Mac sfc's install problems
#1
Senior Member
Thread Starter
Join Date: Dec 2000
Location: Mission Viejo, CA
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
Mac sfc's install problems
I bought a set of sfc from Mac (weld on) and went to have them installed the other day and the guy said that the cat was in the way and I would either have to get a smaller one or move it. Has anyone else had this problem? If so how did you get around it? Thanks
Jim
Jim
#3
Member
Join Date: Jul 1999
Location: Saugerties, NY, USA
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula
Engine: 355 TPI
Transmission: T56
Axle/Gears: 3.70 9 bolt.
Got MAC's on the GTA. My weldin' fool buddy hated them compared to the Alston's on the chicken.
I don't really have any exhaust issues to comment on as we put them on while the cats and exhaust were off anyhow. No, they don't really hit anything but my weldin' fool buddy hated the cheapo mounting pads... he figures they'll break off and take a piece of subframe with them if they're beat on severly. Had to take off the cat to get the alston's on also.
------------------
'89 Formula - Thunderchicken - 355 Vette L98/T-5/3.45 9-bolt/black/t-tops - the fun car!
'90 GTA - The GTA - 5.0 LB9/TH700/3.27 9-bolt/black/t-tops/tan leather - the cruiser.
I don't really have any exhaust issues to comment on as we put them on while the cats and exhaust were off anyhow. No, they don't really hit anything but my weldin' fool buddy hated the cheapo mounting pads... he figures they'll break off and take a piece of subframe with them if they're beat on severly. Had to take off the cat to get the alston's on also.
------------------
'89 Formula - Thunderchicken - 355 Vette L98/T-5/3.45 9-bolt/black/t-tops - the fun car!
'90 GTA - The GTA - 5.0 LB9/TH700/3.27 9-bolt/black/t-tops/tan leather - the cruiser.
#4
Junior Member
Join Date: Aug 1999
Location: Metairie, LA. USA
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 Firebird
Engine: '89 Corvette L98, unstock
Transmission: 700R4
Axle/Gears: 3.23 posi
I was at a freinds racecar shop while he was installing a set on a 91 Z28. It didn't have cats, so that wasn't a problem, but the mounting tabs fit like crap. He had to cut off both the front ones and reposition them to fit right before installing them.
------------------
Redbird
Bayou Motorsports
87 Firebird-Daily Driver/Autocrosser
84 Z28-Full bore Autocross car
Delta Region SCCA
#00 C Prepared
------------------
Redbird
Bayou Motorsports
87 Firebird-Daily Driver/Autocrosser
84 Z28-Full bore Autocross car
Delta Region SCCA
#00 C Prepared
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
08-20-2017 12:16 AM