can anyone burn me a chip for the camaro? I got the cash.. just need someone with the knowledge/tools to do it... and i dont want to go with a stage 1/2 chip off the shelf.. i want it done right.. let me know if you can help!!

 

What mods do you have? engine size? TBI or TPI?

 

Headers, cutout, flowmaster 40 series, K&N open element, some of the ultimate TBI stuff..

 

TBI? Ewwww.

 

HEY TBI is okay .

I could probably make one for ya, i use 29c256 chips 28 pin not the 24pin, youd have to get yourself and adapter which is like $30 and the chips are $6 which are reuseable many times. unless you wanna use the one time only (stock) chips which i have no idea where to buy them. kinda a waste of $

youve got an Automatic as well.......hmmm ill have to read up on autos though...

just curious, have you got an afpr?

 

The only useful thing to edit on an automatic is the torque convertor lockup MPH.

 

neg. the hole air/fuel curve redone *according to Pro Dyno* gives 10% hp/tq increase just in that alone.

 

That's a curve, you can do that with a manual. I'm talking automatic specific options.

 

how much for a chip for a 91z w/ a stick n a few mods... and then in a few months,id need a chip for a 383 stroker, but thats later.

 

im sure there is someone else on the SW board who knows TPI, because i sure dont.

its a hobby (my weekends), i have no plans of making $ off any of it. Local only

 

well anybody????

 

To make a chip the right way, isn't a one day deal. When I tuned my stealth ram, I burned 7 chips over 4 days.

 

howmuch u charge to do it?

 

I think I have a Moates adapter for using 29C256 proms in the TBI ECM. Gotta look though. Email me if interested.

I can do chips too, but it's been a couple years, so I'm rusty.

 

You have the adapter or the burner?

 

Yes. both

 

Would there be much benifit for me to get you guys to burn me a chip if i have virtualy no mods dont to the motor?

 

Are you looking to sell the adapter and burner?

 

Ryan,

To answer your question, there would be pretty much no point to burning a chip when you have no mods. The stock chip is best for an unmodded engine.

 

matt3383
i never said that, you know i have mods to my car

 

But the mods you have don't require a new chip.

 

Have any of you LO3 lover's seen the september issue of chevy high performance? they have this 91 camaro with vortec haeds gears intake chip and some other **** and it was pull like 300 hp. why don't one of you LO3 loven ****'s mimic that setup? it would be pretty cool to se what that setup could do on the street.

 

PM sent

 

I saw that setup in the magazine. Problem is I already had my heads and cam done by the time the article came out. I have TPI heads with an L98 cam and a killer exhaust. When I get the intake and tuning all done, I would hope to make @ 250hp.

Despite the high horse power number they say they are getting in the magazine, they are having some bad tuning problems below 3000 rpm. Just about the same place I am right now.

 

that article is on the tbi board. ShiftyCapone even got his article in the magazine theres a clip of it here.link to thread