Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Performance Help

Old Jul 9, 2009 | 01:29 AM
  #1  
ironman607's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 6
Likes: 0
Performance Help

Hey all I have a 91 firebird 3.1L v6 fuel injected automatic. What I am looking to do is either better the v6 or is it possible to put in a bigger engine. So does anyone know good performance upgrades that will make my v6 faster or what engine swap can I do. Thanks
Reply
Old Jul 9, 2009 | 08:07 AM
  #2  
84 z28's Avatar
Supreme Member
 
Joined: Apr 2006
Posts: 1,801
Likes: 21
From: Rochester NY
Car: 1984 z28
Engine: 355
Transmission: 700r4
Axle/Gears: Moser 9" 4.11
Re: Performance Help

Originally Posted by ironman607
Hey all I have a 91 firebird 3.1L v6 fuel injected automatic. What I am looking to do is either better the v6 or is it possible to put in a bigger engine. So does anyone know good performance upgrades that will make my v6 faster or what engine swap can I do. Thanks
Dont play around with the V6 its just money down the drain. Upgradeing is the way to go. Just drop in a 350 and a V8 700r4 and your good to go.
Reply
Old Jul 9, 2009 | 05:54 PM
  #3  
ironman607's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 6
Likes: 0
Re: Performance Help

Thats the thing will that bolt up into what i have and do you have any guess as to how much that could be.
Reply
Old Jul 9, 2009 | 07:55 PM
  #4  
Blackdog36's Avatar
Senior Member
15 Year Member
iTrader: (3)
 
Joined: May 2009
Posts: 562
Likes: 27
From: Buffalo, NY
Car: 92 Z28
Engine: LS3
Transmission: TR6060
Axle/Gears: Strange S60 3.73
Re: Performance Help

I agree, a swap to 350 would be best for performance. I would swap in a LS1 V-8 engine form a 90's camaro/firebird. It might be a good idea to buy a junk car to use for donor parts (engine, transmission, wire harnesses, rear end, disc brakes, etc).

Have any pictures of your bird to post?

Check out these posts in the Engine swap section. They should give you a good head start.

https://www.thirdgen.org/forums/engi...1-lt1-tpi.html
https://www.thirdgen.org/forums/engi...third-gen.html
https://www.thirdgen.org/forums/engi...swap-read.html
Reply
Old Jul 9, 2009 | 08:21 PM
  #5  
ironman607's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 6
Likes: 0
Re: Performance Help

i agree as well that swap would be good but unfortunatly im trying to do the best for the money which is my biggest problem. since i dont have the tools myself i would have to send it to a shop and the labor i would imagine would be expensive plus i would have to upgrade the rear and front and other stuff to support a v8. i was considering putting a performance chip, cam, performance intake manifold, performance thermostat, and k&n intake. only i dont know where to go to get a cam or if i can even get one for a good price that will work. any tips?
Reply
Old Jul 9, 2009 | 08:55 PM
  #6  
84 z28's Avatar
Supreme Member
 
Joined: Apr 2006
Posts: 1,801
Likes: 21
From: Rochester NY
Car: 1984 z28
Engine: 355
Transmission: 700r4
Axle/Gears: Moser 9" 4.11
Re: Performance Help

Originally Posted by ironman607
i agree as well that swap would be good but unfortunatly im trying to do the best for the money which is my biggest problem. since i dont have the tools myself i would have to send it to a shop and the labor i would imagine would be expensive plus i would have to upgrade the rear and front and other stuff to support a v8. i was considering putting a performance chip, cam, performance intake manifold, performance thermostat, and k&n intake. only i dont know where to go to get a cam or if i can even get one for a good price that will work. any tips?
If your stuck on a V6 the best thing to start looking into is a turbo.
Reply
Old Jul 9, 2009 | 10:56 PM
  #7  
ironman607's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 6
Likes: 0
Re: Performance Help

i was thinking of putting a turbo on but the turbos i have seen run as much as a new engine would. do you know a type specifically that would work?
Reply
Old Jul 10, 2009 | 06:31 AM
  #8  
84 z28's Avatar
Supreme Member
 
Joined: Apr 2006
Posts: 1,801
Likes: 21
From: Rochester NY
Car: 1984 z28
Engine: 355
Transmission: 700r4
Axle/Gears: Moser 9" 4.11
Re: Performance Help

Originally Posted by ironman607
i was thinking of putting a turbo on but the turbos i have seen run as much as a new engine would. do you know a type specifically that would work?
I dont know alot about turbos but I found this on ebay

http://cgi.ebay.com/ebaymotors/TWIN-...Q5fAccessories

Go to the power adder section in here and ask what you will need to do to throw some turbos in your car.

https://www.thirdgen.org/forums/power-adder/
Reply
Old Jul 10, 2009 | 11:01 AM
  #9  
ironman607's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 6
Likes: 0
Re: Performance Help

thanks so much for the help
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Linson
Auto Detailing and Appearance
28
Oct 24, 2025 02:00 PM
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
jrdturbo
Firebirds for Sale
26
Mar 31, 2016 02:58 PM
armybyrd
Carburetors
3
Oct 20, 2015 03:57 AM
SRKLEGIN
Interior Parts Wanted
5
Oct 12, 2015 07:28 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:07 AM.