What manufactures make perfect-fit, braided lines for our cars?

JameS

------------------

 

Russell makes a nice 5 line kit. The ones in the rear fit perfect but I didn't use the fronts bc the Baer kit came with lines.

------------------
1991 Z28, minirammed 383, Baer Track kit and a few other goodies...stay tuned.

 

I have the Russel lines in the front and back and they make a big difference. Before the lines were installed, the car would pull to the right upon braking. Now it stops in a straight line and the pedal is a lot firmer.

Hope this helps

Steve

 

Steve,

Are the Russell lines a perfect fit? If so, where can I purchase them?

Thanks,

JamesC

------------------

 

5 lines??

My Russell kit came with the two front lines, plus the splitter block that attaches to the rear axle. The rear caliper lines, the ones about 3 inches long, did not come in the kit.

------------------
FORMULA 350 TK
Southern California 3rd Generation F-Body Organization©

 

Tom, my bad. I got the Russell 3 line kit and bought the rears (caliper lines) seperate from Baer. Man, it's been a long time since then!

 

Earls sells a complete kit.

------------------
86Z28, GM 350, Jet perf Q-jet & chip Dual snorkel air cleaner, Edelbrock performer intake, Edelbrock headers, Edelbrock cat-back, Off road pipe, MSD 6AL, Accel Super Coil, Taylor Spiro-pro wires, Rapid fire plugs, Jet fan switch, World class t-5, Hurst Short Throw Shifter, Ram Flywheel, Center force dual friction clutch,Aluminum drive shaft, BW disc rear 3.45's & a posi, PBR calipers, Earls braided brake lines, Polygrapite bushings all the way around, poly tranny mount & torque arm mount, Hotchkis lower control arms & panhard rod, Rancho limiter straps, KYB struts & shocks, Gm Wonderbar, Edelbrock strut tower brace, SSM sub frame connectors, Jamex lowering springs, Carbon metallic brake pads, Crossed drilled rotors, Mobil 1 Tranny fluid & motor oil, GM syntheic rear end oil, K&N, Grant stering wheel, 1,200 watt system, Jet Black Paint, 91 Z28 rims, 92 wing, Tinted windows.

 

JeffT, no prob. So, Baer carries those short lines? Cool, I want some. Do you remeber part #'s? If not no biggies, I can call them.

Same for you BLACKZ, you got any part numbers for the rear lines? Thanks guys!

------------------
FORMULA 350 TK
Southern California 3rd Generation F-Body Organization©

[This message has been edited by Tom Keliher (edited October 03, 2000).]

 

BlackZ,

Where can I purchase Earls lines? Website? Catalogue? About what is the cost per set?

Thanks,

JamesC

------------------

 

I forgot the part number, But I found that some guy buy the name of sam works there and he was a great help,1-317-241-0318,


------------------
86Z28, GM 350, Jet perf Q-jet & chip Dual snorkel air cleaner, Edelbrock performer intake, Edelbrock headers, Edelbrock cat-back, Off road pipe, MSD 6AL, Accel Super Coil, Taylor Spiro-pro wires, Rapid fire plugs, Jet fan switch, World class t-5, Hurst Short Throw Shifter, Ram Flywheel, Center force dual friction clutch,Aluminum drive shaft, BW disc rear 3.45's & a posi, PBR calipers, Earls braided brake lines, Polygrapite bushings all the way around, poly tranny mount & torque arm mount, Hotchkis lower control arms & panhard rod, Rancho limiter straps, KYB struts & shocks, Gm Wonderbar, Edelbrock strut tower brace, SSM sub frame connectors, Jamex lowering springs, Carbon metallic brake pads, Crossed drilled rotors, Mobil 1 Tranny fluid & motor oil, GM syntheic rear end oil, K&N, Grant stering wheel, 1,200 watt system, Jet Black Paint, 91 Z28 rims, 92 wing, Tinted windows.