take a look at this fab job someone found
Thread Starter
Member
Joined: Jun 2006
Posts: 463
Likes: 9
From: Milford, OH
Car: 91 Z28 - using 87 electricals
Engine: 383 HSR EBL
Transmission: 700R4 - Stage 3 Fixed Pressure
Axle/Gears: GM 3.08 POSI
take a look at this fab job someone found
Member
Joined: May 2006
Posts: 161
Likes: 0
From: Fort Wayne, Indiana
Car: 1989 Camaro Iroc-Z
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 2.77 Posi
last time i saw a 3rd gen on a truck frame, it was parked in the back of a tralior park.....what do you expect....( nothing against people in mobile homes) but cmon, if you were looking for one of those, it would be the first place id go lookn'
Senior Member
iTrader: (1)
Joined: Mar 2005
Posts: 696
Likes: 0
From: Springfield,Mo
Car: 87 Berlinetta,work in progress
Engine: 468 BB,still in the build process
Transmission: TH350,3500 stall
Axle/Gears: 9" Ford,learning how to live under
OK,I'll get this out in the open,I'm from a VERY rural area,raised cattle and hogs growing up,and yes,I have chased chickens off of my car.I also used to be really big into 4x4s,I mudraced for 11 years.
BUT WHAT THE F*CK!!!!!!!!!!!!!
This goes back to what Jeff Foxworthy says,you CAN'T give a ******* money,cause' this is what they do with it!
BUT WHAT THE F*CK!!!!!!!!!!!!!
This goes back to what Jeff Foxworthy says,you CAN'T give a ******* money,cause' this is what they do with it!
Senior Member
iTrader: (1)
Joined: Mar 2005
Posts: 696
Likes: 0
From: Springfield,Mo
Car: 87 Berlinetta,work in progress
Engine: 468 BB,still in the build process
Transmission: TH350,3500 stall
Axle/Gears: 9" Ford,learning how to live under
Originally Posted by Stephen 87 IROC
I've seen lots of weird things put onto 4x4 frames including a Corvette.
I ran the snot out of that POS,until the trans puked,which was about when I got everything to put my truck back togethor.I stayed in the points that way,and ended up parting out that brain fart for about 4 times what I spent on it.It was a real crowd pleaser,too.I wish I had a scanner,I know I've got some old pictures of that clusterf*ck.
Junior Member
Joined: Aug 2003
Posts: 60
Likes: 0
From: San Antonio,Tx
Car: 91 Firebird Dark Green
Engine: 350 Victor Jr. 2V 2000 CFM TB EFI
Transmission: 700R4 BM 2500 stall
Axle/Gears: 3.73 Zexel torque sensing Posi
Damm! What a waste of time money and effort. This guy has way to much time on his hands. Did you notice there was no talk of it running or ever having moved under it's own power. So at best your buying a bunch of parts.
Still I'm sure someone will want and see it as a diamond in the ruff.
Still I'm sure someone will want and see it as a diamond in the ruff.
Trending Topics
Supreme Member
iTrader: (1)
Joined: Nov 2003
Posts: 1,598
Likes: 2
From: Davenport, Iowa
Car: Still a 3rd Gen
Engine: 450HP 355
Transmission: TH350
Axle/Gears: 9" with 4.11's
there is a local guy that's got a yellow RS on a truck frame... his looks MUCH better tho, he's got the nice dual shock setup, bigger rims and oh yah... his runs... lol
Not my cup of tea but meh... It would be fun to drive once or twice
Not my cup of tea but meh... It would be fun to drive once or twice
Member
Joined: Nov 2004
Posts: 349
Likes: 1
From: Earth, USA, Ga, Thomson
Car: 1985 Trans Am
Engine: 305 5.0 LG4
Transmission: 700-R4 Auto
Did anyone notice the Bernny dash, I wonder if it was a star wars package at one time. If i was to do a 4x4 camaro i do it better than that, and on a very basic camaro. Some of those Bernny parts get up there in price.
But like others said not my cup of tea.
