Exhaust Post your questions and suggestions about stock or aftermarket exhaust setups. Third Gen exhaust sound files and videos!

WANTED kit for true duals!

Thread Tools
 
Search this Thread
 
Old Aug 18, 2009 | 04:17 PM
  #1  
FlippindaBird's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Apr 2007
Posts: 773
Likes: 0
From: The Pocono Mountains, PA
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
WANTED kit for true duals!

why hasnt any manufacturer stepped up with a kit to convert to true duals. i know this is probably illegal just about everywhere, but if i did everything legal id probably be bored as hell... anyway alot of these cars "3rd gens" are used as race cars anyway... i know there are posts with members making duals on here but they all spend like 300$ or more in parts then do the work themselves or have a muffler shop do it then all the labor is a crazy amount of money... i want a kit that i can put on myself that is true dual exiting in the factory tailpipe location that doesnt cost 1000$ is that too much to ask? i have seen in jegs that 2.25" kit from dynomax for 170$, thats more like it, but i want a 2.5" kit.
anyone whos done this and can give me a complete parts list without saying "____ must be fabbed" please post here. i was thinkin of buyin a kit for say a chevelle and just riggin it... i mean whats the major obstacle involved here the transmission cross member and the rear correct?? im not too worried about ground clearance as my car is not gonna get driven on bumpy streets but maybe once or twice a year... i do want it to tuck up fairly nice tho... have a crossover pipe pref an X , and connect to long tube headers... its time the aftermarket steps up and does this dontcha think???

Last edited by FlippindaBird; Aug 18, 2009 at 04:18 PM. Reason: forgot somethin
Reply
Old Aug 18, 2009 | 05:26 PM
  #2  
Stephen's Avatar
Banned
iTrader: (12)
 
Joined: Jul 1999
Posts: 12,212
Likes: 13
From: Bertram (outside Austin), TX
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: WANTED kit for true duals!

PLEASE USE THE FEATURE!

I've posted a direct link to one several times in the last month & will not post it again, since I know it is already here several times.

Reply
Old Aug 18, 2009 | 05:37 PM
  #3  
Bullydawg's Avatar
Supreme Member
iTrader: (7)
 
Joined: Nov 2006
Posts: 3,740
Likes: 15
From: Alamogordo, NM
Car: 88 Formula 350
Engine: 5.7
Transmission: T-56
Axle/Gears: 9" 3.89
Re: WANTED kit for true duals!

Yeah, do a search. One guy bought all the parts and it was pretty simple. I think he did it for under 300 or so, and he lists all the pieces you need with all the prebent tubes.
Reply
Old Aug 18, 2009 | 05:41 PM
  #4  
FlippindaBird's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Apr 2007
Posts: 773
Likes: 0
From: The Pocono Mountains, PA
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: WANTED kit for true duals!

thanks for the good word bully, i did search but i did not find the guy with the price list under 300$
SORRY IM AN IDIOT STEPHEN, WILL TRY NOT TO OFFEND U AGAIN. *BOWS TO STEPHENS SUPREMACY*
Reply
Old Aug 18, 2009 | 05:43 PM
  #5  
FlippindaBird's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Apr 2007
Posts: 773
Likes: 0
From: The Pocono Mountains, PA
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: WANTED kit for true duals!

and really the point of the rant was that the aftermarket needs to offer this so we dont have to peice it together ourselves sorry for putting my 2 cents in...
Reply
Old Aug 18, 2009 | 05:53 PM
  #6  
Bullydawg's Avatar
Supreme Member
iTrader: (7)
 
Joined: Nov 2006
Posts: 3,740
Likes: 15
From: Alamogordo, NM
Car: 88 Formula 350
Engine: 5.7
Transmission: T-56
Axle/Gears: 9" 3.89
Re: WANTED kit for true duals!

Aftermarket companies aren't too interested because they aren't smog legal. How many people are going to buy something illegal and have to change it back when smog comes around?

True Duals are badass, but most people are interested in putting a legal exhaust on a stockish V8 for daily driving and such...
Reply
Old Aug 18, 2009 | 05:56 PM
  #7  
V6F1R3BRD's Avatar
Senior Member
 
Joined: Feb 2009
Posts: 660
Likes: 0
From: N. Virginia
Car: 1988 Firebird - 1998 Z28
Engine: 2.8 - LS1
Re: WANTED kit for true duals!

