Hey everyone

I am looking for a full t56 swap for my 350 ( right now its has the 700r4)

Only part I have for.this swap so far is the firebird radio pod haha. I am located in 20902 md.

I would be willing to drive a couple hours if need be . I would like to get this car on the road by the end of winter .

 

bump

 

How much are looking to spend?

Im considering selling my T-56, under 1000 miles since full rebuild, fully upgraded to handle 650+ hp, internals were purchased from D&D. Transmission was built by professional shop here in AZ.

This includes the T-56, pedals, master cylinder, slave cylinder, neutral balance fly wheel, etc... for the right price I will include the Spohn cross member with DS loop and Spohn torque arm.

 

How much are you asking ,and what clutch and do you have documention from the shop?
Also it would have to be shippped such is also a factor

 

bump.

 

Deadhead can I get some more info please ?

 

The tranny has a stock pp and clutch, I found the invoice from D&D but I cant find the paper work from the transmission shop that did the rebuild for me.

Im asking 2500 for everything for the trans. I am still up in the air if I want to sell it or not I might be installing it into my El Camino next week.

If I do install it, I still the the Spohn Cross member with DS loop and torque arm that I will be selling. I am actually moving to Aberdeen MD area next month and can have the moving company take it if you dont need it immediately to save on shipping cost.

 

Pm me your number please

 

Bump

 

bump

 

Bump

 

Hey man i've got a T56 spohn cross member with DS loop and torque arm thats for sale Im bringing with me to MD if your interested pm me and Ill get ahold of you once Im moved out there.

 

I'm planing on going with the one from hawks . Unless you would be ailing to give me a hella of a
deal( crossmember)

 

Pm an offer for it

 

bump.

deadhead sorry i did not get the notification, can you email me pics of the x member/ driveshaft loop

 

Bump still needing this swap

 

bump

 

http://smd.craigslist.org/pts/3469990921.html
http://washingtondc.craigslist.org/n...431177489.html

 

yooo long time man, how ya doin and hows the car? didnt know you where still around

fist link I am waiting on the guy to text me more pics...

second link guy didnt get back to me.

 

I'm good man, same old. The motor is torn down right now, but it should be ready to go by March. I just made plans to do cruise weekend again in OC this year, I'll be staying right across the street from Seacrets. You gonna go?

 

If I can find a t56 swap and get it done by then is be more than willing to go

 

bump

 

bump please

 

bump

 

Bump

 

Bump again!

 

bump again

 

bump

 

dude your best bet is to stop looking for all the parts you need ... start looking for a cheap 4th gen car with the parts , that will be eatier as nobody that has a t-56 will give it up. alot of the forth gen owners with t-56 dont know how special it is and will let a raggy car go cheap like the one I got for $1000 with lt1 t-56 combo took all the t-56 stuff sold the lt1 and disc rear and junked the car . got everything i needed and made $300 bucks . search craigslist EVERYDAY one will turn up with primer black ripped up seats and a few dents in it with a sagging headliner and loud exhaust . for 2000 talk him down and you have what you need for almost nothing . good luck .

 

I've thought about that, but the only problem is I do not have space to put another car if I had the room I would have picked up one already.

 

the thing about getting a t-56 is .. lets say I have one for $1200 sounds good rite ? well now you need pedals , flywheel, clutch, driveshaft, thats another $1000 the cross member is non negosible, you have to buy that. so you'll be in to it for $2500-$3000 with the rite 4th gen you can be into it for almost nothing . just an Idea ....find the rite car . buy it. then rent an out side storage spot to put your car for a week or two strip every mint part possible from the forth gen , send it to the crusher for $400-500 by the time your done selling what you have pulled ,you will have saved a ton of cash . and If you buy a running car you can test the trans. If somebodys selling a t-56 on this site I would seriously wonder why ... the t-56 is one of the most desirable mods in the third gen clan. the forth gen guys are not actuall camaro nuts like the rest of us . they just think its cool to have one more gear and dont even know what t-56 is. all this is just my oppinion . I hope you veiw this as a conversation rather than an arguement.

 

I've talk to abunch of people that were willing to sell them from 1000-1600 for everything needed but at the times I did not have the funds

edit: guess i can start looking for a complete 4th gen ...

 

rite on man ! be patient and ck craigslist every day , you want one of those deals that everybody kicks themselves over because they didn't act fast enough . so my advise is if you see one for a decent price ($2000) grab it fast before the next guy like you sees it . good luck bud

 

Trust me man , I have been checking craigslist and other forums daily.

 

BUMPP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

bump again and again

 

OK how much do you want to spend ? there are some 4th gens here with 6 speeds for about 3-4000 I wont say where here is , as not to have them all bought up . but maybe I can turn you onto one a 1994 with lt1 driver with vette rims . where you from?

 

Sounds like your trying to sell a car. Or you dont know what your talking about.

 

I have seen these swaps go from 1000- 1600

I don't have 3k to spend on this swap. If I did I would be buying all new stuff

I much rather buy the parts I need and not a full car, like I said before I do not have the space to put it and adding a storage unit to my monthy bills is not going to help me out any.

So If I just get the parts I need I can store them , till I can install them with out having to worrie about a full other car, I have been trying to sell a ton of 3rd gen stuff with no luck so why would I have luck selling a 4th gen that I pull most of the good parts from?

 

FRIDAY BUMP

 

i have a 6 speed out of my 93Z28.have the pedals and clutch.don't know if it's what your looking for, but if your interested i want 600.00 for everything.P.S.-i'm in new jersey

 

Anything wrong with it ? I need everything for the swap still. Pedals hydrollics ,clutch master and slave shift boots ( upper and lower ) shifter ....everything pretty much to covert this car from auto to manual

 

monday morning bump!

 

pm'd

 

for 600 you better grab it. T56 are getting more expensive as the parts are skyrocketing in price.
Have an almost brand new T56 and wouldnt let it go for even 1500...used to be you could pick them up for 500-1000 in mint cond

 

Have my herd anything from him

 

I have a 93-97 t56. Has everything but clutch. Pm if interested. Also posted it for sale in parts for sale and lx parts for sale section.

 

Roc - how much you looking to get ?

 

Hey man I was looking through your add and I would suggest checking your local salvage yards. I was calling around and came across on if the smallest yard near me and was able to talk the guy into lettin me have the whole set up (tranny, petals, clutch, flywheel, shifter, hydraulics, etc.) for under $1000 just be hangin out b.s.ing with him and giving him my word that I came back over once it was done and lit the tires up for him.

 

Thank for the advice I actually just found a killer deal on a swap . Got to get it in two weeks .