after a set of either 113 or 081 casting heads. hit me up if you have either

 

Im 99.99% sure I have a set of 081 heads at my shop... Ill look at them tonight and get back to ya... Ill make ya a great deal just so I can get them out of the shop...

 

it was a bust with kenwood. he had a set of 083's. anyone else?

 

I have 2 sets of cast iron heads that i am in the process of getting rebuilt, one set has centerbolt valve cobers and the other has 4 corner valve cover bolts, both sets are 1.94/1.5 valve heads. I would have to take a trip to the shop to check the casting numbers, dont know if you would even be interested in them.

~Nick~

 

bump

 

981 duel springs, .600 lift clearance, ARP screw in studs, 10deg locks, stainless exhaust valves, brand new valve job 14deg back cut on all... all comp cams parts... porting done 1205 gasket match, smoothed out all imperfections, bowl cleaned out...bumps removed from floor and ceiling...

cumbustion chambers untouched.
just not enough head for the cc306 cam and HSR intake.... going bigger

pm if interested

 

I just listed a set of stock #113's

 

I have a set of 081's need rebuilt 50$ + Shipping from OK, LMK if interested