engine seal
Thread Starter
Junior Member
Joined: Feb 2005
Posts: 58
Likes: 0
Car: 1989 Pontiac Firebird
Engine: 2.8L V6
Transmission: auto
engine seal
does it really work? the stuff that you put in your radiator after you flush it, to seal head gaskets, i used one bottle, and the smoke stopped a little bit, should i add another bottle?
Supreme Member
Joined: Aug 2004
Posts: 4,168
Likes: 3
From: Marietta, GA
Car: '91 Firebird Convertible
Engine: 305 TBI (LO3)
Transmission: 700r4, Vette Servo
Axle/Gears: 3.27 9 Bolt, PBR disks
Re: engine seal
Originally posted by fearfactory17
does it really work? the stuff that you put in your radiator after you flush it, to seal head gaskets, i used one bottle, and the smoke stopped a little bit, should i add another bottle?
does it really work? the stuff that you put in your radiator after you flush it, to seal head gaskets, i used one bottle, and the smoke stopped a little bit, should i add another bottle?
If there is a problem its been my experience that there is not a liquid in the world that will fix it.
What are the symptoms that led you to use this in the first place?
Thread Starter
Junior Member
Joined: Feb 2005
Posts: 58
Likes: 0
Car: 1989 Pontiac Firebird
Engine: 2.8L V6
Transmission: auto
blowh head gasket, my car shouts out alot of white smoke, and water drips from the tailpipes, i figured giving that engine seal a try might help, but guess not, i guess im going to have to replace the head gaskets
Senior Member
Joined: Nov 2003
Posts: 953
Likes: 0
From: Waterloo, Iowa
Car: 1992 Camaro RS 25th Aniversarry Edition
Engine: 305
Transmission: TH-700-R4
Axle/Gears: 10 bolt with 3.23's and SLP Posi.
i wouldnt use that as it can actually end up cloging the cooling system.
get a nice set of Fel-Pro PermaSeal head gaskets.
get a nice set of Fel-Pro PermaSeal head gaskets.
Thread
Thread Starter
Forum
Replies
Last Post