Originally Posted by FlippindaBird
thanks for the good word bully, i did search but i did not find the guy with the price list under 300$
SORRY IM AN IDIOT STEPHEN, WILL TRY NOT TO OFFEND U AGAIN. *BOWS TO STEPHENS SUPREMACY*

lol chill man, yes the search is VERY useful, but most of the time you see people on hear that can fabricate their own ex system. but as for companies that sell them, few to none.
Reply
Old Aug 18, 2009 | 06:07 PM
  #8  
FlippindaBird's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Apr 2007
Posts: 773
Likes: 0
From: The Pocono Mountains, PA
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: WANTED kit for true duals!

LOL @ "stock" and "Daily driven" but yeah i getcha... thing is, they have it for like every other performance minded vehicle just look at summit and jegs... theres all these kits and 3rd and 4th gens are the only ones without a true dual kit
Reply
Old Aug 18, 2009 | 06:08 PM
  #9  
FlippindaBird's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Apr 2007
Posts: 773
Likes: 0
From: The Pocono Mountains, PA
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: WANTED kit for true duals!

still lookin for 300$ price list
Reply
Old Aug 18, 2009 | 06:14 PM
  #10  
Bullydawg's Avatar
Supreme Member
iTrader: (7)
 
Joined: Nov 2006
Posts: 3,740
Likes: 15
From: Alamogordo, NM
Car: 88 Formula 350
Engine: 5.7
Transmission: T-56
Axle/Gears: 9" 3.89
Re: WANTED kit for true duals!

You know, I looked for that thread too, but couldn't find it either. I remember it though, he had all the specific prebent tubes, and clamps, and it had an X-pipe and pictures and EVERYTHING... Huh. Try looking up x pipe or something.

If you can't find it, ill try again later. It was a great thread, and I wouldn't mind checking it out again.
Reply
Old Aug 18, 2009 | 06:24 PM
  #11  
keeslinger31's Avatar
Senior Member
 
Joined: Dec 2007
Posts: 614
Likes: 3
From: Missouri
Car: Camaro RS
Engine: obd2 350 lt1
Transmission: T56
Axle/Gears: 3.23
Re: WANTED kit for true duals!

So what make dual exhaust illegal? Because you replace the cat? What if you put two in for each side?
Reply
Old Aug 18, 2009 | 06:26 PM
  #12  
Stephen's Avatar
Banned
iTrader: (12)
 
Joined: Jul 1999
Posts: 12,212
Likes: 13
From: Bertram (outside Austin), TX
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: WANTED kit for true duals!

Originally Posted by FlippindaBird
and really the point of the rant was that the aftermarket needs to offer this so we dont have to peice it together ourselves sorry for putting my 2 cents in...
You missed my point...

There IS a true dual pre-made kit already available. Search here or Summit/Jeg's.

BTW...I'm not "supremacy" of anything....I'm REALLY biting my tongue, to have only posted what I did already.
Reply
Old Aug 18, 2009 | 06:32 PM
  #13  
jerrod75110's Avatar
Member
 
Joined: Mar 2003
Posts: 185
Likes: 0
From: corsicana tx
Car: 89 camaro
Engine: 383
Transmission: 350 tci 3000 stall
Axle/Gears: 3.73
Re: WANTED kit for true duals!

you know if someone would put together a nice mandrel bent kit that had decent ground clearance could make some money on here.. I surprized some hasnt done it yet!
Reply
Old Aug 18, 2009 | 06:44 PM
  #14  
keeslinger31's Avatar
Senior Member
 
Joined: Dec 2007
Posts: 614
Likes: 3
From: Missouri
Car: Camaro RS
Engine: obd2 350 lt1
Transmission: T56
Axle/Gears: 3.23
Re: WANTED kit for true duals!

Originally Posted by jerrod75110
you know if someone would put together a nice mandrel bent kit that had decent ground clearance could make some money on here.. I surprized some hasnt done it yet!
Count me in to purchase it. My 3 inch single sounds like Hell in a bad way
Reply
Old Aug 18, 2009 | 07:30 PM
  #15  
FlippindaBird's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Apr 2007
Posts: 773
Likes: 0
From: The Pocono Mountains, PA
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: WANTED kit for true duals!

now everyone is gettin my point
Reply
Old Aug 18, 2009 | 07:37 PM
  #16  
FlippindaBird's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Apr 2007
Posts: 773
Likes: 0
From: The Pocono Mountains, PA
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: WANTED kit for true duals!

all i can find is the lame dynomax kit which i mentioned for 170 that has both pipes exiting on the drivers side and has the mufflers side by side in the stock location... anyone finds that one with the true dual price list please PM me cause steph will get mad if u post it here, thanks
Reply
Old Aug 18, 2009 | 08:07 PM
  #17  
Stephen's Avatar
Banned
iTrader: (12)
 
Joined: Jul 1999
Posts: 12,212
Likes: 13
From: Bertram (outside Austin), TX
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: WANTED kit for true duals!

Originally Posted by FlippindaBird
all i can find is the lame dynomax kit which i mentioned for 170 that has both pipes exiting on the drivers side and has the mufflers side by side in the stock location... anyone finds that one with the true dual price list please PM me cause steph will get mad if u post it here, thanks
Don't act like I am some kind of bad guy. I just get tired of posting the same stuff over & over & over. BTW, I'm no chick, so "Steph" doesn't exactly work. How many guys do you call Steph?

You found the Dynomax kit I was referring to. That IS a true dual, just not on opposite sides of the car. I never said it was real good, only that it existed. Only that a true due kit existed. Don't get mad at me.

You want an opposite side dual kit? Those exist too. Just keep looking. I've seen them, just didn't keep them in my head, since a 3.5" single flows plenty, until you get well into a high horsepower level, than most street cars will ever see. And 1 muffler, 1 catalytic converter & 1 pipe, is lighter & cheaper.
Reply
Old Aug 19, 2009 | 02:50 PM
  #18  
Mudskunk's Avatar
Member
 
Joined: Aug 2009
Posts: 135
Likes: 1
From: SE WI
Car: 1989 Formula 350 / 2001 TA WS6
Engine: 350 / LS1
Transmission: Auto / Auto
Re: WANTED kit for true duals!

Originally Posted by FlippindaBird
i know this is probably illegal just about everywhere, but if i did everything legal id probably be bored as hell... anyway alot of these cars "3rd gens" are used as race cars anyway...
in wisconsin 3rd gens dont need smog inspection. i can actually completely ditch the catalytic converters if i wanted to. dont even have to have them safety inspected. just pay the registration fees for the plates each year or buy your collector plates. its about hte only benefit i can think of living in this liberal hell hole.
Reply
Old Aug 19, 2009 | 03:00 PM
  #19  
Stephen's Avatar
Banned
iTrader: (12)
 
Joined: Jul 1999
Posts: 12,212
Likes: 13
From: Bertram (outside Austin), TX
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: WANTED kit for true duals!

Originally Posted by Mudskunk
in wisconsin 3rd gens dont need smog inspection. i can actually completely ditch the catalytic converters if i wanted to. dont even have to have them safety inspected. just pay the registration fees for the plates each year or buy your collector plates. its about hte only benefit i can think of living in this liberal hell hole.
You might get away with doing that at inspection time, but it doesn't make it legal.

Emissions are a FEDERAL LAW, not a state law. That means, states can chose to expand further & complicate their laws even more, but federal laws make up the bare bones minimum that states are SUPPOSED to follow.
Reply
Old Aug 19, 2009 | 03:41 PM
  #20  
jerrod75110's Avatar
Member
 
Joined: Mar 2003
Posts: 185
Likes: 0
From: corsicana tx
Car: 89 camaro
Engine: 383
Transmission: 350 tci 3000 stall
Axle/Gears: 3.73
Re: WANTED kit for true duals!

who cares .. if it makes more power and sounds better!

Last edited by jerrod75110; Aug 19, 2009 at 03:48 PM.
Reply
Old Aug 24, 2009 | 10:08 AM
  #21  
FlippindaBird's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Apr 2007
Posts: 773
Likes: 0
From: The Pocono Mountains, PA
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: WANTED kit for true duals!

OK THEN STEPH NEXT QUESTION, WHEREABOUTS DO U FIND THE 3.5" KIT?
AND I ONLY TYPED STEPH CAUSE IT WAS QUICKER WASNT IMPLYING THAT YOU WERE B!T#HING LIKE A GIRL YA POST ****!
Reply
Old Aug 24, 2009 | 10:09 AM
  #22  
FlippindaBird's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Apr 2007
Posts: 773
Likes: 0
From: The Pocono Mountains, PA
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: WANTED kit for true duals!

