Offering up for sale an assortment of 3D Printed parts I had to reverse-engineer to complete my doors. As far as I could tell, these items have been discontinued by GM, without an aftermarket provider. Have stock and can make-to-order pretty quickly. Paypal preferred. Shipping not included in the quoted pricing. Feel free to PM me with any questions or to discuss shipping if you're interested in buying.

GM Part #: 20562754
Description: Window Bushing
Material: ABS, Zinc Plated Steel
Per Car Required: 8 (4x each door)
Price: $3.00/each




GM Part #: 20216825
Description: Front Up Stop
Material: ABS
Per Car Required: 2 (1x each door)
Price: $4.75/each




GM Part #: 20096585
Description: Window Retainer
Material: ABS
Per Car Required: 8 (4x each door)
Price: $1.00/each




GM Part #: 10051002
Description: Rod Retainer
Material: PETG
Per Car Required: 2 (1x each door)
Price: $1.00/each


Installed Photos Follow:

 

How much for shipping for all items to zip code 78660? I added up $43.50 in parts.

I am gussing all parts can fit in a small padded envelope or small box.

Thanks

Manny

 

Yep, parts would comfortably fit in a small box or padded envelope. Parts are shipping from Mulberry, FL (33860), rates look like:

USPS: $8.45 (small box flat rate, 1-3 business days delivery)
UPS: $9.65 (Ground, 2 business days transit) or $33.25 (Next Day Air)
Fed Ex: $12.65 (Express, ~3 business days), $26.60 (2Day), $72.50 (! Overnight)

Thank you for your interest! Let me know if you need any more info.

 

Might be interested in complete set as well.

 

Might be interested in complete set as well.

 

@Benc1 @BOOBYE - Already more interest than I expected to get, lol. I have one complete set ready to ship, and about half of set #2. Should be done printing set #2 later today. Takes about a day for a full set, so I'll keep it rolling. If you want to proceed, feel free to PM, and thank you for your interest.

Additional photos of the parts actually secured to the sash channel (factory 1/4" peel rivets) in the door with the window up:


Side note: not sure if anyone needs them, mine didn't need replacing, but I do have the little round guides designed as well. They'd be $0.50/each, but I haven't given them a full test yet:

 

Ill take first set

 

First set claimed, PM sent @topduarte . Second set will be done this evening. Thank you!

 

Sent PM

 

Replied @Benc1 , thank you!

 

I just bought some up stops, but I could use the rest just in case. ....if you're just doing complete sets, which I understand, I'll just order the whole set.

 

I'm honored. I'd be happy to sell individual parts - PM sent. If I may ask though, where did you manage to find the up stops? I couldn't find one short of a junkyard. This whole 3D Printing Experiment never would have happened if I located one, lol.

 

Got all 20 parts today and very happy.

Well packaged.

Thanks.

Manny

 

Thank you for the kind words, @topduarte ! Couple new sets printed and unclaimed, if anyone else is looking and interested. I made up an installation guide as well (thank you @Abubaca !) - see attached PDF.

 

Sending a PM for everything you are making including the design you have showing above.

 

@DontBlnkBadWolf Replied to PM - thank you!

 

Very cool. May need when I get to that stage of my build.

 

I'll take a complete set....

 

@fishermandude PM sent, thank you! For reference, below is a picture of everything that comes in a complete kit:

 

I will take a complete set. you can send a paypal request to iragibson0@gmail.com

 

@Gibby10 Sent, thank you!

 

sorry just got the notification on my paypal. paid!

 

This still going on?

I am looking at my door and my parts look a bit different.

What year were the examples pics from?