Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Where does neg battery cable bolt to?

Thread Tools
 
Search this Thread
 
Old Mar 17, 2009 | 11:52 PM
  #1  
89RsPower!'s Avatar
Thread Starter
Supreme Member
 
Joined: Apr 2002
Posts: 3,552
Likes: 5
From: New Jersey
Car: 86 Corvette, 89 IROC, 1999 TA
Engine: 350, 350, LS1
Transmission: 700r4, 700r4, T-56
Axle/Gears: 3.07, 373, 4.10
Where does neg battery cable bolt to?

Where does the negative battery cable bolt to? 89 IROC L98..
Reply
Old Mar 17, 2009 | 11:57 PM
  #2  
Ca[maro]88's Avatar
Senior Member
iTrader: (2)
 
Joined: Dec 2008
Posts: 990
Likes: 1
From: Peoria, IL
Car: 1988 Camaro Sport Coupe
Engine: 5.0 305 Carb'd
Transmission: 700R4
Axle/Gears: 3.23
Re: Where does neg battery cable bolt to?

your battery and the other side goes to your frame rail.
Reply
Old Mar 18, 2009 | 12:26 AM
  #3  
crytical point's Avatar
Senior Member
 
Joined: Feb 2008
Posts: 441
Likes: 0
From: Sanford, FL
Car: 92 RS Camaro
Engine: 305 TBI
Transmission: T5
Axle/Gears: 3.08
Re: Where does neg battery cable bolt to?

From the battery to the body then if you want add another from the same body location to your engine.

You won't regret it!
Reply
Old Mar 18, 2009 | 12:32 AM
  #4  
Ca[maro]88's Avatar
Senior Member
iTrader: (2)
 
Joined: Dec 2008
Posts: 990
Likes: 1
From: Peoria, IL
Car: 1988 Camaro Sport Coupe
Engine: 5.0 305 Carb'd
Transmission: 700R4
Axle/Gears: 3.23
Re: Where does neg battery cable bolt to?

yeah i put one from the battery cable to the engine behind the a/c compressor bracket.
Reply
Old Mar 18, 2009 | 01:16 PM
  #5  
89RsPower!'s Avatar
Thread Starter
Supreme Member
 
Joined: Apr 2002
Posts: 3,552
Likes: 5
From: New Jersey
Car: 86 Corvette, 89 IROC, 1999 TA
Engine: 350, 350, LS1
Transmission: 700r4, 700r4, T-56
Axle/Gears: 3.07, 373, 4.10
Re: Where does neg battery cable bolt to?

Originally Posted by crytical point
From the battery to the body then if you want add another from the same body location to your engine.

You won't regret it!
Yeah already have it grounded to the rail, couldn't remember if it had a ground on the block or not too, pulled the engine a year ago..
Reply
Old Mar 18, 2009 | 03:13 PM
  #6  
five7kid's Avatar
Moderator
25 Year Member
iTrader: (14)
 
Joined: Mar 2000
Posts: 43,187
Likes: 43
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
The large negative cable goes to the engine block somewhere - varies from model to model, engine to engine, and doesn't really matter. Mine bolts to the alternator bracket. Going directly to the engine makes sense since the starter is the biggest amperage draw of any part of the electrical system (unless you have a mighty big subwolfer amp ).

A small wire goes to the chassis. That's just to make sure you have some ground to the rest of the accessories. My '57 didn't even have that.
Reply
Old Mar 18, 2009 | 03:51 PM
  #7  
50bmgshooter's Avatar
Senior Member
iTrader: (4)
 
Joined: Oct 2008
Posts: 271
Likes: 0
Re: Where does neg battery cable bolt to?

you better make sure that you have a ground from the motor to ground if not your dizzy and alt will try to find a ground.
I have seen throttle cables burn off because of no ground strap.
Reply
Old Mar 19, 2009 | 08:30 AM
  #8  
89RsPower!'s Avatar
Thread Starter
Supreme Member
 
Joined: Apr 2002
Posts: 3,552
Likes: 5
From: New Jersey
Car: 86 Corvette, 89 IROC, 1999 TA
Engine: 350, 350, LS1
Transmission: 700r4, 700r4, T-56
Axle/Gears: 3.07, 373, 4.10
Re: Where does neg battery cable bolt to?

Originally Posted by 50bmgshooter
you better make sure that you have a ground from the motor to ground if not your dizzy and alt will try to find a ground.
I have seen throttle cables burn off because of no ground strap.
Yeah factory ground strap is on, the grounds 2 the back of the heads r on, just wanted to know where on the block the factory put the end of the neg cable, I know it really doesn't matter ground wise, just trying to put everything back as it was. I guess I'll just attach it where ever it reaches to..
Reply
Old Mar 19, 2009 | 08:32 PM
  #9  
Supervisor42's Avatar
Supreme Member
 
Joined: Jul 2005
Posts: 1,675
Likes: 3
From: Arab, Alabama
Car: 1988 Trans Am GTA
Engine: 350 4BBL
Transmission: 700R4
Axle/Gears: 3.27
Re: Where does neg battery cable bolt to?

On my '88 it is connected to the exhaust manifold stud shown below. The manifold is bolted on with the stud and then the P/S brace (removed for clarity) then the ground cable, then the nut.
Attached Thumbnails Where does neg battery cable bolt to?-100_0239_e2.jpg  
Reply
Old Mar 19, 2009 | 10:13 PM
  #10  
89RsPower!'s Avatar
Thread Starter
Supreme Member
 
Joined: Apr 2002
Posts: 3,552
Likes: 5
From: New Jersey
Car: 86 Corvette, 89 IROC, 1999 TA
Engine: 350, 350, LS1
Transmission: 700r4, 700r4, T-56
Axle/Gears: 3.07, 373, 4.10
Re: Where does neg battery cable bolt to?

That's where I bolted it to, except on the opposite side since my battery is on the other side of the car. That seemed to be the place it most easily reached to so I figured that's probably where it was from the factory. Thanks guys.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frozer!!!
Camaros for Sale
35
Jan 19, 2024 04:55 PM
5spdcamaro
Tech / General Engine
1
Aug 28, 2015 02:12 AM
Jae992
TBI
3
Aug 27, 2015 09:07 AM
Accerrito22
Electronics
3
Aug 23, 2015 07:22 PM




All times are GMT -5. The time now is 01:17 AM.