LOL JUST KIDDIN STEPH
Reply
Old Aug 24, 2009 | 10:19 AM
  #23  
Stephen's Avatar
Banned
iTrader: (12)
 
Joined: Jul 1999
Posts: 12,212
Likes: 13
From: Bertram (outside Austin), TX
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: WANTED kit for true duals!

#1.....Turn off your all caps.

#2.....Nice "save" on your "Post ****" call out. Sorry if I have more time than you to post & still have a life. That's just the way it is. After about 12 years....Yes. I do have a lot of post.

#3.....I'm done trying to help you. I tried, you got insulting. No saving yourself now. Find what you want, on your own........
Reply
Old Aug 24, 2009 | 11:19 AM
  #24  
FlippindaBird's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Apr 2007
Posts: 773
Likes: 0
From: The Pocono Mountains, PA
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: WANTED kit for true duals!

"#2.....Nice "save" on your "Post ****" call out. Sorry if I have more time than you to post & still have a life. That's just the way it is. After about 12 years....Yes. I do have a lot of post."


Lol @ steph for being really angry with me... and you mistook my meaning of "post ****" i was referring to your unwillingness to post where to find the true dual kit, which sucks anyway lol thanks for all your really super help, youve been alot of fun, maybe you should take some time off from your life and your posting, sounds like your really stressed...
Reply
Old Aug 24, 2009 | 12:02 PM
  #25  
Stephen's Avatar
Banned
iTrader: (12)
 
Joined: Jul 1999
Posts: 12,212
Likes: 13
From: Bertram (outside Austin), TX
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: WANTED kit for true duals!

Originally Posted by FlippindaBird
"#2.....Nice "save" on your "Post ****" call out. Sorry if I have more time than you to post & still have a life. That's just the way it is. After about 12 years....Yes. I do have a lot of post."


Lol @ steph for being really angry with me... and you mistook my meaning of "post ****" i was referring to your unwillingness to post where to find the true dual kit, which sucks anyway lol thanks for all your really super help, youve been alot of fun, maybe you should take some time off from your life and your posting, sounds like your really stressed...
Only stress I get on TGO, is from the Newbies unwilling to find answers for themselves by use the "search: feature, that TGO provides. They want to be waited on hand & foot....Have things handed to them.

BTW...No sense in running a true dual anyways. A single large exhaust flows plenty & duals just add weight. Looking to SOUND fast, or BE fast?

If it were a track only car, then you wouldn't be looking for a kit in the first place. You'd do dumps or turn-outs & be done with it.
Reply
Old Aug 24, 2009 | 12:55 PM
  #26  
FlippindaBird's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Apr 2007
Posts: 773
Likes: 0
From: The Pocono Mountains, PA
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: WANTED kit for true duals!

actually not worried about the sound, reason i dont want dumps or turnouts is for looks... i asked about the 3.5" kit cause i thought it sounded like a good alternative didnt think about the weight in the first place but when you stated it, it made alot of sense... i never asked to be waited on and i was just voicing my opppinion i just didnt understand why you were so emotional about the whole thing, just relax... anyway, i searched for a 3.5 kit and cant find that either, thanks again and hope you have a good day
Reply
Old Oct 17, 2009 | 09:24 AM
  #27  
Jay's Avatar
Jay
Supreme Member
20 Year Member
iTrader: (2)
 
Joined: Nov 2000
Posts: 1,022
Likes: 0
From: Newington, CT
Car: 88 IROC
Engine: 5.7 RamJet
Transmission: T56
Axle/Gears: Dana44 4.10
Re: WANTED kit for true duals!

Originally Posted by FlippindaBird
anyway, i searched for a 3.5 kit and cant find that either, thanks again and hope you have a good day
http://www.mufflex-performance.com/fbody_1.html
Reply
Old Oct 17, 2009 | 09:41 AM
  #28  
FlippindaBird's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Apr 2007
Posts: 773
Likes: 0
From: The Pocono Mountains, PA
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: WANTED kit for true duals!

thx jay thats awesome a lil expensive tho
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MustangBeater20
TBI
11
Oct 29, 2022 09:20 PM
customblackbird
Suspension and Chassis
4
Aug 15, 2021 10:16 PM
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM
onefreakz
Exhaust
12
May 14, 2018 12:15 PM
86White_T/A305
LTX and LSX
0
Aug 17, 2015 12:16 AM




All times are GMT -5. The time now is 11:36 PM.