Good Engine Rebuild Kits?
Thread Starter
Member
Joined: May 2002
Posts: 432
Likes: 0
From: SE Pennsylvania
Car: 1986 Trans Am
Engine: 350 W/Plenty of Mods
Transmission: T5
Good Engine Rebuild Kits?
Hey guys, I fried the piston rings in my 350 crate engine (ran SBC spark plugs on my vortec heads by accident... didn't know there was a difference till it was all but too late 
) and as a result of the fried rings, I got alot lower on oil than I thought and spun a bearing (lots o metal in the pan 
). I'm attending Automotive Training Center right now, and after I take the engine performance class I'm going to rebuild the enigne, but I was wondering if you guys know of any good 350 rebuild kits out there that I could look for. I havn't been able to really find any. Thanks for any help.
) and as a result of the fried rings, I got alot lower on oil than I thought and spun a bearing (lots o metal in the pan ). I'm attending Automotive Training Center right now, and after I take the engine performance class I'm going to rebuild the enigne, but I was wondering if you guys know of any good 350 rebuild kits out there that I could look for. I havn't been able to really find any. Thanks for any help. 
Supreme Member
Joined: Apr 2001
Posts: 4,969
Likes: 0
From: USA
Car: yy wife, crazy.
Engine: 350, Vortecs, 650DP
Transmission: TH-350
Axle/Gears: 8.5", 3.42
www.pawinc.com
www.northernautoparts.com
www.competitionproducts.com
www.summitracing.com
www.flatlanderracing.com
www.enginekits.com
www.sdpc2000.com
www.paceperformance.com
That's all I can remember right now.
www.northernautoparts.com
www.competitionproducts.com
www.summitracing.com
www.flatlanderracing.com
www.enginekits.com
www.sdpc2000.com
www.paceperformance.com
That's all I can remember right now.
Thread Starter
Member
Joined: May 2002
Posts: 432
Likes: 0
From: SE Pennsylvania
Car: 1986 Trans Am
Engine: 350 W/Plenty of Mods
Transmission: T5
Since I only have $2.00 in my checking acct right now and can't order a pawinc catalog, any of you guys remember how much their rebuild kit cost and what it included?? Thanks for all the sites too.
Supreme Member
iTrader: (2)
Joined: Jun 2001
Posts: 1,878
Likes: 0
From: northeast ohio
Car: 2000 astro
Engine: 4.3
Transmission: A4
Axle/Gears: 7.5 with 3.42 gears
paw sells rebuild kits dirt cheap.
they should have listings on their website, and the most recent catalog i have is 2001.
their rebuild kits are around $200 i think? just a wild guess.
they should have listings on their website, and the most recent catalog i have is 2001.
their rebuild kits are around $200 i think? just a wild guess.
Trending Topics
Supreme Member
Joined: Apr 2001
Posts: 4,969
Likes: 0
From: USA
Car: yy wife, crazy.
Engine: 350, Vortecs, 650DP
Transmission: TH-350
Axle/Gears: 8.5", 3.42
Powerhouse ( www.enginekits.com ) has a basic rebuild kit for $154, but it's for a 2pc rear main seal block that's got a carb sitting on it. Same with Northern Auto Parts.
You don't need a catalog for PAW. Pick up any CHP, Car Craft, or Hot Rod magazine and they have a 2 page add in there.
You don't need a catalog for PAW. Pick up any CHP, Car Craft, or Hot Rod magazine and they have a 2 page add in there.
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Engine/Drivetrain/Suspension Parts for Sale
2
Dec 11, 2023 08:14 AM
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM
