I'm looking for something in the 238-242 range on the intake and 245-252 on the exhaust, if you have something close let me know, looking to try out another cam for n/a purposes.

 

I have a comp cam part # 12-443-8 its 242 248 @.050 294 300 and .540 .562 lift with 1.5 rockers. I have the cam, springs pushrods and lifters for it. Its a reto roller cam. Thanks Terry

 

How much are you looking to get for the entire setup and how much just for the cam?

 

$500 for everything, the lifters alone cost that, or $175 for the cam or $200 for cam and springs. Thanks Terry

 

i have the xr282

check it out here in my sale add

https://www.thirdgen.org/techbb2/sho...hreadid=340352

im throwing in springs as well cuz i need it sold.

 

Part number for springs?

 

part number for the springs is 986-16 and they are comp also. Thanks Terry

 

Those springs are crap. 280 open pressure on a 600 lift 248* cam? No thanks.

 

Sorry to hear that you feel that way. Those are the springs that comp recomends for the cam. Thanks anyway Terry

 

How many times did you call comp back? I've talked to them before and can get 3-4 different answers to the same problem. Even when recommending parts. I'm running over 100# more than you w/ less lift on my cam.

I'm not saying that I'm not interested in the cam though, it sounds very nice. Didn't mean to come off like a dick, but that cam needs more spring.

 

I belive their catalogues say thats the spring that matches the cam, however they have a premium spring always listed as well which is part number 987-16

 

Those are the springs that I'm running now.

 

Thats what i was saying also, the cam card I have with that cam recommends 986-16. Thanks Terry

 

terry; check y0 pm's.