Anyone notice he spelt camaro wrong, he even has the pictures to look at with Camaro on the fenders and the dash and still spells it wrong.
But like others said not my cup of tea.
Anyone notice he spelt camaro wrong, he even has the pictures to look at with Camaro on the fenders and the dash and still spells it wrong.
Member
Joined: Jan 2002
Posts: 182
Likes: 2
From: Ann Arbor,MI
Car: 1989 Trans Am GTA
Engine: LB9 TPI with L98 cam (Manual car)
Transmission: T5 5Speed/ 9bolt Borg-Warner 3.45 gears with posi
I want to say that Im seeing an 88 or so Tbird lower front bumper on that thing..
Joined: Dec 2000
Posts: 2,361
Likes: 2
From: Buffalo, NY
Car: 1984 Trans Am
Engine: LT1
Transmission: T56
Axle/Gears: 10 bolt w/ 4.10 gears
my favorite part is that it has a 3" or 4" cowl hood and the engine sits about a foot lower than it did stock!
Member
Joined: Oct 2005
Posts: 130
Likes: 0
From: South Carolina
Car: 89 RS
Engine: 350 5.7
Transmission: 700r4
I think it is ugly!!!! I have never seen a 85 with that kind of front end, what kind of Camaro is that? Yes, I still have some things to learn, don't laugh at me.
Member
iTrader: (10)
Joined: Apr 2006
Posts: 400
Likes: 0
From: Joliet IL
Car: 89 Camaro Convert,89 Camaro hardtop
Engine: 305 and a 357
Transmission: 700R4,T5
Axle/Gears: 4.10's and 3.43's
over in worth IL this guy owned a small car dealership and he had a delorean on one of those jacked up 4X4 frames
Supreme Member
Joined: Mar 2001
Posts: 2,262
Likes: 0
From: Renton, WA
Car: 1985 Camaro, 1986 Trans Am
Engine: 5.0L carbed and 5.0L TPI
Transmission: TH700R4
Axle/Gears: 3.23 and 3.27 posi
That Berl' looks like it was pretty well optioned from the factory. Too bad...
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
Around here somebody has a stretched cadillac limosine on a stretched truck frame, jacked up a mile. I like it. 
I'd never mess up a nice Camaro like that, but honestly, if I had another winter-ravished car and a blazer with a trashed body & good frame... yeah, I could see myself doing that.

I'd never mess up a nice Camaro like that, but honestly, if I had another winter-ravished car and a blazer with a trashed body & good frame... yeah, I could see myself doing that.
Member
Joined: Jul 2005
Posts: 132
Likes: 0
Car: 86 trans am
Engine: 350 cid from a 69 chevy truck
Transmission: original 700r4
It looks all fugged up >
but would be a cool idea to make the car an allwheel drive like some of the new inports. but to look as if nothing had ever been done to it.
think of instead of burning the reartires on takeoff you could burn all 4. with a 355 cid with around 450hp at the wheels.
but would be a cool idea to make the car an allwheel drive like some of the new inports. but to look as if nothing had ever been done to it.
think of instead of burning the reartires on takeoff you could burn all 4. with a 355 cid with around 450hp at the wheels.
Member
Joined: Mar 2006
Posts: 329
Likes: 0
Car: 1987 IROC 1991 RS
Engine: 5.7 TPI 5.0 TBI
Transmission: T-5 , 700R4
Axle/Gears: 2.73 twice
I just need to get a picture of the jacked up station wagon around my town. I bet the bumper is at LEAST 6ft high.
Kids, ready to go 4 wheelin the slopes, cross the river to go have a picnic??
Kids, ready to go 4 wheelin the slopes, cross the river to go have a picnic??
Supreme Member
Joined: Mar 2002
Posts: 4,812
Likes: 0
From: 62656
Car: 1991 S10 pickup 2700lbs
Engine: 4.3L Z TBI
Transmission: 700R4
Axle/Gears: 3.08 7.625"
Originally Posted by BRobinson
My father at his wierdest
but a third gen f body on a 4x4 chassis no.....
thats just retarded
Supreme Member
Joined: Mar 2002
Posts: 4,812
Likes: 0
From: 62656
Car: 1991 S10 pickup 2700lbs
Engine: 4.3L Z TBI
Transmission: 700R4
Axle/Gears: 3.08 7.625"
Originally Posted by markymarco
over in worth IL this guy owned a small car dealership and he had a delorean on one of those jacked up 4X4 frames
in IL, of course, why am i not surprised one bit
here of all places, where there is absolutely no where to even wheel a 4x4
looney toon ppl.
Joined: Dec 1999
Posts: 3,544
Likes: 19
From: WI,USA
Car: 89 FORMULA 350, 91 Z28 Convertible
Engine: ls1, LB9
Transmission: t56, Auto
Axle/Gears: S60/ 3.73
I won't even bother. but, I like how the grass would have been taller than the camaro
Last edited by 88 350 tpi formula; Aug 3, 2006 at 10:01 PM. Reason: car has a reserve?
Member
Joined: Dec 2005
Posts: 259
Likes: 1
From: Groves, TX
Car: 2001 SS
Engine: bolt on LS1
Transmission: 4L60E
Axle/Gears: 3.23
Banned
Joined: Sep 2005
Posts: 99
Likes: 0
From: York
Car: 84' z28
Engine: Built 350 SB 4 Bolt, Bored .30 Over
Transmission: 700r4
Axle/Gears: 3.42
Highest bid was $780... nice
I dont have a problem with it, just makes the price of my camaro go up in years to come
I dont have a problem with it, just makes the price of my camaro go up in years to come
Junior Member
Joined: Aug 2007
Posts: 6
Likes: 0
From: Willimantic, CT
Car: 1987 Camaro LT
Engine: 305 w/ A 4-bbl
Transmission: AOD
Axle/Gears: stock
Re: take a look at this fab job someone found
Yes, bright red, and running on tractor tires... kinda cool, in a "WTF I'd never do that myself, but since he did.." kinda way
The chick driving it got it about 5 feet off the ground at around 40, and almost flipped it.
----------
I was thinkin about doing this to a '79 'stang once on an '86 Bronco II chassis, but I figured the $$$ would be better spent on an autocross camaro
The chick driving it got it about 5 feet off the ground at around 40, and almost flipped it.
----------
Last edited by musewolfman; Aug 29, 2007 at 09:44 AM. Reason: Automerged Doublepost
Senior Member
Joined: May 2007
Posts: 365
Likes: 0
From: Central Michigan.
Car: 89' Camaro RS--
Engine: 305--
Transmission: Automatic
Axle/Gears: 2.73--
Re: take a look at this fab job someone found
Few miles down the road is a guy with a 69 Charger...Low the car.. well before the 44'' came... Now well i hate it.... However there is also a guy that lives someplace around here with a late 70's early 80's sometime Cadilac hearse... Massive lift... Has the pipes coming out the side with flame thrower exhaust on it...Coffin stuffed with subs.. Now that car i like.
Around here somebody has a stretched cadillac limosine on a stretched truck frame, jacked up a mile. I like it. 
I'd never mess up a nice Camaro like that, but honestly, if I had another winter-ravished car and a blazer with a trashed body & good frame... yeah, I could see myself doing that.

I'd never mess up a nice Camaro like that, but honestly, if I had another winter-ravished car and a blazer with a trashed body & good frame... yeah, I could see myself doing that.

Re: take a look at this fab job someone found
theres a guy near me with some old 70's el camino, its on a blazer frame with like 40 inch boggers on it...hes still trying to sell it, but that car actually kinda fits, i dunno about a camaro fitting it lol
Thread
Thread Starter
Forum
Replies
Last Post
tglennon11
Interior Parts Wanted
12
Sep 11, 2015 10:25 PM
rudolphschenker
Transmissions and Drivetrain
1
Sep 4, 2015 02:41 AM







Ever see a 4x4 Fiero?

