plates.
It fit great, and car sat about where I had it lowered with 1.5 coils cut off my moog 5664s. Im selling as I need money for other parts.
Asking $310 plus the ride. I can fit it in a Large flat rate box (its pretty tight without a lot of packing material around the springs) I believe for like $24 with $300 worth of insurance. I also have the original box and the instructions if you would want me to pack it more. That is good for the continental USA 48 states.
Pic shows whats included.
This is what it looks like on the car.
Black plate not included
This is NOT a complete spohn coil over kit. Does NOT include CC plates and the retaining bolt Y brackets (holds bolts to go through the CC plates) as i did not get them bc I was running hot part CC plates. But If you have any solid bearing caP CC plates this will work for you. Hotpart, UMI, Founders etc.
The kit includes:
2 Billet spring adjusters to fit any strut but Blistein I believe, fit my KYB AGXs
4 thrust washer assemblies
2 under strut tower support plates (already clearanced to fit firebirds)
2 QA1 12" 300lb coil over springs brand new
2 spanner wrenches
Ive included in the kit:
6 T6 billet aluminum 1/2" spacers 5/16-18" thread for CC spacing off tower
2 T6 Billet aluminum upper spring isolators to keep springs located much better than spohns CC plates… also allows use of any CC plates.
It fit great, and car sat about where I had it lowered with 1.5 coils cut off my moog 5664s. Im selling as I need money for other parts.
Asking $310 plus the ride. I can fit it in a Large flat rate box (its pretty tight without a lot of packing material around the springs) I believe for like $24 with $300 worth of insurance. I also have the original box and the instructions if you would want me to pack it more. That is good for the continental USA 48 states.
Pic shows whats included.
This is what it looks like on the car.
Black plate not included
Last edited by customblackbird; 08-18-2015 at 01:18 PM.
05-28-2015, 06:58 PM
#7
Member
Join Date: Jul 2011
Location: Delaware
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Firebird, 91 Trans Am
Engine: L31 with HSR, LB9
Transmission: 700R4, 700R4
Axle/Gears: '99 10 bolt 3.90, '01 10 bolt 3.42
Re: For sale NEW Spohn Front Coil over kit modified for any CC plates
If he doesn't take them I will.
Trending Topics
06-29-2015, 08:39 AM
#10
Re: For sale NEW Spohn Front Coil over kit modified for any CC plates
BUMP!! Rear coil over kit just sold. THis would be a great stiffer than stock front setup. SOOO much easier to install than the stock springs with ride height adjustability.
Shoot me a offer!!!
Shoot me a offer!!!
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
TA8487
Engine/Drivetrain/Suspension Parts for Sale
0
08-11-2015 09:02 PM