DaveZZ4

Looking for a hood, nose with the metal beam and plastic pieces that sit behind nose, passenger turn signal housing, fog light housings, and headlight covers for a 1986 Trans Am. Color doesn't matter (but if it's black that would help a lot) Can pick up (prefer within 150 miles of Chicago)
TIA

mantaguy

iTrader: (5)

What do you mean by this
nose with the metal beam and plastic pieces that sit behind nose

DaveZZ4

The nose is the front bumper cover.
There is a metal beam that sits behind the cover that attaches to the front of the frame and has hard plastic blocks attached to it. This makes up the structure for the front bumper. It is called a front bumper reinforcement assembly. Can be from any 1985 to 1990 F-body. Attached is a picture of the damage we are looking to repair.
Hope this helps.

mantaguy

iTrader: (5)

Gotcha,I have a set of turn signal housings and a new reconditioned front bumper cover (White) the shipping on the cover would be outrageous.

DaveZZ4

What would you want for the turn signal covers? Shipping to 60193.

Also for anyone else who may have parts, We are looking for parts numbered 2, 7 and 9 on the attached picture.

mantaguy

iTrader: (5)

Is this the reinforcement bar you are talking about?
http://www.hawksthirdgenparts.com/85...ment-bar-used/
I have one if interested.
Just saw your post above also have 3 and 4

DaveZZ4

The rest of the parts appear to be fine aside from the ones we are looking for.
We may need more, still removing the front bumper. The formed nuts on the plastic studs that attach the bumper cover to the fender are a pain. (LOL)

We should have it all apart today. If we need the other you have I will let you know.
Thanks.

dixie wrecked

iTrader: (6)

I have fog mounts and a turn signal, fogs from an 87, turn signal from an 87. My fogs work, but..barely lol. I think the glass over my pass side one is gone but I have the mounts for sure. I'm mounting KC'S anyway lol.
I also have a black headlight cover, pass side from the 85. I have a drivers side too, but I sat on the headlight once and..the rest is rock n roll history. Eh, its a parts car.
I have everything else as well, tho the nose I'm going to keep.
In southeast ks.

I have everything but the hood and nose, still on the car. Can't imagine shipping on the any of the large metal pieces being very nice

jez3941

iTrader: (1)

i have a front bumper $50
hood from a 84 TA if you are thinking of switching to that style $100
turn signal $10 ea
headlight cover $10 ea

and i might still have one fog light housing and a impact bar left ill have to check

i am in cudahy WI just south of milwaukee
i can give you a good bulk deal if you want to get several of these parts at once
to make your drive time worth while

DaveZZ4

If you look five posts up where I posted the exploded view, It turns out we need all those parts. We got the entire front end all apart now and the metal top panel is crushed on the passenger side as well. We were able to get the bumper mount on the frame straightened out fairly well. We want to stay with the 86 style with the vents. But we are very interested in the bumper. Looks like we will only need one fog lamp as the glass is cracked on it but the mounts survived. We will also need the passenger headlight bucket that hold the light as the passenger side one cracked at the pivot point.

Give me a list of what you have and a total price. We are down in schaumburg so the drive up that way isn't a problem.

jez3941

iTrader: (1)

Front bumper with part #3,4 & 6 need to be assembled
i dont have have the tray behind part#6, the piece the hood latch mounts to
RH turn signal
RH headlight bucket, with top cover but missing the headlight bezel
impact bar with plastic #7,8,9 no rust
$110 total

sorry i don't have any fog lights left
i can let you look around if there are any other screws or small trim pieces that you may need

dixie wrecked

iTrader: (6)

I have that metal piece the latch mounts to behind the nose.
The fogs I have work, but I think one or both glass pieces are broken/missing

TRANSAM82-92

iTrader: (1)

I have all the pieces you need
Front bumper cover $75
Re enforcement $50
Headlight assembly with Bezel $75
Hood $150 GTA with vents

I'm in Illinois NW Burbs
Let me know

I also have bumper covers that are refinished and primed ready to go $350 They are N.O.S bumpers no repops
PM with your # and I'll get in touch with you

Screamer86

Hi everyone just thought i would chime in and say Hi..
You all can call me Screamer everyone else does
I am the owner of the 86 TA dave has been talking about I am checking into finances and i will see what is possible to pickup..

Thanks to all of you who posted and offered parts you have.. AWESOME!!
Screamer

DaveZZ4

Sorry, been a busy week at work. I sent you a PM.
Thanks.

Screamer86

Hi all just wanted to stop in and make a post about Tansam82..
He is the Real deal if you need just about anything Trans Am he is the GUY!

He not only had what he advertized but even a couple other goodies I needed and he is a Great guy to Very knowledgeable about TA's I had a great transaction with him and look forward to doing more business with him...

Screamer