I finally swapped out the 305 in my 83 z28 for a 350. Talk about some long hours and hard work. Here is the car with the old engine.

 

Here is a close up

 

Here it is comming out

 

Here is the new 350

 

This was the only pic I had of it actually in the car.

 

oops. a pic would help

 

The car is running now but needs alot of tunning. Im sure this will take a good while.

 

cool man, i just got done with my swap not to long ago, and am tuning as well. it takes a while to get everything lined out.

 

Looks Good !

 

Thank you. I worked on tunning it all last night and I am still not happy with the way it runs.

 

looks niiiiice lol what kind of specs on the new motor? looks clean as hell

 

It is a 350 .30 over. edelbrock 600 cfm electric chock carb. edelbrock performer intake. Crane cam...cant remember the specs. and 1.94, 1.50 heads. I will put new heads on later. maybe some 2.02's but money became an issue up towards the end. I installed a new clutch as well and it is mounted to a T-5. Hopefully somewhere around 300 horse at the flywheel, but that might be pushing it.