Stripping car, BBC
Thread Starter
Member
Joined: Jul 2003
Posts: 287
Likes: 0
From: Ottawa lk, MI, By Toledo, Oh
Car: 90 RS
Engine: 8 holes
Transmission: Quickest, quicker, quick...
Axle/Gears: 10 bolt, 3.73
Stripping car, BBC
The car caught fire in the engine, so all the interior is gone, and all the front end body parts.
7.5" rear end, aurburn or slp posi, 3.73 gears, 3000 miles on it, never style 28 spline axles, best short time was a 1.85 so it wasnt beat on really at all. Im lookin for around 300.
rear shocks and springs, like new, springs are cut to lower car. Make offer.
Hatch, window is black from smoke, should clean up with something I would imagine, make offer.
Tail lights, not to bad of condition, I dont know what they are going for either, so make offer.
Rear bumper with renforment, make offer.
A couple of ground effects, let me know what you want.
conversion driveshaft for turbo400 into 82-92 driveshaft, Thick steel, Im saying good to 800 hp. New u-joints, also will come with the mount need to put in the turbo 400 and a poly mount for torque arm. Lets start at 300 for it all.
Holly blue fuel pump, great shape, like new, 60$
Holly red, older, but works great, 50$
Full BBC exhuast, Headers banged up and the left side is a little warped, but it comes with full 3" exhuast all the way out the back with dual 3" mufflers, mostly all manderal bent. Exits in stock location. I am going to be taking offers because I know a exhuast like this can go for some $$$, and prefer to sell it locally.
Pm me and we can make a deal.
I am located in Toledo, Oh, 2 minutes from Michigan.
7.5" rear end, aurburn or slp posi, 3.73 gears, 3000 miles on it, never style 28 spline axles, best short time was a 1.85 so it wasnt beat on really at all. Im lookin for around 300.
rear shocks and springs, like new, springs are cut to lower car. Make offer.
Hatch, window is black from smoke, should clean up with something I would imagine, make offer.
Tail lights, not to bad of condition, I dont know what they are going for either, so make offer.
Rear bumper with renforment, make offer.
A couple of ground effects, let me know what you want.
conversion driveshaft for turbo400 into 82-92 driveshaft, Thick steel, Im saying good to 800 hp. New u-joints, also will come with the mount need to put in the turbo 400 and a poly mount for torque arm. Lets start at 300 for it all.
Holly blue fuel pump, great shape, like new, 60$
Holly red, older, but works great, 50$
Full BBC exhuast, Headers banged up and the left side is a little warped, but it comes with full 3" exhuast all the way out the back with dual 3" mufflers, mostly all manderal bent. Exits in stock location. I am going to be taking offers because I know a exhuast like this can go for some $$$, and prefer to sell it locally.
Pm me and we can make a deal.
I am located in Toledo, Oh, 2 minutes from Michigan.
Member
iTrader: (2)
Joined: May 2005
Posts: 334
Likes: 1
From: Palatine, IL
Car: 87 iroc
Engine: 454 .030 over
Transmission: th-350
Axle/Gears: 9 bolt
can u post pictures of the headers and exhaust? oir you can send them to billabongboy9123@yahoo.com , then pm me or email with what kinda price your lookin for them
Junior Member
Joined: Jan 2003
Posts: 75
Likes: 0
From: Detroit(Macomb)
Car: 1988 IROC
Engine: rebuilt 350
Transmission: 5-speed
Would your rear bumper cover and reinforcement be able to go onto my '88 Iroc? I know 91-92 rear bumpers are different than my '88, but if yours will fit than I'm interested.
Thread Starter
Member
Joined: Jul 2003
Posts: 287
Likes: 0
From: Ottawa lk, MI, By Toledo, Oh
Car: 90 RS
Engine: 8 holes
Transmission: Quickest, quicker, quick...
Axle/Gears: 10 bolt, 3.73
can u post pictures of the headers and exhaust? oir you can send them to billabongboy9123@yahoo.com , then pm me or email with what kinda price your lookin for them
Also, Yes, it should fit your 88 Iroc. Let me know what you want to do
Joined: Jan 2004
Posts: 1,761
Likes: 4
From: The "D"
Car: A Portly 85 Z28
Engine: 4.530 X 4.250 BBC
Transmission: under rated for this application
Axle/Gears: also under rated
The car caught fire in the engine, so all the interior is gone, and all the front end body parts.
what happened
Thread Starter
Member
Joined: Jul 2003
Posts: 287
Likes: 0
From: Ottawa lk, MI, By Toledo, Oh
Car: 90 RS
Engine: 8 holes
Transmission: Quickest, quicker, quick...
Axle/Gears: 10 bolt, 3.73
Ill have pictures of most things tonite.
Greeze, yeah, something in the engine compartment, who the hell knows. It sucks, but now I have a bigger project up my sleeve...
Trending Topics
Thread Starter
Member
Joined: Jul 2003
Posts: 287
Likes: 0
From: Ottawa lk, MI, By Toledo, Oh
Car: 90 RS
Engine: 8 holes
Transmission: Quickest, quicker, quick...
Axle/Gears: 10 bolt, 3.73
PM me with inquires...






Also have a 468 BBC that went low 12's, and was on a couple high 11's passes. Have slips somewhere to prove it. Im lookin for 1300 for it, intake to oil pan. No dist, or water pump.








Also have a 468 BBC that went low 12's, and was on a couple high 11's passes. Have slips somewhere to prove it. Im lookin for 1300 for it, intake to oil pan. No dist, or water pump.


Joined: Jan 2004
Posts: 1,761
Likes: 4
From: The "D"
Car: A Portly 85 Z28
Engine: 4.530 X 4.250 BBC
Transmission: under rated for this application
Axle/Gears: also under rated
That exhaust looks somewhat familar...aside from the muffler location!
I know there are a few guys looking for those used swap headers, a few have posted in response to me mentioning that I was going with Ed Quays this winter...I know these members were looking for low cost used ones...mw66nova,
xpndbl3 and Opher..he was the first to contact me on them. I`m ordering my new ones this week finally.
here`s the thread if you wanna review it...https://www.thirdgen.org/forums/orga...ggestions.html
I know there are a few guys looking for those used swap headers, a few have posted in response to me mentioning that I was going with Ed Quays this winter...I know these members were looking for low cost used ones...mw66nova, xpndbl3 and Opher..he was the first to contact me on them. I`m ordering my new ones this week finally.
here`s the thread if you wanna review it...https://www.thirdgen.org/forums/orga...ggestions.html
Junior Member
Joined: Apr 2005
Posts: 32
Likes: 0
From: North Branch, MI
Car: 1988 Chevrolet Camaro SPL
Engine: 350 Modified
Transmission: T-5 manual
Axle/Gears: Ford 9in - 3.50
Rearend interest..
Hey,
If you still got the rear end, I'd take it for $225 if you're willing to go that low.. holidays have got me pretty strapped. PM me if your interested...
If you still got the rear end, I'd take it for $225 if you're willing to go that low.. holidays have got me pretty strapped. PM me if your interested...
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
IROCZDAVE (88-L98)
Interior Parts for Sale
4
Oct 6, 2016 09:08 AM
kah992
Engine/Drivetrain/Suspension Parts for Sale
2
Aug 19, 2015 02:55 PM






