Pictures of Yarnboy's IROC
Pictures of Yarnboy's IROC
http://63.80.86.186/irocyard.jpg -- Ignore the solid inch thick layer of brake dust on my front wheels..
http://63.80.86.186/carwash.jpg --This is what my car looks like clean..I wish my wheels would stay that shiny dry though..heh
http://63.80.86.186/305tpi.jpg --This is my engine when it is fairly dirty..See anything broken? heh
I know it is ugly with the bra on but the paint is terrible underneath. Don't make too much fun..seeya
------------------
-Red '88 IROC 5 Speed 305 TPI w/3.08
-Dual Friction Centerforce Clutch
-Accel 300+ Racing Ignition
-Accel 300+ Pro Sleeve Plug Wires
-Accel U-Groove Plugs
-Flowmaster Force II 3 Chamber Cat Back Exhaust
-Hypertech Chip
-Hypertech Airfoil
-Removed, Then Re-installed (out of fear) MAF Screens
-Gutted Air Box
-Best E/T 14.90, 60 ft. 2.17, 1/8th mile 9.61(bald tires, Code's 34,36)
-Best MPH 92.7(bald tires)
[This message has been edited by Yarnboy (edited November 17, 2000).]
http://63.80.86.186/carwash.jpg --This is what my car looks like clean..I wish my wheels would stay that shiny dry though..heh
http://63.80.86.186/305tpi.jpg --This is my engine when it is fairly dirty..See anything broken? heh
I know it is ugly with the bra on but the paint is terrible underneath. Don't make too much fun..seeya
------------------
-Red '88 IROC 5 Speed 305 TPI w/3.08
-Dual Friction Centerforce Clutch
-Accel 300+ Racing Ignition
-Accel 300+ Pro Sleeve Plug Wires
-Accel U-Groove Plugs
-Flowmaster Force II 3 Chamber Cat Back Exhaust
-Hypertech Chip
-Hypertech Airfoil
-Removed, Then Re-installed (out of fear) MAF Screens
-Gutted Air Box
-Best E/T 14.90, 60 ft. 2.17, 1/8th mile 9.61(bald tires, Code's 34,36)
-Best MPH 92.7(bald tires)
[This message has been edited by Yarnboy (edited November 17, 2000).]
Yea I know, I feel bad doing a fake tech post..did you notice my weak attempt at making somewhat "tech"?
"See anything broken?" That makes it tech in my mind. Thanks for the compliments though
------------------
-Red '88 IROC 5 Speed 305 TPI w/3.08
-Dual Friction Centerforce Clutch
-Accel 300+ Racing Ignition
-Accel 300+ Pro Sleeve Plug Wires
-Accel U-Groove Plugs
-Flowmaster Force II 3 Chamber Cat Back Exhaust
-Hypertech Chip
-Hypertech Airfoil
-Removed, Then Re-installed (out of fear) MAF Screens
-Gutted Air Box
-Best E/T 14.90, 60 ft. 2.17, 1/8th mile 9.61(bald tires, Code's 34,36)
-Best MPH 92.7(bald tires)
"See anything broken?" That makes it tech in my mind. Thanks for the compliments though
------------------
-Red '88 IROC 5 Speed 305 TPI w/3.08
-Dual Friction Centerforce Clutch
-Accel 300+ Racing Ignition
-Accel 300+ Pro Sleeve Plug Wires
-Accel U-Groove Plugs
-Flowmaster Force II 3 Chamber Cat Back Exhaust
-Hypertech Chip
-Hypertech Airfoil
-Removed, Then Re-installed (out of fear) MAF Screens
-Gutted Air Box
-Best E/T 14.90, 60 ft. 2.17, 1/8th mile 9.61(bald tires, Code's 34,36)
-Best MPH 92.7(bald tires)
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
Well here's some tech- that's a 300 box on the firewall, eh? Did you have a vacuum reservoir there, and if so, where did you put it? (That's where mine is on my '86 Firebird, looks like a rectangle.) Or did you have that circle-shaped one?
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
Technically speaking, I don't know. I bought it with all the mods I have aside from a few. Sorry..Good question though..Now you made me curious..
------------------
-Red '88 IROC 5 Speed 305 TPI w/3.08
-Dual Friction Centerforce Clutch
-Accel 300+ Racing Ignition
-Accel 300+ Pro Sleeve Plug Wires
-Accel U-Groove Plugs
-Flowmaster Force II 3 Chamber Cat Back Exhaust
-Hypertech Chip
-Hypertech Airfoil
-Removed, Then Re-installed (out of fear) MAF Screens
-Gutted Air Box
-Best E/T 14.90, 60 ft. 2.17, 1/8th mile 9.61(bald tires, Code's 34,36)
-Best MPH 92.7(bald tires)
------------------
-Red '88 IROC 5 Speed 305 TPI w/3.08
-Dual Friction Centerforce Clutch
-Accel 300+ Racing Ignition
-Accel 300+ Pro Sleeve Plug Wires
-Accel U-Groove Plugs
-Flowmaster Force II 3 Chamber Cat Back Exhaust
-Hypertech Chip
-Hypertech Airfoil
-Removed, Then Re-installed (out of fear) MAF Screens
-Gutted Air Box
-Best E/T 14.90, 60 ft. 2.17, 1/8th mile 9.61(bald tires, Code's 34,36)
-Best MPH 92.7(bald tires)
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
I asked because that's a good spot for your box. I had to remove my coolant reservoir (and replace it with a tiny plastic aftermarket one) to mount my MSD. Nice car by the way! That doesn't look like a dirty engine bay at all.------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
Trending Topics
Joined: Jul 1999
Posts: 1,272
Likes: 2
From: Muskego, WI
Car: 1985 Trans Am
Engine: 350
Transmission: T5
Axle/Gears: 3.70
Thread
Thread Starter
Forum
Replies
Last Post
Linson
Auto Detailing and Appearance
40
Aug 21, 2015 02:12 PM
NufNuffZ28
History / Originality
2
Aug 14, 2015 09:12 AM
mustangman65_79
Body
3
Aug 11, 2015 03:17 PM





