I have a problem and I am hoping that someone here can help. I have a 91 Camaro Z-28 convertible with the 305 TPI, auto, federal emissions. I am trying to get some repro underhood decals. Actually, the only two I know of that haven't survived are the ones under the hood on the hood itself, the emissions decal and the vacuum hose routing diagram.

I know Classic lists some of these decals but with no pic, I want to be sure I'm getting the right ones. The descriptions don't mention whether it's for TBI or TPI.

On that note, I also have a question regarding the anti-theft decals on the side windows that my car should have but does not any more. Does anyone know if the stickers mention just something to the effect of "vehicle protected by anti-theft system" or "vehicle AND audio system protected by anti-theft system"? A pic of an original would be great. I'd also love to know where I may be able to get two of these, as well.

I guess the other decal I'd like but will probably never find is the airbag decal that would go on the header trim (or headliner in a coupe) that is hidden by the driver's sunvisor when it is up. A nice pic of this would be cool to see as well.

Thank you for any help I hope to get in finding these things!

 

Some of the underhood decals were still available from the dealer a few years back. The window decals still were (I stocked up). The one on the headliner I'm pretty sure is discontinued.

I'm pretty sure the window decals only mention the radio with the Delco Loc radios. The rest just mention the anti-theft system on VATS cars.

Check http://osborn-reproduction.com for the decals. They have some of them. I'm sure there are other providers too.

 

Thanks for the site, looks good. But no pics of the decals being ordered. It seems everywhere is like this. How hard is it to just put up a small pic so I can see it and know its the right one?!?!?!

 

I bought the same emissions decal (DT0750) as you for my 91 GTA and its quality is very good. If you ever find a place that makes a reproduction interior airbag sticker let me know as I am looking for the same one.

 

I've got all the pics of my bone stock '89 IrocZ vert decals, stickers and emblems. Important for record keeping. I know it's not the same year, but I hope these help. I also have the 5.0L TPI.

PASS window decal . . .


Underhood emissions routing decal . . .


Underhood emission control decal . . .


Underhood "hood" VIN tag decal . . .

 

Damn those are clear! Get out there and take pics like that of all the markings on a 91 Formula 350TPI car for me.

 

very nice pics Iroc, thanks a bunch. Now you have made me more determined than ever to ge the stupid decals for this car LOL. I may get em from classic and just order all the ones for a 1991 5.0 since they are pretty cheap and then just sell the extra one on here.

 

Can someone out there with a 1991 Z28 with a 305 TPI PLEASE verify for me the three letter code in the upper left corner of the emissions decal? I think I finally found one, but of course, this place has no problem charging $10/sticker, but a BIG problem with posting a dang picture so I know its the right one. I can't verify the one on my car, because IT DONT HAVE IT ANYMORE!!!!!

BTW my car is federal emissions and not california.

 

Thank you Drew for that great link.

I need help from someone with a 1987 305 TPI though. All stickers had been previously removed. If you could send me the part numbers of all underhood stickers, I would greatly appreciate it!

 

It should be LLL.

 

Help!
I am going insane looking for a replacement drivers side decal on the window that says the following "Occupants of this vehicle are expected to wear seat belts" . It is a vinyl GM decal the passenger side one is pristine but the driver side is faded and the letters have rubbed off. Any help would be greatly appreciated. Please feel free to email me. Thanks

 

Can you take a picture???

I have never seen this decal to my recollection. I wonder if it was a regional thing, to where a Dealer would install it in certain states that mandated seat-belts... Like MI does now. I seem to remember Ford for years had "Buckle Up" or something like that on their windows... it had a picture of the buckle & strap on it.

 

I found a picture of the one Classic Industries is selling for 1991 Camaro. The description says 5.0e, this is for a Federal Emissions, but it may be for the TBI not TPI. Not sure if there is a difference. Also it has LAC at the top of decal.

http://www.rickscamaros.com/camaro-d...ions-1991.html

 

I would think that...
5.0E would indicate the TBI
5.0F would indicate TPI...

 

I am thinking of having some of these made up from my original. any interest?

 

I bought a new set of those from ebay a while back. I am still looking for the OCCUPANTS OF THIS VEHICLE ARE EXPECTED TO USE SEAT BELTS.

 

It looks like Osborn Reproduction changed to cjponyparts.com.

I emailed them to see if they have under the hood stickers for my 1988 IROC-Z. They don’t have any Camaro stuff anymore.

My original hood was damaged so I had a body shop replace it, but they failed to take the pristine stickers from the original hood (heat gun maybe?) and stick them on the new hood.

I have photos of the stickers but maybe lost on an old, dead laptop. I was planning to recreate them in Adobe Illustrator, with the correct fonts… then I would need to find a shop that can print them on the right material with the right adhesive…

IROCtopless, your photos are no longer showing here!

 

This thread is 11 years old, so some of the photo hosting sites are probably gone.

 

Hmmm....seems odd.

When you say you emailed "them"...is that cjponyparts?

It doesn't make sense to me (not saying it didn't happen) that a Ford/Mustang only parts operation like CJs would spend the money to buy Osbourne's, then discontinue half of their catalog. A quick DuckDuckGo search for Osbourne Reproductions returned several results.

https://duckduckgo.com/?t=ffab&q=osb...duction&ia=web

One of the results is for Osbourne products at Speedway motors. Looking at their page, they have many GM decals. So that's encouraging. No guarantee they still make the 3rd gen decal, but shows they have not morphed into a Ford/Mustang only supplier.

https://www.speedwaymotors.com/shop/...ctions~1-11360

Lastly, I see that Osbourne no longer has a website of their own. But they do have a facebook page. A lot of small businesses have gone to this model. You might try reaching out to them directly (if the "them" that you emailed was CJs).

https://www.facebook.com/sr281/

 

Thanks Dave! When I searched for Osborne Reproductions it came up with cjponyparts.com but I didn’t get a Facebook page in the search results for Jim, but then that’s Google.

Ill check out those links.

-tom